···
Log in / Register

What is the tire size of the Great Wall Haval H6?

6Answers
StJade
07/29/2025, 06:13:19 PM

Haval H6 models come with two tire specifications: 235/60R18 tires and 235/55R19 tires. According to the Haval H6 tire parameters provided by PCauto, the tire size for the entire Haval H6 series is 225/65R17. The numbers in the tire model indicate the load index of a single tire. The higher the index, the greater the load capacity the tire can bear. Additional information: 1. 235/60R18 tires: The tire width is 235MM, the aspect ratio of the tire section is 60%, meaning the section height is 60% of the width, and the rim diameter is 18 inches. 2. 235/55R19 tires: The tire width is 235MM, the aspect ratio of the tire section is 55%, meaning the section height is 55% of the width, and the rim diameter is 19 inches. 3. When a vehicle is severely overloaded or fitted with tires that have a load index that is too low, the risk of a tire blowout increases significantly. The last letter in the tire model represents the speed rating of the tire. If the vehicle speed exceeds the speed rating of the selected tire, the tire will be on the verge of a blowout.

Was this review help?
102
Share
ORicardo
08/15/2025, 06:32:13 PM

I've been driving the Great Wall Haval H6 for three years, having used both the standard and high-end versions. The factory tires are usually 225/65 R17, which perform stably in urban areas and on highways with good grip. The ride is particularly smooth, and it's not uncomfortable on bumpy roads, but there's a bit of slipping when climbing hills. I often take long-distance trips and have found that regular checks on tire pressure and wear are crucial. Using a tire depth gauge every six months to measure tread depth ensures safety. If you drive on mountain roads frequently, I recommend switching to all-terrain tires to enhance off-road performance. Overall, the H6's tire design leans towards practicality, making it reliable enough for daily commuting.

Was this review help?
9
Share
Expand All
LaJuniper
10/17/2025, 04:21:10 AM

As someone who frequently deals with cars, I've seen many Haval H6s come in for tire repairs. The standard tire size is 225/65 R17, while the high-end version might have 235/60 R18. When replacing tires, always stick to the original factory specifications—don't randomly change sizes, as it can affect suspension and fuel consumption. I recommend owners check the tire balance every 10,000 kilometers to look for signs of uneven wear. For daily driving, maintaining a tire pressure around 2.3 bar can help save on fuel costs. If you notice any bulges or cracks, replace the tire immediately—don't wait until it bursts, which could be dangerous.

Was this review help?
12
Share
Expand All
VonJaxon
11/30/2025, 09:16:34 PM

I was quite excited when I first bought my Haval H6. The new car came with 225/65 R17 tires, which looked stylish. It turned heads when driving on the street, and the acceleration was smooth, though I felt it was a bit soft when cornering. Occasionally, I go for weekend drives in the suburbs with friends, and the tires perform decently on wet and muddy roads with average grip. If you're aiming for a cooler look, upgrading to slightly wider tires can enhance the visual impact. Maintenance is straightforward—just clean the tread monthly to prevent aging and add some air when seasons change.

Was this review help?
6
Share
Expand All
MacMargaret
01/20/2026, 10:40:27 PM

As the primary driver for family use, I have taken my wife and kids out multiple times in my Haval H6. The tire specifications are 225/65 R17, with thick tread layers that absorb vibrations well and provide low noise on highways. For safety, I insist on visually inspecting the tread wear indicators weekly to avoid unexpected air leaks. When roads are slippery in winter, the grip is stable enough, but snow chains are not very easy to install. Regularly replacing the original tires helps maintain fuel economy, and when it's time for new ones after a few years, sticking to the same model is reliable.

Was this review help?
10
Share
Expand All
VonPenelope
04/16/2026, 11:08:38 PM

Having used the Great Wall Haval H6 for a full four years, the original 225/65 R17 tires typically require replacement every 50,000 kilometers. Daily city driving results in slower wear, and maintaining tire pressure at 2.5bar helps save fuel. However, frequent long-distance trips accelerate tread wear, so it's advisable to get a four-wheel alignment every two months to prevent uneven wear. The tire size is designed to balance comfort and road feel, and switching to low rolling resistance tires can further extend range. It's also crucial to note the tire's manufacturing date; if they're over five years old and showing signs of aging, replace them promptly.

Was this review help?
18
Share
Expand All
More Q&A

What Causes Excessive White Carbon Deposits on Motorcycle Spark Plugs?

Motorcycle spark plugs accumulate excessive carbon deposits primarily due to burning engine oil, poor-quality gasoline, overly rich air-fuel mixture from various causes, carburetor malfunctions, frequent low-speed or short-distance riding, and repeated startups. When severe carbon buildup occurs, simply replacing the spark plug with a new one suffices. As part of the engine's ignition system, spark plugs are wear-prone components requiring periodic replacement. Key ignition system components include the ignition coil and spark plugs. Motorcycle spark plug replacement procedure: 1. Locate the cylinder head position and identify the spark plug cap. Before removal, use compressed air to clean surrounding areas, preventing debris from falling into the combustion chamber through the installation hole during spark plug removal. 2. Use the onboard/specialty tool to rotate the spark plug counterclockwise. If no dedicated removal tool is available, a wrench can alternatively perform this counterclockwise rotation. 3. Manually extract the spark plug for inspection and cleaning. Note that onboard tools lack magnetic retention or fixed bases, potentially causing dropped spark plugs during extraction. 4. After removing the old spark plug, install the new one by reversing the removal steps.
115
Share

What are the symptoms of a bad crankshaft pulley?

