What is the width of the Volkswagen Lavida?

1 Answers
CarolineLee
07/30/25 6:55am
The body dimensions of the Volkswagen Lavida are: length: 4605mm, width: 1765mm, height: 1460mm, wheelbase: 2610mm. Below is a detailed introduction to the Lavida: 1. The SAIC Volkswagen all-new Lavida is the first car to adopt Volkswagen's latest design. The iconic horizontal grille has evolved further, integrating better with the headlights, resulting in a groundbreaking change to the overall shape. 2. The Volkswagen Lavida is equipped with the currently popular LED headlights for new cars. Models with LED headlights that also feature lenses are rare in this segment, even some luxury brands do not come with LED headlights with lenses. The attention to detail is excellent this time. 3. With the extended wheelbase, the C-pillar of the new car has been moved backward, and the roofline is more streamlined. The coupe-like design makes the side profile more dynamic. The dual waistline design connects the headlights to the taillights, making the body proportions more elongated. In terms of body dimensions, the new car measures 4670/1806/1474mm in length/width/height, with a wheelbase of 2688mm. The recessed rear design enhances the sense of layering. The 'ducktail' design with an upturned edge on the trunk lid is a popular design element nowadays. The slender taillights give the rear a more visually striking effect. The lower surround chrome-plated faux exhaust adopts a symmetrical design, simple and elegant.
Was this review help?
17
1
Share
More Forum Discussions

How to Replace the Fuel Tank Cap on a Tiguan?

Tiguan fuel tank cap replacement method: 1. Soak the plastic shell part of the fuel tank cap in boiling water for a while, then use a flat-head screwdriver to pry it open along the junction between the plastic shell and the metal part (it's easier to pry after soaking in boiling water). 2. After prying open the plastic shell, pull out the lock core and plastic lock core slot from the metal shell (the lock core and lock core slot are still together at this point and not separated). 3. Insert the key into the lock core, then at the bottom of the lock core slot, there is a wire clip. After pulling out the clip, the lock core can be removed. If the key is not inserted, the lock core will scatter when removed, making reassembly more troublesome. 4. Install the new fuel tank cap, following the reverse order for installation.
7
1
Share

Where is the air conditioning filter of Volkswagen Bora located?

The air conditioning filter of Volkswagen Bora is located inside the glove compartment on the passenger side. The following are the specific functions of the car air conditioning filter: 1. It ensures that the filter fits tightly against the housing, preventing unfiltered air from entering the cabin. 2. It separates solid impurities such as dust, pollen, and grinding particles from the air. 3. It adsorbs moisture, soot, ozone, odors, carbon oxides, SO2, CO2, etc., from the air, with strong and long-lasting moisture adsorption. 4. It prevents the car windows from fogging up, ensuring clear visibility for the driver and passengers, provides fresh air to the cabin, prevents the inhalation of harmful gases, ensures driving safety, and effectively sterilizes and deodorizes.
5
4
Share

What transmission does the Tiguan use?

Volkswagen Tiguan is equipped with a 6-speed dual-clutch transmission, as well as a 6-speed automatic transmission (AT). AT transmissions and dual-clutch transmissions are very common types of transmissions. The AT transmission is also known as a torque converter transmission, which connects to the engine via a torque converter and contains planetary gears internally. Below are some relevant details about the Tiguan: The Tiguan is a compact SUV under the Volkswagen brand. In terms of body dimensions, it measures 4506mm in length, 1809mm in width, and 1685mm in height, with a wheelbase of 2684mm. Power-wise, the Volkswagen Tiguan utilizes three different engines: a 1.4-liter turbocharged engine, a 1.8-liter turbocharged engine, and a 2.0-liter turbocharged engine.
15
0
Share

At what temperature does the Nissan Tiida's water temperature gauge light up red?

Tiida's water temperature gauge: C represents 60 degrees, H represents 110 degrees. The red light will illuminate when the water temperature reaches 110 degrees. When starting the engine, the water temperature gauge should indicate no less than 50°C; during normal driving, the normal reading of the water temperature gauge should be between 70°C and 90°C. The following are the hazards of excessively high water temperature to the engine: 1. The expansion of engine components will reduce the clearance between parts, intensifying engine wear; 2. It will reduce the viscosity of engine oil, leading to increased wear of components and reduced engine lifespan; 3. Damage to the cylinder gasket may cause cross-flow between water channels, oil channels, and air passages on the gasket, allowing oil to enter the radiator and water to enter the engine oil.
13
0
Share

Does Windshield Polishing Have Any Impact?

Windshield polishing has no negative impact. After polishing the car's front windshield, it smooths out some of the fine pores on the glass, leaving no marks on the surface while improving the glass's clarity, providing the driver with a clear view. Windshield polishing can protect the front windshield and extend its service life. The specific steps for polishing are: 1. Clean the glass and the surface of the glass polishing sandpaper, ensuring there are no dust, sand, or other particles attached; 2. Before polishing, use a marker to outline the area to be polished on the back of the glass to avoid shifting and causing an overly large polishing area; 3. Use P120, P240, P400, and P600 grit glass sandpaper to remove scratches from the glass; 4. Wipe the glass clean to observe the sanded area, apply polishing solution, and use a polishing wheel or pad to polish, being careful not to move too quickly.
14
3
Share

Is the OBD Fault Light Serious?

obd fault light indicates excessive exhaust emissions but does not affect engine power. The OBD system continuously monitors whether the vehicle's exhaust exceeds standards during engine operation and issues an immediate warning if levels are exceeded. When a system malfunction occurs, the fault light or check engine warning light illuminates, while the powertrain control module stores the fault information in memory. The trouble code can be read from the PCM through specific procedures. Based on the trouble code prompts, maintenance personnel can quickly and accurately determine the nature and location of the fault. More details are as follows: 1. Repair OBD system faults promptly. Annual vehicle inspections have limited effectiveness in controlling automotive emissions. However, with OBD installed, the situation is completely different as it allows continuous monitoring of the vehicle's emission levels. 2. If emissions fail to meet standards, the OBD will issue a warning to promptly notify the driver to seek repairs. The most critical aspect of Euro III standards is the use of OBD.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.