···
Log in / Register

What kind of tires does the Audi A4L use?

4 Answers
Owen
07/28/25 8:24pm

Audi A4L uses tires from brands such as Michelin, Goodyear, Pirelli, and Dunlop, with tire sizes of 245/35R19, 245/40R18, and 225/50R17. Among them, the Goodyear Tire & Rubber Company in the United States was founded in 1898 and has a history of over a hundred years. Goodyear is the world's largest tire manufacturing company, headquartered in Akron, Ohio, USA. The company primarily produces tires, engineered rubber products, and chemical products in more than 90 factories across 28 countries. For the tires of the Audi A4L in daily use, the following points should be noted: Regularly check the tire surface for cracks, deformations, or other defects. Due to driving wear, the tread grooves of the tires gradually become shallow. If the tread is worn flat, it will lose its drainage and anti-skid functions, significantly reducing the car's performance. Small cracks may also pose a risk of tire blowouts during high-speed driving. Additionally, stones in the grooves should be promptly removed. Park on level ground whenever possible. Avoid parking the car on roads with thick, sharp, or pointed stones. The car should not be parked near or in contact with petroleum products, acids, or other materials that may cause rubber deterioration. After parking, the driver should not turn the steering wheel, as this can accelerate tire wear. Do not splash water to cool the tires. In hot weather or during high-speed driving, tires are prone to overheating, and the air pressure may increase. In such cases, the car should be parked to allow the tires to cool naturally. It is strictly prohibited to release air pressure or splash water to cool the tires, as this can cause abnormal aging of the tread rubber. Avoid sudden braking. Try to minimize frequent and abrupt braking to prevent accelerated tread wear caused by dragging between the tires and the ground.

Was this review help?
2
0
Share
MayaMarie
08/12/25 12:08am

The tires used on the Audi A4L are not fixed; new cars usually come equipped with brands like Continental, Michelin, or Pirelli, depending on the model year and configuration. You need to check the door label for the exact size, commonly 225/50R17. With years of experience researching cars, I believe choosing the right tires is crucial: they affect driving smoothness and fuel efficiency. For example, the Michelin Primacy series offers comfort and quietness, with strong wet-road grip. If tire noise increases over time, it's advisable to check the tread depth and replace them if it falls below 3mm. Regular maintenance is simple: check the tire pressure monthly, keeping it around 2.5 Bar, and rotate the tires every six months to prevent uneven wear. Safety first—don't skimp on quality; opt for reputable brands and ensure the speed rating is H or V to avoid issues at high speeds, which also helps extend tire lifespan.

Was this review help?
18
5
Share
Expand All
Giselle
09/30/25 7:14am

I drive a 2018 Audi A4L, which originally came with Continental PremiumContact tires. They provide a comfortable ride: stable on highways with low noise and smooth on city roads. However, they tend to slip on snowy roads in winter, so I switched to a set of Pirelli Scorpion winter tires, which made a noticeable improvement. The tire brand actually varies by vehicle batch, so don’t blindly follow the factory choice. After trying Michelin Primacy, I found them more fuel-efficient and quieter. For daily driving, I check tire pressure and wear every quarter, keeping it around 2.3Bar to prevent leaks or blowouts. If you’re buying a new A4L, I recommend choosing tires with a good reputation—if your budget allows, go for Bridgestone’s economical option. Good tires really enhance driving pleasure and safety.

Was this review help?
4
0
Share
Expand All
EvelynLynn
11/14/25 2:17am

From my practical car repair experience, checking the tires of an Audi A4L should start with the size: typically 225/50R17, but verifying the owner's manual is crucial. If the original tires are damaged, I recommend Continental or Hankook as replacements, as these brands offer good value for money; when purchasing, pay attention to the load index and speed rating, choosing H grade or higher. For maintenance, check the tire pressure monthly, with 2.5Bar being optimal, to avoid uneven wear; when replacing tires, it's advisable to go to a professional shop for balancing to ensure stable driving. From a safety perspective, don't opt for cheap options: inferior tires are prone to skidding in rainy conditions and have poor grip. Simple maintenance can prevent accidents.

Was this review help?
6
5
Share
Expand All
More Forum Discussions

How to adjust the time on the 8th generation Accord?

