What is the tutorial for replacing the low beam bulb of Baojun 560?
2 Answers
Baojun 560 low beam bulb model is H7. The replacement tutorial is as follows: 1. Unplug the power connector of the bulb. 2. After unplugging the power connector, remove the waterproof cover behind the bulb. 3. Take the bulb out of the reflector. The bulb is usually fixed by a steel wire clip. Some models of bulbs also come with a plastic base. 4. Place the new bulb into the reflector, align the fixing position of the bulb, pinch the steel wire clips on both sides and push inward to fix the new bulb in the reflector. 5. Re-cover the waterproof cover, plug in the bulb power supply, and the replacement operation is completed.
I often change car parts myself, including the low beam bulbs. On the Baojun 560, the low beam is located in the engine compartment, towards the front, making it easy to find. The first step is to turn off the engine and lights, allowing the car to cool for a few minutes. Then, open the hood, and you can usually see the bulb cover near the headlight assembly. Use a screwdriver to loosen the fixing clip or buckle, and gently pull out the old bulb. Remember not to touch the glass part of the new bulb directly with your hands, as skin oils can affect its lifespan—it's best to wear gloves. For the new bulb, choose an H7 model halogen or LED, depending on your preference. When reinstalling, align it with the socket, push it in firmly, and then test to ensure the light works properly. If the light is uneven or flickers, there might be poor contact, requiring a recheck. Regularly inspecting the bulbs can prevent nighttime driving hazards; it's recommended to check them once a year. Doing it yourself saves time and money, and choosing a good brand of bulb can improve brightness, making driving safer.
