What items are required for the second maintenance of a new car?

1 Answers
LillianaAnn
07/29/25 7:45pm
The items required for the second maintenance of a new car include: Engine oil and oil filter: If using mineral oil, semi-synthetic oil, or full synthetic technology oil, the maintenance interval is generally 5,000 kilometers or six months. If using full synthetic oil, the maintenance interval is 10,000 kilometers or one year. Replace the engine oil and oil filter, check the cleanliness of the air filter and cabin air filter, and then decide whether to blow them clean or replace them directly based on the actual condition. Air filter: At every 20,000 kilometers, generally replace the air filter, cabin air filter, brake fluid, coolant, spark plugs, and other components. Additionally, rotate the four tires based on their wear condition. Various fluids: At every 40,000 kilometers, it is necessary to replace all types of vehicle fluids, replace the timing belt/chain, clean the throttle body, fuel injectors, and other components, and check the condition of wear items such as brake pads and tires for replacement as needed.
Was this review help?
15
4
Share
More Forum Discussions

How to Quickly Memorize Nighttime Light Simulation?

For oncoming vehicles, following vehicles, and straight driving, remember to turn on the low beams; for turns, adding new items, turning on the low beams is fine; when hearing 'pass' or 'overtake', alternate between high and low beams; only when the lighting is poor should the high beams be turned on; if the vehicle encounters a malfunction or temporary stop, turn on both the width markers and warning lights; if all lights are the same, stop the operation and listen to the voice prompts; when the exam ends with a voice prompt, turn off all lights. Here is an introduction to Subject Three: Introduction: Subject Three is part of the motor vehicle driver's license assessment, referred to as the road driving skills and safe civilized driving knowledge test. Content: The road driving skills test generally includes: preparation before getting in the car, light simulation test, starting, straight-line driving, gear shifting operations, changing lanes, pulling over to park, driving straight through intersections, turning at intersections, meeting vehicles, overtaking, making U-turns, nighttime driving, etc. 3. Assistance: Students can use the simulated test software on the mobile or computer version of the Driving Test Guide to learn traffic regulations.
20
2
Share

How Many Seats Can a B2 License Drive?

B2 driver's license can only drive vehicles with 9 seats or less, and blue-plate minibuses with a length of less than 6 meters. The vehicle types permitted by a B2 license include heavy and medium-duty trucks, mostly trucks, such as dump trucks. It also includes large, heavy, and medium-sized special operation vehicles, which refer to vehicles equipped with special equipment or devices, such as sprinkler trucks, concrete mixer trucks, fire trucks, etc. Relevant information about the driver's license is as follows: Introduction: The People's Republic of China Motor Vehicle Driver's License, referred to as the driver's license, is a license that must be applied for by motor vehicle drivers in accordance with the laws of the People's Republic of China. Examination Content: The examination subjects include three items: traffic regulations and related knowledge, field driving, and road driving (including safe and civilized driving).
2
5
Share

Can I transfer the ownership of a used car purchased from another region?

Used cars can be transferred across regions. The specific process for transferring ownership of a used car from another region involves first obtaining the relevant information about the purchased vehicle, then completing the transaction at the local used car market in the vehicle's original location, where a nationally unified used car transaction invoice will be issued. After purchasing the vehicle, you need to apply for a file transfer at the local vehicle management office where the vehicle is registered. Relevant information about vehicle ownership transfer is as follows: Introduction: Vehicle ownership transfer refers to changing the name of the vehicle's owner. When buying a used car, besides checking the vehicle's condition, the most important step is completing the ownership transfer procedures. Principle: Every vehicle has a fixed registration, which primarily records the owner's name and address, along with other relevant vehicle parameters. Transferring ownership of a vehicle proves that the car belongs to the new owner and has no accident or violation records. If the vehicle has issues such as being involved in an accident, failing annual inspections, being stolen, or being smuggled, the ownership cannot be transferred through normal procedures.
18
5
Share

What to Do When Encountering Traffic Jams While Driving?

First and foremost, maintain a reasonable distance from the vehicle in front—neither too close nor too far. Ideally, keep a gap equivalent to one or two body lengths. Traffic jams are often prolonged processes with frequent stops and starts. Being too close to the vehicle ahead increases the risk of scratches or rear-end collisions during acceleration, which would only worsen the already difficult traffic conditions. Conversely, leaving too much space may invite aggressive drivers from adjacent lanes to cut in, further contributing to congestion. When starting off, always leave some room to react based on the road conditions ahead. Therefore, during stop-and-go traffic, it's best to maintain a distance of three to four car lengths from the vehicle in front. This ensures that drivers from neighboring lanes won't cut in while also providing enough space for you to accelerate smoothly. In congested areas, maintain a steady speed and be prepared to brake at any moment. However, avoid keeping your right foot on the brake pedal for extended periods or pressing it too frequently. Additionally, when braking, use the ball of your foot to apply gentle pressure—this method is quicker and more effective than braking with just the toes.
18
2
Share

What is the meaning of the slow down sign?

The meaning of the slow down sign is to indicate that vehicles should slow down and yield, informing drivers that they must slow down or stop, observe the traffic conditions on the main road, and only proceed when it is deemed safe, ensuring priority for vehicles on the main road. The slow down sign is mainly used in areas with heavy pedestrian traffic, corners, or sections with poor road conditions. Relevant information about traffic signs is as follows: Introduction: Traffic signs are road facilities that convey guidance, restrictions, warnings, or instructions through text or symbols. They are also known as road signs or traffic road signs. Importance: In traffic signs, safety is generally the priority. Setting up eye-catching, clear, and bright traffic signs is an important measure for implementing traffic management and ensuring road traffic safety and smoothness.
16
3
Share

Why is it difficult to shift gears when the car is hot?

Difficulty in shifting gears when the car is hot may be due to wear and tear of the shift lever, reduced performance of the clutch pressure plate leading to incomplete separation, severe wear of the synchronizer, or decreased working performance of the clutch fluid due to temperature effects. There could also be other reasons, so it is recommended to check for issues such as the reduced performance of the pressure plate or the clutch fluid's performance being affected by temperature. Relevant information about automatic transmissions is as follows: Introduction: An automatic transmission, as the name suggests, does not require the driver to manually shift gears. The vehicle automatically selects the appropriate gear based on the driving speed and traffic conditions. Generally, automatic transmission cars have six gear positions, arranged from top to bottom as: P, R, N, D, S, L. Automatic Principle: The engine's power is transmitted through the gearbox, which is also a key factor affecting fuel consumption. Generally, automatic transmissions consume 10% more fuel than manual transmissions. Whether manual or automatic, the more gears a transmission has, the more fuel-efficient it is.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.