···
Log in / Register

Does a car registered in July 2013 require an annual inspection in 2021?

6Answers
VonBrynlee
07/29/2025, 12:48:49 PM

If the vehicle underwent its last annual inspection before the new policy implementation on November 20, 2020, it will require an inspection in 2021; if the inspection was conducted after November 20, 2020, it will not need an inspection in 2021. Here is relevant knowledge about vehicle annual inspections: Annual inspections for private cars over 10 years old: For private cars that have been in use for more than 10 years, the inspection cycle still follows the original regulations, i.e., an annual inspection is required for cars between 10 to 15 years old, and a semi-annual inspection for cars over 15 years old. Annual inspection precautions: Large decorative stickers on the car body or large eye-catching car club logos are considered unauthorized modifications to the vehicle's appearance and will not pass the annual inspection.

Was this review help?
115
Share
Devin
08/14/2025, 02:31:50 AM

I just checked my records, and indeed, my car purchased in July 2013 needed an annual inspection by 2021, as it was exactly 8 years old at that time. According to the policy, non-commercial passenger vehicles enter a phase of biennial on-site inspections after 6 years, primarily checking brakes, lights, and emissions to ensure road safety. I remember there were a lot of people during the inspection that year, so I'd recommend making an appointment in advance and bringing your vehicle registration and compulsory traffic insurance policy. Regular maintenance of tires and the battery can help avoid hassles during inspections, as minor issues found may require repairs, costing both time and money. Overall, annual inspections are for everyone's safety—don't take them lightly, or you might face fines and insurance complications. Older cars require more diligent maintenance, and this expense is worth it.

Was this review help?
10
Share
Expand All
SanGabrielle
08/14/2025, 02:32:14 AM

Yes, an annual inspection is required. According to the policy, a 2013 vehicle must undergo an on-site inspection in its 8th year by 2021. My trick is to check the opening hours of local inspection stations in advance, and bring copies of the vehicle license and insurance policy. The inspection items include emissions and braking systems. Pay regular attention to turn signals and horn functionality to avoid minor rework. Although the car is a bit older, proper maintenance keeps it running well. Budget a few hundred yuan, and going during off-peak hours can speed up the process.

Was this review help?
7
Share
Expand All
BrynleeRose
10/12/2025, 11:17:28 PM

A car from July 2013 would have been 8 years old by 2021, so it definitely requires an annual inspection. According to the new regulations, vehicles aged between 6 to 10 years only need to undergo an on-site inspection every two years, and 2021 falls right within this interval. The inspection includes checks on exhaust emissions and the performance of safety equipment. It's advisable to prepare the owner's documents in advance to avoid unnecessary trips. As a car owner, I recommend regularly checking the tire tread and lighting system. If they are severely worn, replace them directly to avoid failing the inspection. Although this might seem like a minor issue, delaying it could affect driving safety. The cost is generally a few hundred yuan, and handling it early saves trouble. A well-maintained older car can still run for a long time, which is a significant benefit.

Was this review help?
7
Share
Expand All
SanReid
11/25/2025, 11:16:46 PM

Annual inspection is mandatory. For an 8-year-old vehicle, policy requires periodic checks to eliminate aging risks, such as brake and electrical systems prone to failure. During inspection, professionals conduct comprehensive safety tests. Neglecting it may lead to accidents or fines. Safety always comes first—don't wait for problems to regret. Book an inspection station in advance and check fluids and cooling systems to pass smoothly.

Was this review help?
17
Share
Expand All
ClaraDella
01/16/2026, 12:44:46 AM

Of course, it must go for the annual inspection! I've seen owners of the same model year busy with this last year. A car from July 2013 will be 8 years old by 2021, and the policy states that emissions and safety equipment must be inspected every two years. While inspecting the car, it's a good idea to clean the body as well—dirt can easily cause issues. Don't procrastinate; overdue fines mean paying unnecessary money. Safe driving relies on details, and the annual inspection is a basic step—just handle it simply.

Was this review help?
14
Share
Expand All
More Q&A

What is the tire specification of the Zotye T600?

The tire specification of the Zotye T600 is 235/60R18, paired with 18-inch double five-spoke wheels that create a sporty and visually appealing effect. The Zotye T600 is the first mid-size SUV model under the Zotye brand, with dimensions of 4631mm in length, 1893mm in width, and 1694mm in height, and a wheelbase of 2807mm. The Zotye T600 is equipped with either a 1.5T or 2.0T engine. The 1.5T engine is paired with a 5-speed manual transmission, while the 2.0T engine comes with either a 5-speed manual or a 6-speed dual-clutch automatic transmission, offering two-wheel-drive versions. Standard features across the Zotye T600 lineup include front dual airbags, ABS with EBD, trip computer, driver's seat lumbar support, 4-way manual adjustment for the front passenger seat, rear center armrest, and electric trunk opening.
113
Share

How to adjust the time on the Highlander?

