What level of car does the Volkswagen T-Roc belong to?

Why does the fan only start working at the third speed setting but not the first?

Fan not operating at the first speed setting but only starting at the third speed is caused by a decrease in the capacitance of the fan starting capacitor. Replacing it with a capacitor of the same capacity will resolve the issue. Below is relevant information about automotive cooling fans: 1. Axial fans: The blades of an axial fan push air to flow in the same direction as the axis. The impeller of an axial fan somewhat resembles a propeller. During operation, the majority of the airflow moves parallel to the axis, meaning along the axial direction. The power consumption of an axial fan is lowest when the inlet airflow is free air at 0 static pressure, and it increases as the back pressure of the airflow rises during operation. 2. Centrifugal fans: When a centrifugal fan operates, its blades push air to flow in a direction perpendicular to the axis (i.e., radially). The intake is along the axial direction, while the exhaust is perpendicular to the axial direction.

1

2

Share

Is the first maintenance better at 3,000 kilometers or 5,000 kilometers?

The first maintenance is better at 3,000 kilometers, and the first maintenance at six months/5,000 kilometers should be the limit. The following is a related introduction to the first maintenance: 1. Running-in period: Precautions for driving before the first maintenance. The initial driving period of a new car is called the running-in period. Generally, you should not drive too fast, absolutely do not exceed 100 mph, and the engine speed should not exceed 3,000 rpm; A well-run-in vehicle will have a lower probability of problems in future driving and will also be more fuel-efficient. 2. First maintenance time: The first maintenance service for a new car is usually provided free of charge by the 4S store, and the time is according to the regulations in the car maintenance manual, which varies for each model.

2

1

Share

What does 'hand-operated clutch' mean?

For individuals with leg disabilities who cannot operate the clutch pedal with their feet, the clutch is modified to be positioned above and operated by hand through a backward pulling motion, hence termed as 'hand-operated clutch'. Location of the clutch: The clutch is situated within the flywheel housing between the engine and the transmission. The clutch assembly is secured to the rear plane of the flywheel with screws, and the output shaft of the clutch serves as the input shaft of the transmission. Usage of the clutch: During vehicle operation, the driver can depress or release the clutch pedal as needed to temporarily disconnect or gradually engage the engine with the transmission, thereby interrupting or transmitting the engine's power to the transmission. The clutch is a common component in mechanical transmission systems, allowing the drivetrain to be disconnected or engaged at any time.

10

0

Share

What does engine compression ratio mean?

Engine compression ratio refers to the degree to which the engine's air-fuel mixture is compressed, expressed as the ratio of the total cylinder volume before compression to the cylinder volume after compression (i.e., combustion chamber volume). Additional information: 1. The vast majority of automobiles use so-called "reciprocating engines", where a piston in the engine cylinder performs linear reciprocating motion repeatedly in cycles. Therefore, within these continuous working strokes, there is a specific range of motion. 2. For a particular engine cylinder, when the piston reaches its lowest point, this position is called bottom dead center, and the entire cylinder volume including the combustion chamber forms the maximum stroke volume. When the piston moves in the opposite direction and reaches the highest point, this position is called top dead center, resulting in the smallest volume condition during the entire piston stroke. The compression ratio to be calculated is the ratio of this maximum stroke volume to the minimum volume.

13

4

Share

Why are small cars mostly front-wheel drive?

Small cars predominantly use front-wheel drive due to lower manufacturing costs and higher efficiency. Front-engine, front-wheel-drive (FF): When the engine drives the front axle, it can be mounted transversely or longitudinally, and positioned outside the wheelbase, within the wheelbase, or above the front axle. Different layouts affect vehicle performance. This configuration is primarily adopted in passenger vehicles with engines under 2.5L displacement. FF cars typically feature a transversely mounted engine connected to a compact transaxle. Front-engine, four-wheel-drive (F4): F4 denotes an engine positioned at the front that powers all four wheels. With torque distributed to all wheels, F4 delivers superior handling compared to front- or rear-wheel-drive setups, making it the preferred choice for rally cars and off-road vehicles.

18

2

Share

How Many Cubic Meters of Earth and Stone Can a Truck Carry?

The amount of earth and stone a truck can carry depends on the height of the cargo. Generally, a 13.5-meter semi-trailer has a width of 2.5 meters, and the loading formula is length × width × height. Here are some precautions to take when driving such a vehicle: Do not wear a hat while driving: Even if wearing a hat does not cause a traffic accident, drivers may still be subject to criticism and education by traffic police during inspections and will be asked to remove the hat. Avoid fatigued driving: Drivers should not operate a motor vehicle if they have illnesses that affect safe driving or are overly fatigued. Generally, driving continuously for more than 4 hours or driving for more than 8 hours in total constitutes fatigued driving, and sufficient rest is required before continuing to drive.

6

2

Share

What level of car does the Volkswagen T-Roc belong to?

Why does the fan only start working at the third speed setting but not the first?

Is the first maintenance better at 3,000 kilometers or 5,000 kilometers?

What does 'hand-operated clutch' mean?

What does engine compression ratio mean?

Why are small cars mostly front-wheel drive?

How Many Cubic Meters of Earth and Stone Can a Truck Carry?

Is the L15B5 Engine an Earth Dream Type?

Where are the thick AB pads of the brake pads located?

What is the purpose of the line on the car rearview mirror?

What car is featured in Wolf Warrior 2?