What is the transmission fluid model for the 8th generation Accord?

What is the China III Emission Standard?

China III standard refers to the third stage of China's vehicle emission standards. The national third-stage emission standard is equivalent to the Euro III emission standard, meaning the content of tailpipe pollutants is comparable to that of Euro III. According to the regulations of the Ministry of Environmental Protection, starting from January 1, 2008, diesel vehicles, natural gas vehicles, and liquefied petroleum gas vehicles with a maximum total mass exceeding 3,500 kg began implementing the "China III Standard," excluding gasoline vehicles. From July 1, 2008, all vehicles with a maximum total mass of 3,500 kg or less started implementing the "China III Standard." After the implementation of the China III Standard, a one-year transition period was granted for the production and sale of vehicles manufactured under the "China II Standard" to allow manufacturers and sellers time to adapt to the new standards. The China IV Emission Standard was introduced in 2011 and remained in effect until the implementation of the China V Standard in 2018. Therefore, vehicles produced between 2011 and 2017 comply with the China IV Standard. The China IV Standard requires a reduction of approximately 50% in the emission levels of various pollutants compared to the China III Standard.

20

5

Share

Why does the ABS light come on and the car cannot be locked in Baojun?

If the ABS warning light is on and the car cannot be locked in a Baojun, you can troubleshoot based on the following aspects: 1. Conduct a visual inspection of the system to check for damaged wires, loose connectors, or low brake fluid levels, etc.; 2. Use a diagnostic scanner to read the fault codes and identify the issues they represent; 3. Based on the interpreted fault conditions, use necessary tools and instruments to conduct an in-depth inspection of the faulty components to confirm the location and cause of the issue; 4. If the warning light remains on, there may still be a fault in the system, or the fault may have been resolved but the fault code was not cleared. Additional information: 1. Reasons for the ABS light coming on: 1. Faulty wheel speed sensor; 2. ABS wiring fault; 3. Fault with the ABS pump or pressure control solenoid valve; 4. ABS computer fault. 2. ABS stands for Anti-lock Braking System. During braking, ABS automatically controls the braking force to prevent wheel lock-up, keeping the wheels in a rolling-sliding state to maximize traction between the tires and the road. ABS not only provides the braking function of a conventional braking system but also prevents wheel lock-up, allowing the car to steer while braking, ensuring directional stability and preventing skidding or deviation.

8

3

Share

How many days does it take to get a license plate for a new car?

For a new car, the license plate registration can be completed in one day if expedited, or it may take around 2 working days for standard processing. The process of registering a new car involves purchasing insurance, paying the purchase tax, vehicle inspection, and selecting a license plate number. Below are the relevant details: Registration time: It is advisable to avoid the peak period for new car registration each year, as during these times, it may be difficult to even enter the vehicle management office. The normal working hours of the vehicle management office are from Monday to Friday, 9:00 AM to 5:00 PM. Registration procedures: Before registering, the new car must have the vehicle purchase tax and compulsory insurance policy completed. Only then can the new car registration proceed. (Note: If purchasing a car from another region, the vehicle must meet local emission standards, and the purchase tax must be paid at the local tax department). For other requirements, you only need to bring the documents provided by the 4S store (vehicle certification, purchase invoice, import vehicle certificate) along with the original and photocopy of your ID card. Additionally, if you are not a local resident, you will need to obtain a local residence certificate.

12

0

Share

What Causes the Tire Pressure Not to Display?

When the tire pressure monitoring system fails to display readings, the first step is to identify which monitoring method it uses. This issue commonly occurs when the module of an internal tire pressure monitoring system malfunctions, and replacing the tire pressure monitor usually resolves it. There are three commonly used tire pressure monitoring methods: Direct Tire Pressure Monitoring: Direct tire pressure monitoring devices use pressure sensors installed in each tire to directly measure tire pressure. Wireless transmitters send pressure data from inside the tires to a central receiver module, which then displays the pressure readings for each tire. The system automatically alerts when tire pressure is too low or if there's a leak. Indirect Tire Pressure Monitoring: When a tire's pressure decreases, the vehicle's weight causes that tire's rolling radius to reduce, making it rotate faster than the other wheels. By comparing rotational speed differences between tires, the system monitors tire pressure. Indirect tire pressure alert systems essentially rely on calculating tire rolling radius to monitor pressure. Introduction to Tire Pressure Monitoring System (TPMS): This system combines the advantages of both above-mentioned systems. It equips direct sensors in two diagonally opposite tires while incorporating a 4-wheel indirect system. Compared to using only direct systems, this hybrid approach reduces costs and overcomes the indirect system's inability to detect simultaneous underinflation in multiple tires. However, it still cannot provide real-time pressure data for all four tires like direct systems can.

20

0

Share

Should the car air conditioner be set to recirculate in summer?

When using the air conditioner in summer, you can first turn on the external circulation to expel the hot air. Once the temperature inside the car has dropped, you can switch to internal circulation. However, for long-distance driving, it is recommended not to use internal circulation but to keep the external circulation on to prevent driver fatigue, as external circulation allows air flow and keeps the air fresh. Precautions for using the air conditioner: 1. Note 1: Do not blow the air conditioner directly at yourself for a long time when using it, as it is not good for your health. 2. Note 2: When using a home air conditioner, remember to open windows regularly for ventilation to avoid stagnant air. 3. Note 3: Clean the air conditioner regularly. If the evaporator needs cleaning, it is advisable to have it done by a professional. 4. Note 4: Avoid blowing the air conditioner directly after intense exercise, as it may lead to catching a cold. 5. Note 5: Air conditioners come in different grades. Pay attention to the energy efficiency ratio when purchasing, and choose the installation method according to your needs. 6. Note 6: If the air conditioner is not working, it is recommended to check after powering off. Avoid disassembling it yourself, as the internal components are quite delicate. It is best to contact after-sales service for repairs.

20

0

Share

What does chassis brake electric power assist mean?

Electric Power Assist Steering (EPAS) is a power steering system that directly relies on an electric motor to provide auxiliary torque, offering assistance according to different working conditions. Compared to traditional hydraulic power steering systems, EPAS has advantages such as lighter weight, space-saving, energy efficiency, and easier integration. However, the system cost is higher, and the friction and inertia generated within the system may affect steering characteristics. Power Steering System: The power steering system is a steering system that combines the driver's physical effort and the engine's power as the steering energy source. Under normal circumstances, only a small portion of the energy required for steering is provided by the driver, while the majority is supplied by the engine through a steering booster. However, if the steering booster fails, the driver should generally still be able to independently handle the vehicle's steering tasks. Power Brake System: In the power brake system, the energy used for braking is either pneumatic energy generated by an air compressor or hydraulic energy produced by a hydraulic pump. The air compressor or hydraulic pump is driven by the vehicle's engine, making the engine the sole initial energy source for braking. However, within the scope of the brake system, the energy source can be considered as the air compressor or hydraulic pump. In the power brake system, the driver's physical effort serves only as a control energy source, not as the braking energy source.

2

3

Share

What is the transmission fluid model for the 8th generation Accord?

What is the China III Emission Standard?

Why does the ABS light come on and the car cannot be locked in Baojun?

How many days does it take to get a license plate for a new car?

What Causes the Tire Pressure Not to Display?

Should the car air conditioner be set to recirculate in summer?

What does chassis brake electric power assist mean?

Causes and Solutions for Low Oil Pressure

What does left tire pressure loss mean?

Which engine oil is more suitable for cars in winter?

What cars are built on the CMA platform?