The method to adjust the time on the 8th generation Accord: Press and hold the SOUND button until you hear a beep, and the time on the LCD display will start flashing. Then, press the 4 button to adjust the hour, the 5 button to adjust the minutes, and the 6 button to set the minutes to 00. After adjusting to the correct time, press the SOUND button again, and the time will stop flashing, indicating that the time has been successfully set. The 8th generation Honda Accord is equipped with three engines: a 2.0L naturally aspirated engine, a 2.4L naturally aspirated engine, and a 3.5L naturally aspirated V6 engine. In terms of body dimensions, the 8th generation Accord measures 4945mm in length, 1845mm in width, 1480mm in height, and has a wheelbase of 2800mm.
1
1
Share

Where is the cigarette lighter fuse located in the Mazda6?

The cigarette lighter fuse in the Mazda6 is located inside the fuse box near the driver's left foot. Here is some information about the cigarette lighter: 1. The cigarette lighter is a component found in all cars, designed to provide a flame source for smokers. 2. Some cigarette lighter sockets remain powered even after the car is turned off, so it's better to plug and unplug devices as needed. When plugging or unplugging devices, avoid shaking them too forcefully, as this can lead to poor contact during subsequent use. In more severe cases, it may cause a short circuit, resulting in the fuse and external device burning out. Therefore, always remove devices vertically. 3. Remember to regularly clean the cigarette lighter socket to remove any foreign objects. Never allow conductive materials such as metal objects or liquids to enter, as this can cause short circuits and fuse blowouts.
3
5
Share

What Causes Abnormal Noise and Failure to Start When Igniting the Car?

The reasons for abnormal noise and failure to start when igniting the car are: insufficient battery power or low voltage. 1. Before turning off the car, forgetting to turn off the headlights or some electrical equipment may cause the battery to drain, resulting in insufficient power. 2. If the battery has been used for too long and is severely aged, the voltage may be insufficient, requiring replacement. Additional information: The method to determine whether the battery has sufficient power is: Turn the ignition key to the ON position (for push-button start models, press the start button twice without stepping on the brake), turn on the headlights, and observe if the light dims significantly or does not light up at all. You can also press the horn; if the sound is noticeably weaker than usual or does not sound at all, it can be concluded that the battery power is insufficient.
12
1
Share

What does AUTO-H mean on a BMW car?

The AUTO-H button indicator in the car refers to the automatic parking function equipped on BMW vehicles. When waiting at a traffic light, after stepping on the brake to stop the vehicle, this function will automatically engage the parking state, eliminating the need for the driver to keep pressing the brake pedal for a long time. To move again, simply press the accelerator pedal. Here is a brief introduction about AUTO-H: 1. The AUTO-HOLD system in cars is also known as the automatic parking assistance system. Its main function is to automatically determine the vehicle's specific state, pre-tension the electronic parking brake, and thus serve the purpose of parking. 2. This function has an independent button for activation and deactivation on vehicles equipped with an electronic parking brake. The AUTO-HOLD button is located behind the electronic parking brake. To use it, first press this button until the indicator light comes on, and the system will officially enter standby mode.
20
2
Share

Does the Cavalier have tire pressure monitoring?

The Cavalier's Xinyue and Xinshang trims come equipped with a tire pressure monitoring system. The tire pressure monitoring system functions by automatically monitoring the tire pressure in real-time while driving and alerts the driver in case of tire leaks or low pressure to ensure driving safety. Here is more information about the tire pressure monitoring system: 1. There are two main types of tire pressure monitoring systems: one is the indirect type (Wheel-Speed-Based TPMS, WSB), which uses the wheel speed sensors of the car's ABS system to compare the rotational speed differences between tires. The other is the direct type (Pressure-Sensor-Based TPMS, PSB). 2. This system uses pressure sensors installed in each tire to directly measure the tire pressure and transmits the pressure information from inside the tire to a central receiver module via wireless transmitters, then displays the tire pressure data for each tire. The system will automatically alert the driver when the tire pressure is too low or there is a leak.
15
3
Share

Does the Sylphy have ISOFIX interfaces?

The Sylphy is equipped with ISOFIX interfaces. They are located in the crevice between the backrest and the seat cushion of the rear seats, as well as at the upper rear part of the seats. The installation method for the ISOFIX fixation is as follows: 1. Simply align the ISOFIX interface of the child safety seat with the reserved slot on the seat, insert it, and then raise the support rod to complete the installation. 2. If the car does not have ISOFIX interfaces, you can use the LATCH interface for fixation or install ISOFIX interfaces yourself on the rear seats of the car. 3. Compared to the simple ISOFIX interface, LATCH solves the problem of no top fixation and, due to its non-rigid connection, has more lenient requirements for the anchor point positions of the car seats. 4. Locate the LATCH interface position and secure the hook strap to the car's LATCH interface.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.