···
Log in / Register

What License is Required for Automatic Transmission Vehicles?

6Answers
LeAnthony
07/28/2025, 03:16:06 AM

Automatic transmission vehicles require a C2 driver's license. Additionally, holders of A1, A2, A3, B1, B2, and C1 licenses are also permitted to drive automatic transmission vehicles. The examination process for a C2 license consists of: Subject 1: Computer-based test with 100 questions, requiring a score of 90 or above to pass. Test content includes driving theory basics, road safety laws and regulations, traffic signals, and traffic rules. Subject 2: Practical test covering reverse parking, parallel parking, S-curve driving, right-angle turns, and stopping and starting on a slope, with a passing score of 80. Subject 3: On-road test including preparation before driving, starting, driving straight, gear shifting, lane changing, pulling over, passing through intersections, left and right turns, crossing pedestrian crossings, passing school zones and bus stops, meeting oncoming vehicles, overtaking, making U-turns, and night driving, with a passing score of 80. Subject 4: Computer-based test focusing on safe and civilized driving requirements, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident handling procedures.

Was this review help?
101
Share
JaylaDella
08/11/2025, 10:48:56 AM

I've worked at a driving school for many years and seen many students struggle with license types. Automatic transmission cars correspond to the C2 license, specifically designed in China's driving license system. When taking the C2 test, you use an automatic transmission car throughout, without needing to operate the clutch, which greatly reduces stress for beginners. If you usually drive automatic cars, this license is perfectly sufficient. Some people opt for the C1 license to drive manual transmission cars for greater flexibility, but automatics are much quicker to learn and easier to pass the test. In terms of safety, automatics eliminate stalling issues, making them more suitable for congested city driving. My advice is to choose based on your needs—if you're focused on commuting, C2 is a smart starting point.

Was this review help?
12
Share
Expand All
StCarlos
09/27/2025, 10:09:26 PM

I remember when I went to get my driver's license last year, the instructor said automatic transmission is much simpler, corresponding to the C2 category. This license only permits driving small automatic cars, and the test items are easier than manual transmission, with no gear-shifting operations. Legally, C2 has more restrictions, but it saves time and costs, suitable for those who only want to drive automatics. I learned quickly and passed in just a few weeks. In daily driving, automatics avoid many failure risks like stalling or clutch wear. If you're on a budget, prioritize C2 as the training fees are usually lower.

Was this review help?
10
Share
Expand All
McGrant
11/10/2025, 11:05:02 PM

Hi, my friend just finished driving school and opted for an automatic transmission C2 driver's license. This is specifically for automatic transmission vehicles in China, with a shorter learning period and easier exams. The C2 license is suitable for beginners or young people, reducing operational difficulty. During training, they only practice with automatic transmission cars, focusing on steering and braking, making it very quick to get the hang of. Regulations require that they can only drive automatic transmission vehicles, which is sufficient for daily commuting. In terms of safety, there are fewer mechanical issues, making driving more reassuring. Choosing C2 allows for quickly obtaining a driver's license and hitting the road.

Was this review help?
15
Share
Expand All
DiEliana
01/01/2026, 12:49:52 AM

From over a decade of driving experience, automatic transmissions are safe and reliable. Its exclusive license is the C2 type, and the test only involves automatic transmission vehicles. China's driver's license system clearly distinguishes between C1 and C2, with C2 specifically designed for automatic transmissions, featuring simple operations suitable for everyone. Beginners find it less prone to errors during tests, resulting in a high pass rate. Driving without worrying about gear shifting makes it more relaxed, especially in urban traffic jams. Choosing C2 saves energy and has a lower learning cost. In the long run, it encourages safer driving habits.

Was this review help?
15
Share
Expand All
DelAna
03/29/2026, 02:12:31 AM

During the process of learning to drive, I found that the automatic transmission C2 driver's license offers great value for money. It is a test category specifically designed for automatic transmission vehicles, featuring shorter training periods and lower costs. Learning to drive an automatic is simpler than a manual, as the test does not involve the clutch. The C2 license only restricts driving to automatic transmission models, making it very practical for everyday use. The test is easier to pass, making it suitable for beginners. Considering both time and financial costs, obtaining a C2 license allows for quicker certification, saving both effort and money. Safe driving is prioritized even more.

Was this review help?
9
Share
Expand All
More Q&A

What is the solution for BMW 5 Series burning engine oil?

