What is the transmission model of the Nissan Quest?

1 Answers
MacAngelo
07/24/25 7:54pm
The transmission model of the Nissan Quest is a CVT transmission. The CVT transmission, also known as a continuously variable transmission, is a common type of automatic transmission. It consists of only two pulleys and a steel belt, which moves between the pulleys to achieve variable speed and torque. This method of torque variation allows the engine to maintain an optimal speed range, improving fuel efficiency. The Nissan Quest is an MPV model under the Nissan brand. It is equipped with a 3.5-liter naturally aspirated V6 engine, coded as VQ35, featuring a continuous variable valve timing system and an aluminum alloy cylinder head and block. The engine delivers a maximum power of 204 kW and a maximum torque of 326 Nm, with the maximum power achieved at 6000 rpm and the maximum torque at 4400 rpm.
Was this review help?
3
0
Share
More Forum Discussions

What Behaviors Drain the Battery?

Behaviors that drain a car battery include forgetting to turn off lights and onboard electrical devices after turning off the engine, not turning off the air conditioning before shutting down the engine, and frequently starting the vehicle. Here are some methods to maintain your car battery: 1. In-car power usage: To preserve the car battery, avoid actions such as listening to the radio loudly, charging your phone, or using an air pump while the engine is off. Prolonged use can lead to battery depletion, and frequent depletion significantly reduces battery life. 2. Long-distance high-speed driving: Regularly driving at high speeds has many benefits, not only clearing carbon deposits from the engine but also fully charging the battery. Generally, driving at high speeds for more than an hour can fully charge the battery, keeping it in optimal condition. 3. Avoid prolonged vehicle inactivity: If the car is not used for an extended period, disconnect the battery or start the vehicle every two weeks and drive for several dozen kilometers to ensure the battery remains functional. 4. High-power electrical connections: Many modern car appliances, such as car refrigerators, vacuum cleaners, and air pumps, have high instantaneous power consumption. Avoid directly powering these devices with the car battery. Instead, start the vehicle first before connecting the electrical devices.
12
5
Share

How many days in advance will I receive a text message after successfully scheduling the Subject 3 test?

After successfully submitting the scheduling application, you can check the acceptance status of the appointment in the online progress section. If the appointment is successful, you can print the appointment voucher from the completed business page. Generally, you will receive a text message about the specific exam arrangements approximately one week before the test (some users may not receive it due to network or other reasons). Below is an introduction to the driving test subjects: 1. Subject 1: Also known as the theoretical test or driver's theory test, it is part of the motor vehicle driver's license assessment. 2. Subject 2: Also known as the small road test, it includes five test items: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving along a curve. 3. Subject 3: Also known as the big road test, it is the road driving skills test in the motor vehicle driver's license examination. 4. Subject 4: Also known as the theoretical test or driver's theory test.
11
0
Share

How many hours can a passenger vehicle driver drive continuously during the day?

According to Article 38 of the "Safety Management Regulations for Road Passenger Transport Enterprises," passenger transport enterprises must strictly adhere to regulations regarding drivers' driving and rest times when formulating transportation plans: the cumulative driving time within 24 hours must not exceed 8 hours. The continuous driving time during the day must not exceed 4 hours, and the continuous driving time at night must not exceed 2 hours. Each rest stop should last no less than 20 minutes. Below are some driving precautions: 1. Check the rearview mirrors: When turning or changing lanes, always use the turn signals and reduce speed. Before turning, always check the rearview mirrors. For left turns, primarily check the left rearview mirror; for right turns, primarily check the right rearview mirror. For both left and right turns, always check the interior rearview mirror. 2. Avoid staring at the front of the vehicle: When driving on clear roads, look straight ahead at a distance of 100 meters, and avoid staring at the immediate front of the vehicle. 3. Depress the clutch: Generally, when decelerating at speeds above 40 km/h, there is no need to depress the clutch first. Wait until the speed drops to around 20 km/h before depressing the clutch. 4. Steering: For high-speed turns, steer slowly; for low-speed turns, steer quickly.
19
3
Share

What is the reason for always pressing the right line during a right-angle turn?

Here are the reasons why the right line is always pressed during a right-angle turn: 1. The speed is too fast: The speed should not be too fast, as it will be difficult to control the vehicle body, making it easy to press the corner or the line. 2. The position is too close: Before turning, the distance between the vehicle body and the inner line should not be too close, otherwise, insufficient reserved space will cause pressing the line. 3. The turning point is inaccurate: If the turning point is not accurately found during the turn, the possibility of pressing the line will greatly increase. Turning too early will press the inner corner, and turning too late will press the outer line. Below is an introduction to the driving test: 1. Subject 1: Also known as the theoretical test or driver theory test, it is part of the motor vehicle driver's license assessment. 2. Subject 2: Also known as the small road test, it includes five test items: reversing into a garage, parallel parking, stopping and starting on a slope, right-angle turns, and curve driving. 3. Subject 3: Also known as the big road test, it is the road driving skill test in the motor vehicle driver's test. 4. Subject 4: Also known as the theoretical test or driver theory test.
12
5
Share

How to Repair a Worn Leather Steering Wheel?

The repair methods for a leather steering wheel vary depending on the extent of wear. Below are the repair methods for a worn leather steering wheel: 1. Minor wear: Purchase a specialized leather steering wheel repair solution and apply it to the worn area according to the instructions. 2. Small cracks: If small cracks appear, apply acrylic resin to the cracks, align the edges, and dry them with the cool air setting of a hairdryer. 3. Tears: If there is a tear, cut a piece of lining slightly larger than the damaged area and place it underneath the tear. Then apply leather adhesive. Place a layer of cotton cloth over the damaged area and press it flat with an iron. Once the leather sets, remove the cotton cloth. If the crack is noticeable, apply a color paste matching the original color. 4. Unable to repair yourself: If the damage is beyond your ability to repair, take the steering wheel to a professional automotive detailing shop for refurbishment. Refurbishment techniques can maximize the repair of the worn area.
9
5
Share

How to Remove the Front Windshield Film?

The methods for removing the front windshield film are as follows: 1. After peeling off the film, generally use detergent water and a razor blade to remove the residues. You can also use a steel wool pad with detergent water, but make sure it's brand new. Avoid using a steel wool pad that has been used for scrubbing pots, as it may have grease stains that can stick to the glass and make cleaning more difficult. 2. It's important to note that most rear windshields come with defogger heating wires. If you directly use a razor blade or steel wool pad to clean, you may damage these heating wires, causing the rear windshield to lose its defogging function. Similarly, some side rear triangular glass panels have radio antennas, so extra caution is needed. 3. For cleaning glass with defogger heating wires, you can use hot water mixed with detergent and a slightly rough cloth or a cloth used for cleaning car interiors. Clean slowly and carefully. If the film was of poor quality, there might be remnants that are hard to peel off completely. In such cases, you can use a razor blade to scrape them off bit by bit, being careful not to scratch the heating wires. If the defogger heating wires are not needed, you can directly clean with a razor blade or steel wool pad.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.