What is the wading depth of the Jeep Compass?

1 Answers
IrisFitz
07/29/25 6:46pm
The maximum wading depth of the Jeep Compass is 480mm. The wading depth of the Jeep Compass is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when passing through waterlogged roads. Therefore, in terms of safe wading depth, the advantages of off-road vehicles and SUVs are obvious. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake of the Jeep Compass is below the water level while wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it can cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth must not exceed the height of the engine's air intake. Alternatively, the height of the engine's air intake (and thus the maximum wading depth) can be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before wading, always turn off the auto start-stop function to prevent the engine from automatically restarting after stalling in water, which could cause severe damage due to water ingress; Assess the underwater road conditions based on the passage of preceding vehicles and choose an appropriate entry point. Observe the path taken by other vehicles and follow their tracks at low speed, avoiding sudden acceleration or deceleration; On waterlogged roads, use warning water level markers, trees, or the wheels and doors of other vehicles as reference points to estimate the water depth before deciding whether to proceed; Know your vehicle's safe wading depth. If the water depth exceeds half the tire height or the engine's air intake, avoid entering the water and choose an alternative route.
Was this review help?
8
0
Share
More Forum Discussions

What is the annual maintenance cost of an Audi A4?

Due to different usage habits and varying local fee standards, the maintenance cost of an Audi A4 cannot be determined. Below are the specific details about the Audi A4: 1. Powertrain: The Audi A4 is equipped with a 2.0T four-cylinder turbocharged engine, delivering a maximum horsepower of 252 and a peak torque of 370 Nm. It has a curb weight of approximately 1.68 tons. The 0-100 km/h acceleration time is 6.6 seconds, paired with a 7-speed dual-clutch transmission. It features a front-engine, all-wheel-drive layout and five-link independent suspension on both front and rear axles. 2. Features: The Audi A4 comes with tire pressure monitoring, ESP stability control, and autonomous emergency braking. It also includes front and rear parking sensors, keyless start, and keyless entry for all doors. The 12.3-inch full LCD instrument cluster offers a rearview camera, GPS navigation, in-car Bluetooth, smartphone connectivity, and voice control functions.
20
5
Share

How is the engine and transmission of the Geely Xingyue L?

Geely Xingyue L's engine and transmission are equipped with Volvo's Drive-E series engines. High and low power versions: There are two versions of the 2.0T engine with high and low power outputs, with maximum power of 218 horsepower and 238 horsepower respectively, and peak torque of 325 Nm and 350 Nm respectively. Chassis: The Xingyue L adopts front MacPherson and rear multi-link independent suspension, and is equipped with BorgWarner's sixth-generation four-wheel drive system. Transmission: The Xingyue L Thunder God Hi.X hybrid version is equipped with a 3-speed electric drive transmission DHT Pro, which can be regarded as an intelligent energy control hub. It has the intelligent regulation capability of DHT Pro's 3-speed large speed ratio range, allowing the engine and motor to always operate in the high-efficiency range, effectively reducing fuel consumption.
13
3
Share

Is there a minimum speed limit on national highways?

National highways have a minimum speed limit of 40 kilometers per hour. Highway classification: China classifies highways into five levels: expressways, first-class highways, second-class highways, third-class highways, and fourth-class highways. The disparity in road conditions between the eastern and western regions is largely determined by China's topography, which is higher in the west and lower in the east, with more plains in the east and more mountains in the west, in addition to the influence of economic development. Driving speed: Expressways should indicate the driving speed of the lanes, with the maximum speed not exceeding 120 kilometers per hour and the minimum speed not less than 60 kilometers per hour. On expressways, the maximum speed of small passenger vehicles should not exceed 120 kilometers per hour, other motor vehicles should not exceed 100 kilometers per hour, and motorcycles should not exceed 80 kilometers per hour.
15
0
Share

What does the ECO mode in the Leiling mean?

Leiling ECO is the energy-saving mode or economy mode. The following is a detailed introduction to the driving modes of the car: 1. NORMAL mode: Achieves the best balance between fuel economy and power performance. Suitable for city driving. 2. SPORT mode: Controls the transmission and engine for quick and powerful acceleration. This mode also alters the steering feel, making it suitable for situations requiring agile driving responses, such as driving on winding roads. When Sport mode is selected, the "SPORT" indicator on the multi-information display will light up. 3. ECO mode: Helps the driver accelerate in an environmentally friendly manner and improves fuel economy through moderate throttle characteristics and control of the air conditioning system (heating/cooling). When ECO mode is selected, the "ECO-MODE" indicator on the multi-information display will light up. When the air conditioning is in use, the system automatically switches to the air conditioning ECO mode for better fuel economy.
17
4
Share

Do I need to change the transmission fluid when replacing the clutch plate?

Replacing the clutch plate does not require changing the transmission fluid, as these are two separate procedures. Hazards of not changing transmission fluid: 1. May cause damage to the transmission's shift control mechanism; 2. May lead to abnormal wear of gears and clutch plates inside the transmission; 3. Can affect normal transmission operation and cause damage to the transmission valve body. Transmission fluid and engine oil are different. While both serve lubrication purposes, they perform distinct functions and should not be confused. Key differences: Engine oil is a lubricant for the engine system with properties like oxidation resistance, anti-wear, and anti-corrosion, while transmission fluid primarily maintains cleanliness of the gear system and extends the service life of internal transmission components. Due to structural and operational differences between transmissions and engines, transmission fluid cannot substitute engine oil, nor can engine oil replace transmission fluid.
13
2
Share

What are the 6 major brands of fuel additives in the world?

The six major brands of fuel additives in the world are Chevron Techron, Red Line, BASF, 3M, STP, and Prestone. Here are the detailed introductions: 1. Chevron Techron: Chevron Techron is an automotive product brand launched by Chevron Corporation, founded in 1879. It has always focused on the research and development of gasoline products, with the fuel additive series being the most famous. Its quality is also well guaranteed, and its sales in the market are among the top. 2. Red Line: Among the top 10 fuel additive brands, Red Line was established in 1979 and is a famous American motor oil manufacturer. With the continuous expansion of the company, its industrial chain and product variety have become increasingly rich, and its quality is also guaranteed by professional institutions, widely recognized and loved by consumers worldwide. 3. BASF: BASF is a globally renowned chemical company, established in Germany in 1865. It has always focused on the research and development of automotive products and is famous for its fuel additive and industrial coating series. 4. 3M: 3M is a Fortune 500 company, established in the United States in 1902. Its product categories are particularly rich, covering household, automotive, medical, education, construction, and more. This has allowed 3M to maintain a good reputation in the market. 5. STP: STP is a brand under the AAG Group, founded in 1954. It has always focused on the research and development of automotive maintenance products and is famous in the market for its fuel, motor oil, and coolant series. It has now become one of the most representative brands in the automotive maintenance field. 6. Prestone: Prestone is a brand under Honeywell, established in the United States in 1927. It has always focused on the research and development of automotive products, with coolant and fuel additives as its main products. With professional production technology, the brand has maintained a good reputation in the market and is now the first choice for car owners.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.