What license is required to drive a yellow-plate Jinbei vehicle?

2 Answers
Dave
07/24/25 10:21am
C1 driver's license can drive Jinbei vehicles with 9 seats or less. The vehicle types that a C1 license is permitted to drive are small vehicles with 9 seats or fewer and a body length not exceeding 6 meters. For Jinbei models, as long as the number of seats does not exceed 9 and the body length does not exceed 6 meters, they can be driven with a C1 license. C1, C2, B1, and B2 are all types of driver's license codes. Below is the content introduction: 1. B1: Medium-sized passenger vehicles (including those with a capacity of 10 to 19 people and a vehicle length of less than 6 meters). 2. B2: Heavy and medium-sized trucks; large, heavy, and medium-sized special-purpose vehicles (such as concrete mixer trucks, fire trucks, etc.). 3. C1: Small and mini passenger vehicles (with 9 seats or fewer and a body length of less than 6 meters) as well as light and mini trucks; light, small, and mini special-purpose vehicles. 4. C2: Small and mini automatic transmission passenger vehicles as well as light and mini automatic transmission trucks.
Was this review help?
6
3
Share
VonTucker
08/11/25 5:30am
Answer 1
Was this review help?
4
0
Share
Expand All
More Forum Discussions

Does a car manufactured in July 2014 need an inspection this year?

2014 vehicles must undergo mandatory on-site annual inspections before their 2020 inspection validity period expires, as per regulations. Summary: According to regulations, vehicles are required to undergo on-site inspections during their 6th and 8th years. For privately-owned vehicles over 10 years old, the original inspection cycle still applies: annual inspections for vehicles aged 10-15 years, and semi-annual inspections for those over 15 years. Vehicle owners may apply for inspection compliance marks at the local vehicle management office within 3 months prior to the expiration of their current inspection period. Additional Information: During annual inspections, it's crucial to ensure optimal braking performance - replace brake pads if necessary. The braking system represents one of the most critical safety indicators and is mandatory for inspection. Therefore, pre-inspection checks on the braking system are essential before annual examinations.
13
5
Share

What are the differences between the Roewe ei6 and the Velite 6?

The differences between the Roewe i6plus and the Velite 6 are as follows: Engine: The Roewe i6plus is equipped with a 1.6T L4 engine; the Velite 6 is a pure electric motor with 150 horsepower. Body type: The Roewe i6plus is a 4-door, 5-seater sedan; the Velite 6 is a 5-door, 5-seater hatchback. The Roewe i6plus features a brand-new front face design with a larger grille that integrates with the headlights. Based on the Rhythm design, it comes standard with a Rhythm Pro wing grille and a flat, wide-mouth design. It also includes a 66% high-strength steel cage body and a laser-welded one-piece roof. The Velite 6 has a winged grille that connects the left and right headlight clusters, extending across the front face to elongate the visual effect. The rear features a dynamic and stylish floating roof design, with blackened LED taillights that include an L-shaped light strip. The model badge on the rear of the Velite 6 indicates its identity.
9
1
Share

Where is the license plate number Wan O from?

Wan O is a license plate number used by government law enforcement departments for vehicles, not for civilian use. It belongs to a special category of license plates. Here is an introduction to license plates with the character "Wan": 1. The first Chinese character on a license plate represents a municipality or province, and the letter following the first character represents a city or district. "Wan" is the abbreviation for Anhui Province. If the first character on a license plate is "Wan," it means the vehicle is from Anhui. 2. Wan A represents Hefei, Wan B represents Wuhu, Wan C represents Bengbu, Wan D represents Huainan, Wan E represents Ma'anshan, Wan F represents Huaibei, Wan G represents Tongling, Wan H represents Anqing, Wan J represents Huangshan, Wan K represents Fuyang, Wan I represents Suzhou, Wan M represents Chuzhou. Additional information: To register a new vehicle, the owner needs to bring their ID card, vehicle purchase tax payment certificate, compulsory traffic insurance policy, vehicle qualification certificate, purchase invoice, etc. After registration, the vehicle can legally drive on the road.
14
5
Share

How many times can the C1 subject 4 test be taken?

C1 subject 4 test is a theoretical test on safe and civilized driving, with no specific limit on the number of attempts. You can retake it an unlimited number of times within the specified period. Passing standards for the C1 driver's license test: Traffic regulations and related knowledge (Subject 1) — Written test, full score is 100, 90 or above is passing. Field driving (Subject 2) — On-site, actual vehicle. The minimum requirement is 80 points, below 80 is failing. Road driving (Subject 3) — Highway or simulated field, actual vehicle. Full score is 100, must achieve 90 or above to pass. Safe and civilized driving knowledge — Written test, questions mainly in the form of case studies, pictures, animations, etc., including true/false, single-choice, and multiple-choice questions, totaling 50 questions, full score is 100, 90 is passing. Age requirements for C1: The minimum age limit for a C1 driver's license is 18 years old, with no upper age limit. However, applicants aged 70 or older must pass tests on memory, judgment ability, reaction ability, etc.
1
0
Share

Is the Replacement Date of the Driver's License the Original Date?

The replacement date of the driver's license is the original date. Replacing a driver's license involves reissuing a copy of the license and does not alter the original issuance date or the validity period of the license. Materials required for replacing a driver's license: Identity proof and a copy of the identity document of the motor vehicle driver. A photo for the driver's license; if applying through an agent, a power of attorney and the agent's identity proof and a copy must also be submitted; a written statement declaring the loss of the driver's license; if simultaneously applying for a renewal due to expiry, submit the "Motor Vehicle Driver Physical Condition Certificate"; if applying for a replacement at a vehicle management office outside the jurisdiction where the driver's license was originally issued, an application for transfer must be completed as required, submitting the original "Motor Vehicle Driver Physical Condition Declaration Form". Notes on replacing a driver's license: If a motor vehicle driver's license is lost, the driver should apply for a replacement at the vehicle management office where the license was originally issued or at another office outside the jurisdiction. After the driver receives the replacement license, the original license becomes invalid and must not be used. During the period when the driver's license is legally seized, detained, or temporarily suspended, the driver cannot apply for a replacement.
9
5
Share

Where is the fuel pump relay located in a 2008 Toyota Corolla?

The fuel pump relay in a 2008 Toyota Corolla is located in the large fuse box on the left side of the engine compartment. When the relay is operating, the electromagnet is energized, pulling the armature down to make contact between D and E, thereby closing the working circuit. When the electromagnet is de-energized, it loses its magnetism, and the spring pulls the armature back up, cutting off the working circuit. Working principle of the fuel pump relay: When a certain voltage or current is applied to both ends of the electromagnetic relay coil, the magnetic flux generated by the coil passes through the magnetic circuit composed of the iron core, yoke, armature, and working air gap of the magnetic circuit. Under the action of the magnetic field, the armature is attracted to the pole face of the iron core, thereby pushing the normally closed contacts to open and the normally open contacts to close. When the voltage or current at both ends of the coil falls below a certain value, and the mechanical counterforce exceeds the electromagnetic attraction, the armature returns to its initial state, causing the normally open contacts to open and the normally closed contacts to close. Composition of the relay: The relay can be viewed as an assembly consisting of two parts: the control circuit where the coil operates and the main circuit where the contacts operate.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.