What is the wheelbase of the CT4?

How to cancel the wrench light on Hanteng X5?

The method to cancel the wrench light on Hanteng X5: Insert the key into the ignition switch, press and hold the small black stick on the instrument panel, power on the car, and then release the small stick on the instrument panel. The Hanteng X5 is a model under Hanteng Motors, with dimensions of 4501mm in length, 1820mm in width, and 1648mm in height, and a wheelbase of 2600mm. In terms of interior, the car features a warm dual-tone interior design with wood grain trim panels, and a 9-inch central control screen equipped with the Hanteng Cloud Intelligent Networking Service System, providing functions such as remote diagnosis, remote control, and navigation. In terms of configuration, the car is equipped with one-button start-stop, EPB electronic handbrake, automatic parking, panoramic sunroof, etc.

15

3

Share

What does Mercedes-Benz HOLD mean?

Mercedes-Benz HOLD is an anti-rollback function. Below are relevant introductions about the HOLD function: 1. Mercedes-Benz HOLD function technique: When encountering a red light ahead and the vehicle comes to a complete stop, simply press the brake pedal quickly and firmly to activate the HOLD function. Then, you can release both feet and hands, and the vehicle will not move. To deactivate the HOLD function and continue driving, simply press the brake pedal firmly again or lightly tap the accelerator. 2. Prerequisites for activating the HOLD function: The vehicle is stationary, the engine is running or has been automatically shut off by ECO (start/stop function), the electric parking brake is released, and the transmission is in D, N, or R gear.

20

0

Share

What to Do If the License Plate Screw Hole Is Damaged?

If the license plate screw hole is damaged, you can go to the vehicle management office to replace it or use rivets to re-secure the license plate. Alternatively, you can remove it, weld a bolt, apply anti-rust coating, or offset the screw hole position and drill a new hole in the license plate. If you need to replace the screws, simply go to the vehicle management office to apply for them. However, it's important to note that screws in each province or city have special markings, so be careful not to install them incorrectly. License plates, commonly referred to as vehicle tags, are the numbering and information registration for each vehicle, displaying the registration number, registration area, or other relevant details. Their primary function is to identify the vehicle's region of registration and allow authorities to trace the vehicle's owner and registration information based on the plate.

5

Share

Does Cruise Control Affect the Car?

Cruise control does not affect the car. Here are some precautions for using cruise control: 1. Pay attention to road conditions: Do not use the speed control system when driving on roads with heavy traffic or poor road surfaces (such as slippery roads, loose gravel roads, or roads after heavy rain); 2. Avoid pressing the clutch: After the system is activated and the speed exceeds 40 km/h, do not press the clutch pedal or shift the gear lever into neutral, as this may cause the engine to over-rev and lead to damage. 3. Check for faults: When using the cruise control system, observe whether the "CRUISE" indicator light on the dashboard is flashing. If it is flashing, it indicates that the cruise control system is in a fault state.

18

1

Share

What does the 652t in the Envision mean?

The 652t in the Envision refers to the tail badge of the new Regal model, indicating that it is equipped with the new 2.0t engine. Many models under the Buick brand have been upgraded with the new 2.0-liter turbocharged engine from the General Motors group, including the LaCrosse, Regal, and GL8. The engine code for this model is LSY. Here are some additional details: 1. Introduction: The LSY engine is a 2.0-liter turbocharged four-cylinder engine. The LSY engine used in the LaCrosse produces 237 horsepower and a maximum torque of 350 Nm. The engine's maximum power is achieved at 5000 rpm, and the maximum torque is available between 1500 and 4000 rpm. 2. Transmission: This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block.

8

2

Share

What are the main reasons for diesel vehicles emitting black smoke?

The main reasons for diesel vehicles emitting black smoke are: 1. Uneven or excessive fuel supply from the high-pressure fuel pump to each cylinder, which can cause unstable engine speed and intermittent black smoke; 2. Poor quality diesel fuel that is difficult to ignite, leading to black smoke emissions, and also prone to carbon buildup in the combustion chamber and exhaust pipe muffler; 3. Overly rich air-fuel mixture resulting in incomplete combustion, which can be caused by various factors such as high fuel pressure, damaged fuel injectors leaking fuel, or poor ignition performance; 4. Severe wear of cylinder liners and piston components, which leads to poor piston ring sealing, a significant drop in cylinder pressure, resulting in incomplete combustion of diesel and black smoke emissions, along with a sharp decrease in engine power, and in severe cases, the engine may even stall automatically.

5

2

Share

What is the wheelbase of the CT4?

How to cancel the wrench light on Hanteng X5?

What does Mercedes-Benz HOLD mean?

What to Do If the License Plate Screw Hole Is Damaged?

Does Cruise Control Affect the Car?

What does the 652t in the Envision mean?

What are the main reasons for diesel vehicles emitting black smoke?

What Kind of Mortgaged Cars Are Considered Legitimate?

What are the reasons for the squeaking sound of windshield wipers on the glass?

What is the Difference Between Tire Pressure Monitoring and Tire Pressure Display?

How to Deal with a Mouse Entering the Engine?