Pay attention to regular oil changes. Regular oil changes can not only ensure oil quality but also ensure the engine performs at its best. You can also follow the oil change mileage recommended in the user manual or specified for the vehicle model. More extended information is as follows: 1. Pay attention to frequent oil level checks: When using engine oil, it is essential to regularly check the quality and quantity of the oil in use. This is because the crankcase must have sufficient oil to ensure the engine's normal lubrication state. If the oil level is too low, it can cause parts to burn out and accelerate oil deterioration. If the oil level is too high, it can seep into the combustion chamber through the gap between the cylinder and piston, increasing carbon deposits in the combustion chamber. Therefore, the oil level in the crankcase should be checked frequently, and oil should be added promptly if it is insufficient. 2. Pay attention to regular oil changes: Note that different types of engine oil cannot be mixed. Special gasoline engine oil cannot replace diesel engine oil, mainly to avoid accelerating diesel engine wear. Since gasoline engine oil and diesel engine oil differ in usage, they can only be substituted if the manufacturer provides a substitution note or labels the oil as suitable for both gasoline and diesel engines, or if it is within the specified grade range.
115
Share

Do Retreaded Tires Have Rubber Hairs?

Retreaded tires do not have rubber hairs. Here are the relevant details: 1. Some new tires have rubber hairs, while others do not. Tires are a very important component of a car, being the only part that comes into contact with the ground. Therefore, tires play a crucial role in driving stability and safety. 2. It is recommended that car owners avoid purchasing retreaded tires, as they pose significant safety risks. Tires are rubber products, and it is advisable to replace them every four years, even if the mileage is low. Rubber products degrade over time, and using severely aged tires can be hazardous. 3. During regular use, it is essential to frequently check tire pressure and inspect the tire surface for any damage. Tire pressure is critical for tire performance—it should neither be too high nor too low. Overinflation reduces the tire's contact area with the ground, diminishing grip and affecting handling. Underinflation, especially at high speeds, can cause the tire to deform in waves, increasing the risk of a blowout.
106
Share

What to Do If the Engine Burns Oil?

For older vehicles, using oil with higher viscosity can enhance the sealing of the cylinders, not only improving power but also alleviating minor oil burning issues. The best solution is to perform maintenance as soon as possible. Otherwise, prolonged oil burning will not only lead to significant oil consumption but also increase carbon deposits in the combustion chamber due to the impurities generated from burning oil, thereby affecting engine performance. Below are the reasons for engine oil burning: 1. Using oil of poor quality or with viscosity grades that do not meet requirements. Low-quality oil can accelerate wear, and oil with viscosity that is too low or too high can result in poor engine lubrication, increasing wear on piston rings and cylinder walls, reducing sealing performance, and leading to oil burning. 2. Poor cylinder sealing is the main cause of oil burning. Poor cylinder sealing is primarily due to excessive clearance between the piston and cylinder wall, improper installation of piston rings, or degraded sealing, allowing oil on the cylinder walls to enter the combustion chamber and causing oil burning.
105
Share

How to Turn Off the Automatic Locking Function?

The automatic locking function of the vehicle cannot be set by the owner themselves. This needs to be configured at a 4S dealership, requiring the vehicle's onboard computer program to be updated in order to permanently disable the automatic locking feature. Automatic locking refers to the central locking system automatically engaging when the vehicle's speed exceeds a certain threshold, ensuring the safety of the driver and passengers. The purpose of the automatic locking function is anti-theft, allowing the doors to lock quickly after driving starts to prevent door-pull robberies during traffic jams or at red lights, providing a certain level of security. The central locking system is a combination of mechanical and electronic devices; in the event of an accident where electronic devices fail, passengers can still manually unlock and open the doors to escape.
108
Share

What is the power shift pressure of the Caterpillar 320D?

Power shift pressure gauge measurement shows 40 kg high pressure and 24 kg low pressure. Here are the relevant details: 1. Slow working speed: Maximum rpm drop during operation is 240, stalling drops to 500+ at 30°C ambient temperature with 1600 rpm, water temperature 90+ and oil temperature 75 - the equipment can hardly operate under these conditions. When the boom or stick is under load, rpm drops by 400+, though single pump operation remains unaffected. 2. Switch failure: The AEC single-contact idle switch fails, though switch status checks show normal. If the knob is rotated from 6 to 1 and back to 6, the AEC single-contact idle switch functions normally.
111
Share

What SUVs does GAC Honda have?

GAC Honda SUVs include the Honda Vezel, Honda Avancier, and Everus VE-1. GAC Honda is a joint venture company engaged in automobile production and research & development. Its product lineup includes the Avancier series SUVs, Accord series sedans, Odyssey multi-purpose vehicles, and other models. Taking the Honda Vezel as an example, it is the first SUV under GAC Honda. In terms of body dimensions, the Honda Vezel measures 4294mm in length, 1772mm in width, and 1605mm in height, with a wheelbase of 2610mm. As for its exterior design, the Honda Vezel features a winged front grille design with a mysterious and elegant black tone, integrating the grille and headlights to highlight its avant-garde and dynamic personality.
107
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.