···
Log in / Register

What items are needed for a major car maintenance?

6Answers
Rich
07/29/2025, 04:04:15 PM

Major car maintenance includes the following items: 1. Engine oil: Changing the engine oil at 40,000 kilometers is the primary task. Engine oils include mineral oil, semi-synthetic oil, and fully synthetic oil, with quality increasing in that order. 2. Transmission fluid: Most car maintenance manuals recommend changing the transmission fluid every 2 years or 40,000 kilometers. The transmission connects the clutch and the drive shaft, and its internal gears are very precise. Frequent gear shifting can cause the transmission fluid to deteriorate. 3. Coolant: The replacement interval for car coolant is generally 2 years, and it usually comes in two colors: pink and blue. 4. Brake fluid: It is recommended to replace the brake fluid during the 40,000-kilometer major inspection, as brake fluid is prone to overheating, deterioration, and forming bubbles, which can reduce braking effectiveness. 5. Brake pads: Some domestic car maintenance manuals suggest replacing brake pads every 40,000 to 60,000 kilometers, as brake pads directly affect the braking safety of the car. 6. Power steering fluid: Power steering fluid is typically recommended to be replaced every 3 years or 60,000 kilometers, mainly to assist the car's steering system. 7. Filters: During routine maintenance, air filters and cabin air filters are cleaned with high-pressure air to remove dust, but they should be replaced during the 40,000-kilometer major maintenance.

Was this review help?
119
Share
McTucker
08/14/2025, 12:07:21 PM

I just had a major service on my car last week, and it feels much better now. A major service is usually done every 20,000 kilometers or so, and it includes quite a few items. Changing the engine oil and oil filter is the basics, which helps the engine run more smoothly and prevents excessive wear. Replacing the air filter is crucial, especially in dusty urban areas, as a dirty filter can affect air intake. A thorough inspection of the brake system is a must, including changing the brake fluid, otherwise, poor braking response could lead to accidents. Tire rotation and balancing are essential to ensure even wear and extend tire life. Replacing the spark plugs improves ignition efficiency and can even save some fuel. Coolant replacement prevents overheating and rust, extending the engine's lifespan. Changing the transmission fluid makes gear shifts smoother, especially in automatic cars. Testing the battery is important to avoid getting stranded on the road. It's also a good idea to check the chassis components, such as the suspension and shock absorbers, to ensure safety. After a major service, driving feels more secure, and it helps reduce unexpected repair costs.

Was this review help?
17
Share
Expand All
HarmonyAnn
10/15/2025, 10:16:46 PM

Major car maintenance covers key service points. This includes oil and oil filter replacement to ensure engine lubrication and cleanliness. The air filter should also be renewed to prevent contaminants from damaging components. Brake system inspection is crucial, with brake fluid replacement enhancing braking responsiveness. New coolant helps the cooling system operate efficiently, preventing overheating issues. Spark plug replacement optimizes ignition performance, maintaining power output. Transmission fluid renewal ensures smooth gear shifting and reduces wear. Tire rotation and balancing promote even tread wear, extending service life. Battery and charging system testing prevents power supply problems. Additionally, belts, hoses, and other wear-prone parts should be inspected to detect potential issues early. This comprehensive maintenance prevents major failures, saves future costs, and enhances driving safety.

Was this review help?
14
Share
Expand All
LaMorgan
11/28/2025, 10:04:25 PM

When performing a major car maintenance, safety should be the top priority. Focus on inspecting the braking system and replacing the brake fluid to ensure reliable braking and prevent accidents. Check tire pressure and wear levels to avoid the risk of blowouts. Maintain suspension and steering components to keep handling stable. Inspect all lights, including headlights and fog lights, to ensure clear visibility at night. Additionally, replace the engine oil and oil filter to protect the engine's lifespan. Change the air filter to prevent dust damage. Regularly performing these tasks can significantly reduce the likelihood of accidents, making every drive safer. Flushing the cooling system prevents rust and leaks, increasing reliability. Don’t underestimate these details—they can be lifesavers in critical moments.

Was this review help?
7
Share
Expand All
VonKate
01/18/2026, 11:26:07 PM

From an economic perspective, discussing major maintenance. Changing engine oil and the oil filter is a necessary investment, as it can improve fuel efficiency and save money. Replacing the air filter enhances engine performance and saves fuel. Tire rotation and balancing extend tire life and reduce expenses on new tires. Brake fluid replacement prevents costly brake system overhauls. Spark plug renewal maintains power output and lowers long-term fuel costs. Battery checks avoid roadside assistance expenses. Coolant and transmission fluid changes prevent major repairs. Although regular maintenance incurs costs, it improves vehicle reliability and saves overall expenses, making proper budget planning crucial.

