What items are included in the second car maintenance?

1 Answers
JasperDella
07/25/25 6:59am
The second car maintenance includes the following items: 1. Replace the three filters and engine oil; 2. Check whether the brake fluid, transmission oil, and power steering fluid need replacement; 3. Inspect the brake pads, tires, shock absorbers, and suspension; 4. Check the spark plugs, throttle valve, and fuel supply system; 5. Rotate the front and rear wheels and perform routine checks (lights, battery, etc.). After replacing the engine oil and oil filter during the second maintenance, it is important to reset the vehicle's maintenance reminder to prevent it from lighting up after driving for a while. Check the vehicle's tire pressure and inflate if necessary. The air filter and cabin air filter should not be dirty; clean them with compressed air. Inspect the vehicle's chassis for any scratches from daily driving and check for oil or water leaks, addressing any issues promptly. Check the levels of coolant, brake fluid, and power steering fluid to ensure they are between the high and low marks, and top up if they are below the minimum level.
Was this review help?
12
3
Share
More Forum Discussions

How to turn off the LINGDONG radio?

The LINGDONG radio can be turned off in the following two ways: 1. Open the radio on the central control screen, then press the pause button of the radio. 2. The black button below the air vent is the mute button, which can directly mute the radio. Here are more details about the LINGDONG: 1. The Hyundai LINGDONG has a body size of 4610mm in length, 1800mm in width, and 1450mm in height, with a wheelbase of 2700mm. It is equipped with Nexen tires, with front and rear tire specifications of 225/45R17, and comes with cyclone-style rims. 2. The LINGDONG is equipped with four safety features including rear parking radar, front side airbags, and tire pressure warning, as well as five comfort and convenience features such as hill start assist, electric sunroof, and engine start-stop technology.
3
5
Share

How to clear the maintenance reminder for the 2020 Emgrand?

Method to clear the maintenance reminder for the 2020 Emgrand: After starting the vehicle's engine, press the SET button, then press the MODE button, and finally press the cancel button on the left side of the steering wheel. The following are precautions for car maintenance: 1. Avoid directly wiping the paint surface with a duster or dry cloth. Rinse off dust and dirt from the car's surface with water, then wipe it clean with a dry absorbent cloth. Do not let it air dry after rinsing. 2. When parking, try to avoid prolonged exposure to sunlight, especially for white and non-metallic paint. 3. Reduce the frequency of car washing and avoid waxing and polishing the vehicle. 4. Be aware of corrosive substances like bird droppings and remove them promptly.
18
0
Share

Where is the cabin air filter located in the 2004 Honda Fit?

The cabin air filter in the 2004 Honda Fit is located inside the blower behind the glove compartment on the passenger side. If you notice musty or other unpleasant odors when using the air conditioning, or if dust and debris are being blown out, it indicates that the cabin air filter is dirty and needs replacement. The 2004 Honda Fit is a compact 5-door, 5-seat hatchback with the following dimensions: length 3845mm, width 1675mm, height 1535mm, and a wheelbase of 2450mm. It is equipped with a 1.3L naturally aspirated engine and a 5-speed manual transmission, delivering maximum power of 60 kW and maximum torque of 116 Nm. The vehicle features front-wheel drive, with MacPherson strut independent suspension at the front and a torsion beam non-independent suspension at the rear.
17
0
Share

How to Deal with Oxidized Vehicle Trim Strips?

Vehicle trim strips can be treated for oxidation by: 1. Using a polishing compound to rub the oxidized area and remove the oxidation layer; 2. Replacing the oxidized trim strips. Trim strips are accessories installed around the edges of car windows, featuring a chrome-plated appearance and made of stainless steel, ensuring they do not fade or rust over long-term use. Precautions when installing trim strips include: 1. Peel off the adhesive protective film for installation, avoiding contact between fingers and the adhesive surface when removing the film; 2. When installing decorative trim strips, press firmly for 5 to 10 minutes without releasing pressure, as this may affect the adhesion; 3. Before installation, place the strip in the intended position to adjust and confirm the correct placement.
1
1
Share

Does Installing and Removing a Grille Affect Depreciation?

Installing and removing a grille affects depreciation, and replacing a bumper will lead to a decrease in the car's resale value. The higher the original value of the vehicle, the greater the impact such details like bumper replacement have on the overall depreciation rate. Vehicle Depreciation: Vehicle depreciation loss refers to the reduction in the actual value of a vehicle after it has been repaired following a traffic accident. Although the performance may be restored, the vehicle's lifespan, safety, and handling characteristics often cannot be fully returned to their pre-accident state, inevitably leading to a loss in value—essentially, the loss caused by the accident reducing the vehicle's worth. Depreciation Scenarios: Minor frictions on the vehicle do not result in depreciation costs. However, in more severe traffic accidents, even after repairs, the damaged vehicle is unlikely to fully regain its pre-accident performance, and its safety is correspondingly reduced.
14
4
Share

What Causes Motorcycle Handlebar Wobble?

When a motorcycle is moving at low speeds, the main causes of handlebar wobble are as follows: Excessive clearance in the steering stem bearings: With prolonged use of the motorcycle, the bearing nuts on the handlebar may loosen, and the upper and lower bearing races and ball bearings can become severely worn. If the clearance is not adjusted in time, this will inevitably cause the handlebar to wobble back and forth during riding. Maintenance tips: Adjust the steering stem bearing nuts on the motorcycle handlebar to eliminate the clearance. If the bearing nuts are already tightened to the maximum but the clearance persists, disassemble and inspect the ball bearings and upper/lower bearing races for damage. If they are damaged, replace them with new ball bearings or upper/lower bearing races.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.