···
Log in / Register

What is the violation for code 1111?

3 Answers
JohnAnn
07/29/25 6:21pm
Code 1111 indicates a violation of regulations regarding the length, width, or height of cargo loaded on a motor vehicle exceeding the prescribed limits. Below is relevant information about the violation: SMS Notification: Generally, a text message reminder will be sent within 1-3 working days after the violation. As long as the violation is handled before the annual inspection, there should be no issue. However, note that for on-site violations, a late fee will be incurred if not paid within 15 days. To pay the fine, the driver only needs to bring the vehicle's license and their own driver's license. The following violations result in a 2-point deduction: Cutting in line during traffic jams or occupying the opposite lane; Failing to wait in the designated lane at traffic lights; Overloading by less than 20%.
Was this review help?
8
3
Share
KylieMarie
08/14/25 11:04am
Having driven for decades, I'm particularly familiar with traffic rules. Code 1111 typically refers to using a handheld phone while driving, such as making calls, sending WeChat messages, or browsing short videos. This not only violates traffic laws but may also result in penalty points and fines, usually around 2 points and 200 yuan. I made similar mistakes when I was younger—once nearly rear-ending another car while answering a call. Since then, I've developed the habit of turning on Bluetooth earphones or speakerphone as soon as I get in the car. Honestly, distracted driving is a major taboo; statistics show many traffic accidents are caused by phone interference. Safe driving isn’t just for yourself—it’s also about protecting pedestrians and other drivers on the road. I recommend using voice assistants or pulling over to handle phone matters. Don’t let momentary convenience turn into a lifelong regret.
Was this review help?
20
2
Share
Expand All
DeNorah
10/14/25 5:37am
Friends often talk about traffic violation codes in casual chats. I heard that code 1111 represents holding electronic devices while driving a motor vehicle. This behavior may sound ordinary, but the consequences are severe: it directly deducts two points and imposes a fine, and it becomes even more troublesome if an accident occurs. I remember last month when I was learning to drive, the instructor repeatedly emphasized this point, saying that distracted driving due to phone use is very common, especially among young people who tend to underestimate the risks. I suggest everyone develop good habits, such as placing the phone on a holder in navigation mode or setting up auto-reply messages. Actually, loud noise inside the car can also lead to accidentally answering calls, so I use a smart bracelet's vibration alert to curb the impulse. Safety comes first—don't wait until you get fined to regret it. Practice concentration techniques regularly.
Was this review help?
1
4
Share
Expand All
More Forum Discussions

Can speed bumps be installed arbitrarily?

They can be installed. Traffic facilities are not exclusively for use by traffic authorities; private individuals can also use them, as long as they are placed in reasonable locations without issues. Introduction to speed bumps: Speed bumps, also known as speed humps, are traffic facilities installed on roads to slow down passing vehicles. They are generally strip-shaped, but some are dot-shaped; the material is mainly rubber, but some are metal; they are usually colored yellow and black to attract visual attention, causing a slight arch on the road surface to achieve the purpose of slowing down vehicles. Locations for speed bump installation: They are generally installed at road intersections, industrial and mining enterprises, schools, residential areas, and other locations where vehicles need to slow down or where accidents are prone to occur. They are specialized safety traffic installations designed to reduce the speed of motor vehicles and non-motor vehicles.
19
4
Share

Why Is There Abnormal Noise from the Tires While Driving?

Tire abnormal noise is usually caused by foreign objects stuck in the tire treads. The gaps between tire treads vary in size, and if larger stones, metals, or other hard objects get stuck in these gaps, they can collide with the ground during tire rotation, producing abnormal noise. Here is some relevant information about tire abnormal noise: 1. Cleaning: If stones are stuck in the tires, they should be promptly removed. When there are not many stones, you can use a screwdriver to pick out the small stones from the grooves in daily maintenance. If there are many stones, you can have them removed during maintenance at a 4S shop or repair shop. 2. Tire Replacement Time: Under normal circumstances, tires installed on a car can be used for four years, so it is recommended to replace the tires every four years.
8
1
Share

Should the Shock Absorber Rubber Sleeve Be Replaced If It's Damaged?

Shock absorber rubber sleeve should be replaced if it's damaged. The shock absorber is a vulnerable component during vehicle use, and its performance directly affects the smoothness of the car's ride and the lifespan of other parts. Below are the impacts of a damaged shock absorber rubber sleeve: Causes abnormal noises: When the shock absorber top rubber is severely worn and damaged, the vehicle's shock absorber will produce unusual noises during operation. Directional deviation: If the shock absorber top rubber is damaged, the vehicle's steering may exhibit slight deviations, difficulty in returning to center, and reduced return force. Increased noise: Due to the reduced cushioning effect of the top rubber, the shock absorber will transmit the absorbed impacts directly from the frame to the passenger compartment during operation.
7
0
Share

What is the fuel consumption of the Changan Xinbao T3?

According to the official data from the Ministry of Industry and Information Technology, the fuel consumption of the Changan Xinbao T3 is 8.1 liters per 100 kilometers. Here is some relevant information about the Changan T3: 1. Advantages of the Xinbao T3: The Xinbao T3 boasts strong power, advanced technology, low emissions, low fuel consumption, low noise, and high reliability. 2. Loading capacity: The cargo box of the Xinbao T3 measures 3100×1600×380mm (length×width×height), with excellent overall dimensions in its class. The single-row cargo box length is 2.82 meters/3.1 meters, while the double-row cargo box length is 2.22 meters/2.52 meters. Therefore, it can meet diverse transportation needs, whether for wholesale, retail, or self-employed use.
10
1
Share

Are Manual Transmission Fluid and Rear Axle Fluid Interchangeable?

Manual transmission fluid and rear axle fluid are not interchangeable. The fluids used for the transmission and the rear axle are different. When replacing transmission fluid, it is essential to use specialized transmission fluid and not substitute it with other types of fluids. Transmission fluid is crucial for the transmission system as it serves to transfer power, dissipate heat, provide lubrication, and prevent rust. Below are the functions of transmission fluid and rear axle fluid: Functions of Transmission Fluid: Transmission fluid is a lubricant that maintains the cleanliness of the gear system, prolongs the lifespan of the transmission components, and ensures effective lubrication even in low-temperature conditions. It also minimizes fluid loss under harsh operating conditions. Depending on the transmission type, transmission fluid is categorized into automatic transmission fluid and manual transmission fluid. Functions of Rear Axle Fluid: Rear axle fluid, also known as gear oil, not only provides excellent lubrication but also helps in cooling. If the rear axle fluid is not replaced for an extended period, it can deteriorate, losing its ability to protect the rear axle gears. This accelerates gear wear and can significantly impact the vehicle's fuel efficiency, so it is important to pay attention to this.
18
0
Share

What is a vehicle recall?

A vehicle recall is a process conducted by the manufacturer of defective automotive products to eliminate product defects in accordance with legal requirements and procedures. According to the "Regulations on the Recall of Defective Automotive Products": Article 19: For defective automotive products subject to recall, the manufacturer shall promptly take corrective measures such as modification, supplementary labeling, repair, replacement, or refund to eliminate the defects. The manufacturer shall bear the costs of eliminating the defects and the necessary transportation expenses for the defective automotive products. Article 24: If a manufacturer violates the provisions of these regulations and falls under any of the following circumstances, the product quality supervision department shall order corrections and impose a fine ranging from 1% to 10% of the value of the defective automotive products; any illegal gains shall be confiscated; if the circumstances are serious, the licensing authority shall revoke the relevant licenses.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.