What kind of engine oil is used for the New Vision?

1 Answers
StBrayden
07/30/25 5:38am
The New Vision is equipped with a 1.5L naturally aspirated engine, and this car can use engine oil with a viscosity of 20 or 30. There are three types of engine oil: full synthetic oil, semi-synthetic oil, and mineral oil. Engine oil needs to be changed regularly, and the interval for oil changes depends on the type of oil used, driving habits, and road conditions. Each time the engine oil is changed, the oil filter should also be replaced. The New Vision has a body length, width, and height of 4599mm, 1747mm, and 1482mm respectively, with a wheelbase of 2615mm.
Was this review help?
20
0
Share
More Forum Discussions

What Causes Engine Overheating?

Engine overheating can be caused by: 1. Malfunctioning or failed temperature control switch, poor contact in relays or circuits, blown fuse, or delayed ignition timing; 2. Poor water pump performance, loose or oil-contaminated fan belt causing slippage, insufficient or leaking coolant, or lack of oil in the silicone oil clutch; 3. Improper adjustment of the distance or angle between the fan and radiator, faulty or incorrectly installed thermostat, or improper louver opening; 4. Scaling in the water jacket, dirty radiator exterior or excessive internal deposits, delaminated or clogged inlet/outlet rubber hoses; 5. Incorrect valve timing, excessively rich or lean air-fuel mixture, incorrect fuel type, excessive carbon buildup in the combustion chamber, or clogged muffler; 6. Excessive load, insufficient engine oil, or poor oil circulation.
19
5
Share

Where is the oil filter located on the 2018 AX7?

The oil filter on the 2018 AX7 is located near the engine, possibly on either side or underneath. The oil filter, also known as the oil purifier, functions to remove impurities, gums, and moisture from the engine oil, delivering clean oil to all lubrication points. The 2018 AX7, developed and manufactured by Dongfeng Fengshen, is a self-owned brand SUV model with body dimensions of 4696mm in length, 1850mm in width, and 1712mm in height. The 2018 AX7 features the Interactive Geometry 2.0 design concept, incorporating a new track emblem, luxurious matrix full-LED headlights, an IHBC intelligent high-beam control system, Wind Wing independent LED daytime running lights, a full-LED continuous family-style taillight strip, 19-inch aero rims paired with Pirelli tires, enabling it to handle various complex road conditions with ease.
12
3
Share

What are the body dimensions of the Elantra?

The body dimensions of the Elantra are 4620mm in length, 1800mm in width, and 1435mm in height, with a wheelbase of 2700mm. In terms of interior design, the Elantra's dashboard features a design tilted towards the driver's side, equipped with a new dual-dial instrument cluster, a new-style three-spoke multifunction steering wheel, an 8-inch central control display, and a separate air conditioning status display. For powertrain, the Elantra is powered by a new 1.4T engine, paired with a dual-clutch transmission. On the side profile, the Elantra adopts rising waistlines and triangular lines on the C-pillar to create a dynamic sense of forward motion.
6
4
Share

Can the free maintenance provided by a 4S store be used in another location?

With the warranty card from the 4S store, vehicle maintenance can be performed nationwide. Below is an introduction to vehicle maintenance: 1. Introduction: Vehicle maintenance, also known as car servicing, refers to the regular inspection, cleaning, replenishment, lubrication, adjustment, or replacement of certain parts as a preventive measure. 2. Coverage: Vehicle maintenance mainly includes servicing the engine system, transmission system, air conditioning system, etc., aiming to keep the vehicle clean, maintain normal technical conditions, eliminate potential hazards, prevent faults, and extend the service life. 3. Details: Minor maintenance generally refers to the routine maintenance tasks performed at the intervals or mileage specified by the manufacturer to ensure vehicle performance. This mainly includes changing the engine oil and oil filter.
1
0
Share

What Causes the Steering Wheel to Pull to One Side When Braking?

The reason the steering wheel pulls to one side when braking is due to uneven braking force between the left and right sides. If this occurs, it is necessary to have it adjusted at a professional facility. The braking system of a car is crucial as it directly affects the vehicle's driving safety and stability. The braking system mainly consists of a vacuum booster, master cylinder, wheel cylinders, brake pads, and brake discs. Methods for maintaining the braking system include: 1. Using professional brake disc cleaner—shake the can thoroughly before use and spray directly onto the areas needing cleaning until dust and oil stains are completely removed, then wipe clean with a clean towel, leaving no dust or residue; 2. Using professional brake caliper guide pin lubricant—wear a single-finger glove and apply the product evenly on the surface of the brake caliper guide pins and inside the guide pin grooves, avoiding mixing with other mineral lubricating oils; 3. Using professional high-temperature resistant brake pad protectant—wear a single-finger glove and apply the product evenly on the back of the brake pads and inside the sliding grooves at both ends of the pads; 4. Using professional high-temperature anti-seize lubricant—wear a single-finger glove and apply the product evenly on each tire bolt and the metal contact surfaces between the wheel rim and hub.
10
1
Share

Are Audi OEM Wheels Forged or Cast?

Audi OEM wheels are cast, and generally, OEM wheels are cast. Here is some information about cars: 1. Wheel Hub: The wheel hub is the metal component inside the tire that connects the wheel rim to the rotating part of the wheel core, i.e., the central part that supports the tire and is mounted on the axle. It is also called the wheel rim, steel ring, or tire ring. Wheel hubs come in various types based on diameter, width, forming method, and material. 2. Types of Wheel Hubs: Wheel hubs are also called wheel rims. Depending on the characteristics and requirements of different vehicle models, the surface treatment process of wheel hubs can vary, mainly divided into painting and plating. For ordinary vehicle models, less consideration is given to the appearance of the wheel hubs, with good heat dissipation being a basic requirement. The process typically involves painting, i.e., spraying followed by baking, which is cost-effective, provides bright colors, and ensures long-lasting durability. Even when the vehicle is scrapped, the color of the wheel hubs remains unchanged.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.