What is the weight of the BMW 125i?

What is the difference between 1.5 and 1.5T car engines?

Automobile engine 1.5 and 1.5T difference is as follows: 1. 1.5L refers to a 1.5 naturally aspirated engine. While 1.5T means a turbocharger is added on the basis of a 1.5 naturally aspirated engine, that is, 1.5T is a turbocharged engine. 2. 1.5L indicates that the car is equipped with a 1.5L displacement naturally aspirated engine. While 1.5T indicates that the car is equipped with a 1.5L displacement turbocharged engine. The specific differences between 1.5 and 1.5T are as follows: 1. Power: In terms of power, 1.5T is better than 1.5L. Under the same displacement, the one with "T" is often much more powerful than the one with "L". Just like the domestic independent car, which is also the best-selling SUV in China—the Haval H6, if you choose the one with "T", 1.5T can meet daily use. If you choose the one with "L", the minimum is 2.4L. 2. Fuel consumption: Generally, the fuel consumption of 1.5L models is lower than that of 1.5T models. Because the car with "L" will inhale air while sucking oil, so the fuel consumption of the one with "L" is lower. 3. Reliability: The engine with "L" has been used for a long time, so the technology is more mature and the reliability is higher. On the other hand, the engine with "T" has a shorter service life, the technology is not very mature, and the temperature of the turbocharged engine during operation is much higher than that of the naturally aspirated engine, so the service life will be shorter. 4. Maintenance cost: The reliability of the 1.5L engine is relatively high, and the failure rate during use is relatively low, so the daily maintenance cost is quite low. On the other hand, for the 1.5T engine, when the car's mileage reaches 150,000 kilometers, the turbocharger may need to be replaced, and the maintenance cost of the engine with "T" is more, and the maintenance cost is much higher.

8

5

Share

What is the yellow dotted line at an intersection?

Crossroad yellow dotted lines are intersection guide lines. Relevant introductions are as follows: Function: They are auxiliary lines assisting vehicle turns - white dotted lines serve as left-turn auxiliary lines while yellow ones are for right turns. Such guide lines are generally installed at high-traffic or large intersections to clarify driving directions and alleviate traffic pressure. Notes: Left turns should keep to the left of white dotted lines, while right turns should stay to the right of yellow dotted lines. The white-left/yellow-right rule applies to both motorized and non-motorized vehicles.

19

2

Share

What year is the eighth-generation Honda Accord?

The eighth-generation Honda Accord was released in 2008. It is a mid-size sedan with the following dimensions: length 4945mm, width 1845mm, height 1480mm, wheelbase 2800mm, front track 1590mm, rear track 1585mm, fuel tank capacity 70 liters, trunk capacity 447 liters, and curb weight 1430kg. The eighth-generation Honda Accord is equipped with a 2.0L naturally aspirated engine producing 156PS maximum horsepower, 115kW maximum power, and 189Nm maximum torque, paired with a 5-speed manual transmission.

1

3

Share

What Causes Car AC Pipe Freezing and No Cooling?

Car AC expansion valve freezing and no cooling is a refrigerant system icing phenomenon. The specific causes may include the following: The expansion valve's adjustment is too small, resulting in excessively low low-pressure. Insufficient refrigerant in the system causes low evaporation pressure. Clogged interior circulation filter. Malfunctioning thermostat (or temperature sensor) prevents compressor shutdown. Failure of the variable displacement compressor's energy control valve (pressure regulator) keeps the compressor operating at full capacity, causing excessively low pressure and evaporator frosting. Moisture in the refrigerant freezes at low temperatures, forming ice plugs that block capillary tubes. Once capillary tubes are blocked, the refrigeration system cannot cool.

20

2

Share

How to Use the Cruise Control in the Lingpai?

The method to use the cruise control in the Lingpai is: When the vehicle speed reaches above 40 km/h, press the CRUISE button. After pressing, a green CRUISE indicator light will illuminate on the dashboard, indicating that the cruise control has been activated. The dimensions of the Lingpai are: length 4756mm, width 1804mm, height 1509mm, wheelbase 2730mm, and fuel tank capacity 40L. The Lingpai is equipped with a 1.5L naturally aspirated engine, with a maximum power of 80kW and a maximum torque of 134Nm, paired with an eCVT continuously variable transmission.

17

4

Share

What happens if the clutch is released too quickly during gear shifting?

Releasing the clutch too quickly during gear shifting can cause the car to stall. Here are some tips on clutch usage: When shifting from a lower gear to a higher gear: In this situation, there's no need to release the clutch slowly. However, it's important to shift only when the vehicle speed reaches the appropriate shifting speed. At this point, releasing the clutch during upshifting won't negatively affect the car, and since the speed has already increased, the vehicle won't stall. When shifting from a higher gear to a lower gear: You should release the clutch slowly when downshifting. If the clutch is released too quickly, you'll feel noticeable jerking. Therefore, after shifting, slowly release the clutch to give the car a transition period.

8

0

Share

What is the weight of the BMW 125i?

What is the difference between 1.5 and 1.5T car engines?

What is the yellow dotted line at an intersection?

What year is the eighth-generation Honda Accord?

What Causes Car AC Pipe Freezing and No Cooling?

How to Use the Cruise Control in the Lingpai?

What happens if the clutch is released too quickly during gear shifting?

Can a Dash Cam Monitor the Inside of the Car?

How many colors does the Soueast A5 Yiwu have?

What Are the Reasons Why the Car Still Won't Start Even After a Jump Start?

Is Antifreeze the Same as Engine Coolant?