Where is the oil filter located on the 2018 AX7?

[OLeah]

The oil filter on the 2018 AX7 is located near the engine, possibly on either side or underneath. The oil filter, also known as the oil purifier, functions to remove impurities, gums, and moisture from the engine oil, delivering clean oil to all lubrication points. The 2018 AX7, developed and manufactured by Dongfeng Fengshen, is a self-owned brand SUV model with body dimensions of 4696mm in length, 1850mm in width, and 1712mm in height. The 2018 AX7 features the Interactive Geometry 2.0 design concept, incorporating a new track emblem, luxurious matrix full-LED headlights, an IHBC intelligent high-beam control system, Wind Wing independent LED daytime running lights, a full-LED continuous family-style taillight strip, 19-inch aero rims paired with Pirelli tires, enabling it to handle various complex road conditions with ease.

[DiLuke]

I've driven the 2018 Dongfeng Fengshen AX7 several times, and the oil filter is located at the front lower part of the engine compartment, near the oil pan. Usually, after squatting down or raising the vehicle, you can see a round metal cylinder slightly to the left in the center of the chassis—that's the oil filter. It's recommended to wait until the engine cools down before replacing it to avoid burns. After securely supporting the vehicle with a jack, use a dedicated filter wrench to loosen the old oil filter by turning it counterclockwise, and remember to place an oil drain pan underneath to prevent leaks. Before installing the new filter, apply a bit of oil to the sealing ring for better sealing. The location is quite user-friendly, making DIY replacement convenient. I typically check it every 8,000 kilometers. Remember not to overtighten it, as that can make removal difficult next time, and be careful not to let tools touch other components—simplicity and safety are key.

[DiFaith]

During my long-term driving of the 2018 AX7, I noticed the oil filter is mounted on a bracket beneath the engine, specifically in the chassis area ahead of the driver's position, clearly visible when peering under the vehicle. Replacing the filter isn't overly challenging, but don't underestimate engine temperature – I always wait 30 minutes for cooling before starting. Have wrenches and gloves ready; after removing the old filter, tighten the new one firmly but avoid excessive force. Its accessible location offers multiple advantages, saving both time and money on maintenance. I've learned this the hard way after experiencing engine damage from oil leakage due to a faulty filter. A reminder: while the position follows standard points, slight variations exist depending on engine models. It's best to consult the manual or observe a professional demonstration at a repair shop for guaranteed accuracy.

[DeJustin]

When I first got my 2018 AX7, it took me some time to locate the oil filter—it's actually positioned in the middle section underneath the chassis, near the oil pan. You can clearly see the circular component by either crawling under the car or slightly lifting the front end. The location is fixed and not complicated, and replacing the core only requires basic tools: use a wrench to loosen it, avoiding operation when the engine is hot. After my first replacement, I learned that applying oil to the new filter helps prevent leaks. Remember to check it every 5,000 kilometers. The easily identifiable location makes maintenance efficient, helping to keep the engine clean and extend its lifespan.

[GageLee]

The oil filter of the 2018 AX7 is located in the central area at the bottom of the engine, near the oil pump. It is designed as a round metal component and requires lifting the vehicle or accessing from underneath for direct observation. The operation steps are simple: park the vehicle securely, remove the screw, replace the filter element, and reset. Its location facilitates maintenance, and it should be replaced every time the oil is changed. Ensure to use a matching filter model to avoid oil passage blockage.

[GabrielLee]

The oil filter of the 2018 Dongfeng Fengshen AX7 is designed under the front axle of the engine, with an easily accessible location primarily for hassle-free DIY by car owners. The replacement process is straightforward: lift the front of the car, reach out to touch it, unscrew the bolt, and install a new one. This layout reduces maintenance time costs, and I have personally replaced it several times without any trouble. Regularly check for oil stains or unusual noises; if there are signs of oil leakage near the location, inspect it promptly to ensure the engine runs healthily. The reasonable positioning is one of the highlights of this car, and it is recommended to check the filter status every 7,000 kilometers.