The method to adjust the time on the Highlander is: 1. Press and hold the disp button on the steering wheel for 5 seconds; 2. A menu will appear on the multifunction display, select the first option to adjust the time; 3. Press the disp button again to enter, first adjust the hour, then the minutes will start blinking to adjust the minutes. Taking the 2020 Highlander as an example, its body dimensions are: 4890mm in length, 1925mm in width, and 1715mm in height. The 2020 Highlander features a MacPherson strut front suspension and an E-type multi-link rear suspension. It is equipped with a 2.0L inline 4-cylinder turbocharged engine, with a maximum horsepower of 220ps, a maximum power of 165kw, and a maximum torque of 350nm, paired with a 6-speed automatic transmission.
101
Share

How to open the hood of the XT5?

XT5 hood opening method: Sit in the driver's seat, there is a lever in front of your knees that you can pull, then the hood will pop up. Next, reach into the gap in the raised hood handle and pull the inner lever to open it. The XT5 is a mid-size luxury SUV from the Cadillac brand, with body dimensions of 4812mm in length, 1903mm in width, and 1680mm in height, and a wheelbase of 2857mm. The XT5 adopts the design concept of the BFI integrated high-strength body frame, achieving lightweight and high strength through optimized frame design, efficient material application, and innovative connection techniques. The XT5 features a curved open-front longitudinal beam, which not only expands the coverage of the front collision energy absorption zone but also allows more materials to participate in deformation and energy absorption during a collision.
113
Share

What is the method to determine if an expansion valve is functioning properly?

To determine if an expansion valve is functioning properly: 1. Connect the expansion valve to the high and low-pressure ends of the manifold gauge, with the middle hose connected to the injection valve to introduce refrigerant. 2. Place the capillary tube of the expansion valve into a water tank and observe the water temperature and the pressure on the high-pressure gauge. 3. Operate the high-pressure manual valve to bring the high-pressure gauge needle to 490 kPa, allowing refrigerant to discharge from the expansion valve in gaseous form. 4. If the intersection of the water temperature and high-pressure gauge pressure values falls between the water temperature and high-pressure curves, the expansion valve is functioning normally. If it does not fall between these curves, the expansion valve should be repaired or replaced. Common symptoms of expansion valve failure include: 1. The low-pressure pipe not feeling cold to the touch. 2. Frost forming on the dryer or condenser. 3. No hissing sound heard at the expansion valve or condenser.
120
Share

Where is Kia from?

Kia is from South Korea, sharing platform technology with Hyundai Motor and collaborating with Dongfeng Motor Corporation in China, hence the name Dongfeng Kia. The dimensions of the Kia K5 are 4845mm in length, 1830mm in width, and 1460mm in height, with a wheelbase of 2795mm. The Kia K5 is equipped with two naturally aspirated engines: a 2.0L and a 2.4L. The 2.0L engine delivers a maximum power of 165 horsepower and a maximum torque of 198Nm, while the 2.4L engine offers a maximum power of 179 horsepower and a maximum torque of 231Nm. Both engines are paired with a 6-speed manual or a 6-speed automatic transmission. The Kia K5 features a large-screen DVD navigation system, a stylish LCD instrument panel, and numerous function buttons including engine start-stop, ECO driving mode, and seat heating and ventilation.
105
Share

Where is the Land Cruiser engine number located?

The Land Cruiser engine number is located on the front cylinder block of the engine under the engine hood. This engine number position is relatively concealed. After turning the left front wheel outward to its maximum, you can reach into the wheel gap and feel the engine number with your hand. In addition to the method mentioned above, the engine number can also be checked through the following 4 ways: The vehicle's driving license prints the engine number, usually located on the second last line; The motor vehicle registration certificate will state the engine number; The car purchase invoice will state the engine number; The vehicle purchase tax payment certificate will state the engine number. It should be noted that the engine number is not the same as the engine model. The engine model refers to the specification and size of the engine within the manufacturer, and engine models can be the same. The engine number refers to the production number of the engine, each engine can only use one engine number and each engine's number is unique. The engine number consists of four parts, each representing different meanings. The first part includes the product series code, generation symbol, and local or enterprise code, which are selected by the manufacturer as needed and approved by the industry standard authority; the middle part consists of the cylinder number symbol, cylinder arrangement symbol, stroke symbol, and cylinder diameter symbol; the rear part consists of the structural feature symbol and usage feature symbol; the tail part is the distinguishing symbol, used to differentiate products within the same series due to improvements or other reasons, selected by the manufacturer.
109
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.