What kind of gloves are required for the Subject 1 exam?

2 Answers
LeConnor
07/29/25 12:57am
Subject 1 exam requires disposable gloves. The precautions for the Subject 1 exam are as follows: 1. Confirm the test location in advance: After scheduling the Subject 1 exam, first confirm the test location clearly. Arrive at the test site one hour early on the exam day. 2. Bring necessary documents: Do not lose the exam permit. Candidates must bring a valid ID card for admission to the exam. 3. Confirm candidate information before answering questions: Check if the information on the screen matches your own. Ensure you are facing the camera directly. If the photo is incomplete or not captured, the score will be considered invalid. 4. Pay attention to frequently mistaken questions: Be cautious about questions that are commonly answered incorrectly during practice. Careful reading of the questions is crucial. 5. Maintain a calm mindset: Answer questions patiently, as there is ample time to complete the exam.
Was this review help?
17
0
Share
DiHazel
08/12/25 5:07am
Actually, there's no need to prepare gloves for the Subject 1 test at all. The theoretical test is entirely computer-based, and the test center provides disinfected mice and keyboards. Wearing gloves may actually interfere with touchscreen operation. When accompanying a friend to take the test the other day, I noticed many people weren't aware of this. The entire test process takes about half an hour, with relatively low frequency of finger contact with the equipment. If hygiene is a real concern, test centers usually provide hand sanitizer. Remember that the truly essential items for the test are the original ID card and admission ticket. Don't play with your phone while waiting, or you might be penalized for cheating. Gloves can actually come in handy for the Subject 3 road test, especially in winter when the steering wheel is cold - anti-slip gloves do improve handling.
Was this review help?
11
5
Share
Expand All
More Forum Discussions

How to Deal with Foreign Objects Inside the Car After Tinting Film Application?

Gently peel off the applied car film and prepare to reapply it. Spray a small amount of installation liquid on the outer surface of the glass, cover it with the window film, and trim the film along the edges. Spray installation liquid on the adhesive side of the window film, apply the film to the glass, reposition it if necessary, spray more installation liquid, and use specialized tools to remove the excess liquid.
7
1
Share

How to Turn on the Lights at Night for an Automatic Transmission Car?

Open the driver's side door of the automatic transmission car. Press down on the brake pedal of the automatic transmission car. Press the one-touch start button of the automatic transmission car to start the engine. The dashboard lights up, indicating that the engine of the automatic transmission car has been started. Rotate the headlight switch of the automatic transmission car to turn on the headlights.
9
3
Share

How to Open and Replace the Battery in a Nissan Sylphy Remote Key?

First, remove the mechanical key, then use a flat-head screwdriver to pry open a small gap from the side seam of the key. Continue prying along the opening to separate the seams. Insert your fingernail into the middle seam of the remote, gently squeeze, and apply slight outward force to open the key's outer shell. Use a flat-head screwdriver to remove the old battery and insert the new one. Then reinstall the circuit board into place, align the key cover properly, and snap the outer shell back together.
8
5
Share

How to Accelerate a Motorcycle from 0 to 100?

Increase torque by replacing the engine's small sprocket with one that has fewer teeth and the rear wheel's large sprocket with one that has more teeth, but this will reduce the top speed. Replace the cylinder and piston with larger ones, but this is more complicated, and the quality of aftermarket cylinders and pistons may not be as reliable as the original parts. Adjust the mixture slightly richer and replace the carburetor with one that has an accelerator pump, but this will increase fuel consumption.
15
0
Share

What to Do When the Clutch Pedal is Hard to Press?

First, press the clutch pedal several times while the car is running to see if there's any improvement in gear shifting. If there is improvement, it indicates air in the clutch hydraulic system. Bleed the air and try again. If the hydraulic fluid level is sufficient, check around the clutch master cylinder and slave cylinder for any signs of oil leakage. If leakage is found, replace the leaking slave cylinder or master cylinder. The clutch disc needs replacement as it wears out over time. Replacing the clutch disc requires separating the engine from the transmission.
4
0
Share

How to Adjust the Two Screws on the Cruze Headlights?

Drive the car to a relatively flat road surface, adjust the low beam point to 30 meters apart with two points overlapping, and adjust the high beam point to be parallel to the ground. Park the car about 7.5 meters away from the wall, ensuring that the car is perpendicular to the wall and level with the ground. Adjust the vertical adjustment screw until the headlight beam is centered on the tape on the wall. Measure the height of the headlights and the beam on the wall. If the heights are consistent, it indicates that the headlight adjustment is perfect.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.