Was this review help?
17
Share
Expand All
DeBenjamin
04/15/2026, 12:42:03 AM

Major maintenance focuses on preventive upkeep to extend vehicle lifespan. Perform every 20,000 km: Replace engine oil and filter to keep engine clean and smooth. Change air and fuel filters to optimize intake and combustion efficiency. Renew spark plugs to enhance ignition performance and power. Replace transmission fluid to ensure smooth gear shifts with fewer issues. Cooling system flush prevents rust/leaks and prolongs cooling components. Brake fluid service improves safety. Tire rotation balances even wear. Inspect belts/hoses to prevent breakage failures. These steps prolong vehicle life, reduce breakdowns for greater comfort, and preserve resale value.

Was this review help?
8
Share
Expand All
More Q&A

Where is the Ghost Motorcycle Produced?

The Ghost Motorcycle is manufactured in Taizhou, Zhejiang. Motorcycle Maintenance: Regularly clean the motorcycle chain or pulley, change the engine oil periodically, apply lubricant to exposed bolts and nuts, remove carbon deposits from the spark plug, and check the clutch for wear. Inspect whether the shock absorber can currently connect to the engine, if the position of the shock absorber has changed, and replace the shock absorber oil. Advantages of Motorcycles: Affordable price, suitable for the general public's economic conditions, low maintenance costs, good exterior configuration with a sense of fashion, high cost-performance ratio, strong playability, and a relaxed environment.
101
Share

How often should a new Mondeo be serviced?

A new Mondeo should undergo routine maintenance every 5,000 kilometers or every six months, which typically includes changing the engine oil, oil filter, and air filter. Engine oil serves four main functions: cooling, lubrication, cleaning, and sealing, all of which are crucial for ensuring the proper operation of the engine. Its primary roles are lubrication, cleaning, and heat dissipation. After prolonged driving, the oil filter and fuel filter accumulate a significant amount of impurities, leading to incomplete fuel combustion, reduced fuel efficiency, and increased fuel consumption. Therefore, regular replacement is recommended. The air filter also collects dust and bacteria, and if not replaced, the contaminated air circulating inside the vehicle can negatively affect human health.
114
Share

What are the reasons why Mercedes-Benz Carlife cannot be enabled?

Mercedes-Benz Carlife cannot be enabled due to Bluetooth connection failure or issues with the connecting data cable. Bluetooth connection failure: Delete the paired Bluetooth, turn off Bluetooth and turn it back on, search for the Bluetooth address of Mercedes-Benz Carlife and reconnect. This should enable Mercedes-Benz Carlife to start successfully. Issues with the connecting data cable: When using Mercedes-Benz Carlife to connect to your phone, try to use the original data cable to avoid data transmission errors. Features of Mercedes-Benz Carlife: Voice input for map navigation with intelligent voice announcements; play local music, listen to online music or radio, support for third-party service access; make calls, answer incoming calls, and synchronize access to phone contacts and call history.
104
Share

What does BMW xDrive mean?

BMW xDrive refers to the all-wheel drive system. The xDrive system continuously adjusts torque distribution based on road conditions, delivering the required torque to the front and rear wheels. In the default state, the torque distribution ratio between the front and rear wheels is 40:60, with the maximum distribution range being from 0:100 to 100:0. The BMW xDrive intelligent all-wheel drive system can be found in some sedans and SUVs under the BMW brand. BMW's four-wheel drive system can enhance the vehicle's cornering speed and improve driving stability. The xDrive system features a transfer case at the end of the transmission, which includes a driveshaft that transmits power to the two wheels on the front axle.
118
Share

Should You Use Low Beam or High Beam When Driving at Night?

When driving at night, use high beam or low beam headlights according to road safety laws. Regulations for night driving: When driving at night on roads without street lights, under poor lighting conditions, or in low visibility situations such as fog, rain, snow, dust, or hail, you should turn on the headlights, position lights, and rear lights. However, when following another vehicle closely in the same direction, you must not use high beams. When passing sharp curves, slopes, arched bridges, pedestrian crossings, or intersections without traffic lights at night, you should alternately switch between high and low beams as a signal. Precautions for night driving: Increase following distance, strictly control vehicle speed, and slow down when meeting other vehicles at night.
117
Share

Where is the cabin air filter located in the BMW 525?

The cabin air filter in the BMW 525 is located behind the cover panel in the footwell area on the passenger side. The function of the cabin air filter is to purify air entering the vehicle cabin from outside, improving air cleanliness. The BMW 525 measures 5047mm in length, 1860mm in width, and 1491mm in height, with a wheelbase of 3108mm, featuring rear-wheel drive configuration. It employs a double-wishbone independent front suspension and a multi-link independent rear suspension. The BMW 525 is a mid-to-large sedan produced by BMW Brilliance, equipped with a 2.0T 184hp L4 engine paired with an 8-speed automatic transmission. The engine delivers maximum power of 135kW and peak torque of 290Nm.
116
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.