Crankshaft pulley damage has a significant impact on the vehicle. The car's power performance will be very poor, and the engine may produce unusual sounds when idling or accelerating. Below is a detailed introduction to the crankshaft pulley: 1. The car pulley is mainly installed on the car engine crankshaft to drive the camshaft, water pump, generator, air conditioning compressor, power steering pump, and other components. 2. The function of the pulley: It drives the water pump, generator, and air conditioning compressor to work. The water pump ensures the normal water circulation of the engine for cooling purposes. The generator charges the battery to ensure the normal operation of various electrical circuits in the car. The air conditioning pump, also known as the compressor, is used in the air conditioning system. 3. Advantages of pulley drive: The pulley drive can mitigate load impacts; it operates smoothly with low noise and vibration. The structure of the pulley drive is simple and easy to adjust. The manufacturing and installation precision of the pulley drive is not as strict as that of meshing drives. The pulley drive has an overload protection function. The center distance between the two shafts in the pulley drive can be adjusted over a wide range.
103
Share

The Differences Between Geely Emgrand GS and Emgrand S

Geely Emgrand GS and Emgrand S differ in the following aspects: Price: The top variant of Emgrand S is officially priced lower than that of Emgrand GS. Overall Body: The top variant of Emgrand S has a shorter body length compared to Emgrand GS, but both share the same wheelbase. Power Output: The top variant of Emgrand GS delivers stronger performance than Emgrand S. Product Positioning: Although Emgrand S shares many similarities with Emgrand GS in terms of vehicle type, Emgrand S focuses more on brand upgrades in youthful sportiness, fashion sense, and technological appeal.
101
Share

What Causes the Abnormal Noise from the Left Rear Wheel After Hitting a Pothole?

Car left rear wheel wear is severe: If the car's left rear wheel is severely worn, with bulges or out-of-round conditions on the tire, abnormal noises will occur while driving, especially on uneven road surfaces where the noise becomes more pronounced. In this case, timely repair or replacement of the tire is necessary to avoid safety hazards. Car left rear shock absorber is damaged: There are many reasons for damage to the car's left rear shock absorber, mainly including damage to the plane bearing, ball joint, or spring. This situation requires a detailed inspection and repair by professionals at a repair shop or 4S store. Foreign objects on the car's left rear wheel: When passing over a pothole, if there are foreign objects attached to the car's left rear wheel, such as small stones, abnormal noises will occur while driving. In this case, simply cleaning the left rear wheel promptly will resolve the issue.
101
Share

How Many Days to Receive SMS After Running a Red Light?

After running a red light, the violation notification SMS is usually received within 3 to 7 days, with the latest being around 13 days. However, some cities now offer "instant electronic police capture alerts," where you can receive an SMS notification within 5-10 minutes of being captured. But this notification does not equate to a violation; it merely serves as a capture alert. The final determination of whether it constitutes a violation takes 3-7 days. If it is indeed a violation, you will receive another SMS notification. For traffic violations captured by surveillance cameras, vehicle owners generally do not receive an SMS notification immediately. There is a delay, and the duration may vary. After the electronic camera captures the violation, the relevant violation information needs to be transmitted through a dedicated channel to the traffic police management center, where it is compiled and then verified by relevant staff. If confirmed as a violation, the system automatically retrieves the vehicle owner's phone number based on the license plate information and sends the violation details via SMS. After receiving the violation SMS, the vehicle owner must go to the traffic police department at the location of the violation within one month before the annual vehicle inspection to handle the matter. Generally, if a vehicle owner suspects a violation, they can use 15 days as a benchmark. If no violation SMS is received beyond 15 days, it is likely that no violation was recorded. Traffic Violation Query Methods: Traffic violation queries refer to checking motor vehicle violations of traffic management through online platforms or query terminals. Methods include website queries, phone queries, SMS queries, and mobile app queries. Website Query: Search for "vehicle violation query" and enter vehicle information to check. Phone Query: Dial local 114 (area code + 114) or 12580 to confirm traffic violations. Violations can only be processed at the location of the violation or the vehicle's license plate issuance office. For on-site violations, such as those caught by traffic police, they must be handled at the violation location. SMS Query: Open the SMS interface on your phone, enter "WZ [license plate number] [license plate color]," and send it to 1062650001. Mobile App Query: Open the "Traffic Management 12123" app, select "Violation Query," and clear any unresolved violations.
120
Share

What is a Connecting Rod Bearing?

Connecting rod bearings are paired with crank pins to reduce wear on the crank pins. In crosshead-type connecting rods, the big end bearing is often made separately and then securely attached to the rod body using connecting rod bolts. A friction-reducing alloy is typically cast directly onto the inner surface of the bearing. For non-crosshead-type connecting rods, the upper half of the big end bearing is usually integrated with the rod body, while the lower half (bearing cap) is manufactured separately and then bolted to the upper half using connecting rod bolts. Both the upper and lower halves of the bearing are lined with bearing shells. Some connecting rod bearings feature oil holes drilled into the inner surface of the bushing, and some may also have oil grooves to facilitate lubrication. Self-aligning or platform-type small end bearings are commonly used.
110
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.