What is the weight of the Civic?

2 Answers
DeDallas
07/25/25 7:05am
Honda Civic body weight ranges from 1245 to 1331 kilograms. Below are relevant details about the Civic: Appearance: The Dongfeng Honda all-new Civic adopts Honda's latest family design language. A wide chrome trim strip in the middle of the front connects with the headlights, and the edges of the headlight clusters integrate zigzag-shaped LED daytime running lights. The side profile features a coupe-like sloping roofline design, making it significantly more dynamic and stylish compared to the current model. The rear section incorporates newly designed dual C-shaped taillights that offer high recognition when illuminated at night, complemented by a slightly upturned spoiler that further accentuates its sporty character. Body Dimensions: The new vehicle measures 4649 mm in length, 1800 mm in width, and 1416 mm in height, with a wheelbase reaching 2700 mm.
Was this review help?
11
5
Share
OLeo
08/10/25 6:26pm
As a long-term Civic owner, my car weighs around 1,300 kg, depending on the configuration. Base models might be slightly lighter, while higher trims or sunroof-equipped versions tend to be heavier. The weight affects driving comfort—it provides stability when turning in the city but requires more space when parking, especially on underground garage ramps. My experience shows an average fuel consumption of about 7L/100km, which isn’t high thanks to Honda’s engine optimization, though frequent acceleration and braking can increase it. Regular maintenance should account for the impact of weight on tire wear; I recommend annual checks for tires and suspension to prevent premature aging of parts due to excess weight. On highways, the weight offers better stability, making it less prone to swaying in strong winds compared to lighter cars. Overall, the Civic’s weight is well-balanced, making it ideal for daily family use while balancing safety and efficiency.
Was this review help?
1
1
Share
Expand All
More Forum Discussions

Is Buick a Domestic Brand?

Buick is not a domestic brand. Here is detailed information about Buick. 1. Buick is a brand under the American General Motors Group. Most Buick vehicles seen in China are joint-venture models produced by SAIC-GM, while Buick vehicles from the U.S. General Motors are imported. Many Buick models have been localized in China, such as the LaCrosse, Regal, and Envision. 2. Buick was originally an independent automobile manufacturer. On May 19, 1903, David Dunbar Buick founded the Buick Motor Company in the U.S. with the help of the Briscoe brothers. In the latter half of 1904, a carriage manufacturer, William C. Durant, recognized the immense potential of Buick and decisively acquired the company. In 1908, he established General Motors and continued to use the Buick brand as the cornerstone for the new company, which then began to thrive and achieved the highest annual automobile production in the U.S. 3. Buick's founder, David Buick, began developing gasoline engines before 1899 and completed his second car by 1900. However, the Buick Motor Company was not officially established until 1903. The company was renowned for its technological advancements, pioneering innovations such as overhead valves, turn signals, tinted glass, and automatic transmissions.
5
1
Share

What is the clutch lifting method for starting?

Slowly lift the clutch pedal a little. When you feel the vehicle start to shake, gradually apply the throttle, then slowly release the clutch completely to complete the starting process. When starting a manual transmission car, do not release the clutch pedal too quickly, otherwise the car is prone to stalling.
12
5
Share

How to Install a Car Radar?

First, use measuring tools to determine the installation positions of the sensors and mark them. Install the provided special drill bit onto the electric drill, then drill holes at the marked positions from the previous step. The holes should match the size of the sensors. Connect the sensors to the wiring harness and install them into the corresponding drilled holes. Organize the sensor wiring harness and route it to the trunk. Connect the display, sensor wiring, etc., to the main unit, then use adhesive tape to securely hide the main unit on the inner side.
14
0
Share

How to Remove Car Film Adhesive?

Apply vinegar evenly on the adhesive with a cotton swab, then scrub back and forth with the cotton swab. Finally, wipe it off with a paper towel, and it will be as clean as new. When essential balm first comes into contact with the adhesive, there may be no obvious change. However, persistent scrubbing with a cotton swab will speed up the reaction, and eventually, the adhesive will be completely removed. Brush alcohol onto the adhesive on the glass, and you will see the adhesive slowly soften and dissolve. It can then be easily peeled off by hand.
8
0
Share

Differences between Trumpchi GS5 235T and 270T?

The differences between the 235T and 270T models mainly lie in two aspects: power and emission standards. Below is a detailed introduction to their specific differences: 1. Emission standards: All 235T models comply with the China V emission standard; all 270T models comply with the China VI emission standard. 2. Power: Both the 235T and 270T are equipped with a 1.5T inline 4-cylinder turbocharged engine, but the 235T model is the low-power version, while the 270T model is the high-power version. The 235T model has a maximum power of 112KW, maximum horsepower of 152PS, maximum torque of 235N·m, maximum power speed of 5000rpm, and maximum torque speed range of 1450~4250rpm. The 270T model has a maximum power of 124KW, maximum horsepower of 169PS, maximum torque of 265N·m, maximum power speed of 5000rpm, and maximum torque speed range of 1700~4000rpm. 3. Transmission: One variant of the 235T is equipped with a 6-speed manual transmission, while the rest of the models, like the 270T, are equipped with a 6-speed automatic transmission. 4. Fuel consumption: There will certainly be differences in fuel consumption. 5. Configuration: Overall, the 270T has more abundant configurations. The configurations vary significantly among different models.
13
2
Share

What is the car starting procedure?

After getting into the car, adjust the seat to a comfortable position and fasten the seat belt. Start the car, then press the clutch pedal with your left foot and shift into first gear. Turn on the left turn signal and honk the horn. Press the accelerator pedal with your right foot, slowly release the clutch pedal with your left foot, steady the steering wheel with your left hand, and hold the front end of the handbrake with your right hand. When you hear the engine sound increase, quickly release the handbrake.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.