What is the tire pressure for Changan CS55?

3 Answers
ReedAnn
07/28/25 11:49pm
Changan CS55 generally has a tire pressure of 2.4 to 2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and reduced by 0.1 bar in summer. The tire pressure of Changan CS55 can be viewed on the display screen in the middle of the dashboard. The tire pressure monitoring of CS55 does not require manual activation; it automatically turns on when the vehicle starts. Press the scroll button on the left side of the steering wheel to find the tire pressure value. If the tire pressure monitoring indicator light comes on (a yellow symbol, an irregular circle without a seal on top, with four small spikes at the bottom and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure. It usually alerts when the pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset. After inflating the tires, if the tire pressure is not reset in time, the tire pressure monitoring system will still record the previous data, causing the tire pressure monitoring indicator to light up. Simply perform a tire pressure reset to resolve this. Damaged tire pressure sensor. The tire pressure sensor, used to monitor tire pressure, is directly installed inside the tire and connected to the tire inflation port. If the tire pressure sensor is damaged during driving, it can also cause the tire pressure fault light to come on. For sensor damage issues, only a complete replacement with a new part is possible.
Was this review help?
11
5
Share
EmmanuelLee
08/12/25 3:04am
I've been driving the Changan CS55 for several years. I remember the manufacturer recommends a cold tire pressure generally between 2.3 to 2.5 bar, which can be found on the label inside the B-pillar or fuel filler cap. Don't exceed 2.6 when driving on highways in summer, as excessive heat may cause tire blowouts. In winter, properly increasing it to 2.5 can save some fuel. Last week, I noticed my front right tire dropped to 2.1, and only found a nail puncture after checking at the repair shop. I recommend keeping a simple tire pressure gauge handy - checking monthly is especially convenient, particularly during seasonal transitions when temperature differences cause noticeable tire pressure changes.
Was this review help?
9
2
Share
Expand All
LaJake
10/01/25 6:24am
Last time I took my CS55 for maintenance, the technician specifically emphasized adjusting tire pressure according to the label on the door frame. My car indicates 230kPa for the front tires and 240kPa for the rear tires, with the rear tires adjustable to 250 when carrying heavy loads. Once the tire pressure warning light suddenly came on, and upon checking, it was below 2.0, which turned out to be due to wheel alignment issues causing uneven wear. Now I use an electric air pump to top up the air myself, as the free air pumps at gas stations are often inaccurate, requiring verification with a mechanical gauge after inflation.
Was this review help?
9
3
Share
Expand All
More Forum Discussions

What does the three guarantees for cars refer to?

The three guarantees actually refer to guarantee for repair, replacement, and refund, collectively known as the three guarantees. When consumers purchase a car, they can enjoy the "three guarantees" policy. When buying a car, it is essential to pay attention. Before signing the contract, we should confirm whether the "three guarantees" policy is written in the contract. If quality issues arise in the car during the three guarantees period, the 4S store is required to provide free repairs for consumers and cannot charge for labor or material costs. A car is a highly complex product. A car is not just a machine, so when you pick up the car, you must inspect it. If there are problems with the car, do not accept it. When inspecting the car, first check if there are any defects on the body paint surface, then look for any dents on the body surface. Next, open the engine hood to see if the screws on major components have been removed or show signs of rust. Then, enter the car to check for any interior defects. Finally, start the engine for a test drive to listen for any abnormal noises or vibrations during operation and to feel whether the transmission shifts normally.
16
0
Share

Why won't the Magotan's trunk pop up?

There are mainly two reasons why the Magotan's trunk won't pop up, which are: First reason: The sealing strip has aged, causing the rear lid to stick. Second reason: The spring force of the rear lid has weakened. The solution involves the following three steps: Step one: Remove a corner of the interior trim panel. Step two: Move the hook of the rear lid spring back one notch. Step three: Restore the interior trim panel. Here are some additional points: 1. When the trunk lid is equipped with hangers or a luggage rack and is loaded with items, do not open the trunk lid. Similarly, if the trunk lid is loaded with items such as a bicycle, do not open it, as the trunk lid may close on its own due to its own weight and additional load. If it is necessary to open the trunk lid, it must be securely supported with an appropriate prop or the load must be removed. 2. When the car is not in use, always close and lock the trunk lid and all doors. Before closing, ensure that no one is inside the car.
12
2
Share

What is the general mileage for a vehicle's first maintenance?

Vehicle first maintenance mileage generally requires attention to the following: 1. The period from when a new car is driven until its first maintenance is called the break-in period. During the break-in period, since the gears of the engine, transmission, etc. have not yet fully worn in smoothly, we generally should not drive too fast—absolutely do not exceed 100 km/h, and it's best not to exceed 80 km/h. 2. During the break-in period, in addition to not exceeding 100 km/h, the engine speed should also not exceed 3000 RPM. Avoid accelerating too aggressively, as it can negatively affect the engine's break-in. A proper break-in will result in fewer driving issues later and better fuel efficiency. 3. At what mileage should a new car undergo its first maintenance? After a new car is driven, 4S shops usually require owners to come in for the first maintenance within 3000 km. However, car manufacturers actually require owners to complete the first maintenance within 5000 km. Therefore, it is crucial not to exceed 5000 km before getting the first maintenance. If normal maintenance is not performed according to the user manual, it is equivalent to voiding the warranty, and the 4S shop and manufacturer have the right to refuse warranty repairs if issues arise.
4
0
Share

How much impact will the implementation of China VI have on China V?

According to the China VI standards, the emissions from China IV and China V vehicles will have minimal impact on our future lives. Currently, the number of China III, China IV, and China V vehicles in China is enormous, and the government cannot enforce a blanket ban. The nationwide implementation of "China VI" will pressure owners of vehicles below the China VI standard to replace their cars. If this is enforced, it could develop into a social issue. The impact of China VI on China V vehicles is that they will depreciate faster. For China V vehicle owners, the good news after the implementation of the new China VI standard is that they can still drive normally without affecting the vehicle's regular use. However, with the implementation of the China VI emission standard, the resale value of China V used cars will undoubtedly show a downward trend, meaning they will depreciate faster after China VI is implemented. Although the implementation of the China VI standard poses a depreciation risk for China V vehicles, it also presents a great opportunity for consumers to "snag a bargain." After China VI is launched, China V models will have certain discounts, making them a viable option for buyers in second- and third-tier cities. Overall, under current circumstances, the implementation of the China VI emission standard has limited impact on China V models, which can still be driven normally, though it will affect the resale value of older vehicles.
2
3
Share

What size memory card is needed for a dash cam?

Generally, a dash cam requires a 16GB or 32GB memory card. If you need to record more videos or require higher resolution, a 64GB or larger card is recommended. Common memory card capacities available in the market for dash cams include 8GB, 16GB, 32GB, and 64GB. Key considerations when selecting a dash cam: video resolution and recording mode. Video resolution: When choosing a dash cam, the first thing to consider is its video resolution. It should be able to clearly capture pedestrians' faces or vehicle license plate numbers. Typically, a 1080P resolution is sufficient. Lower resolutions may produce overly blurry footage with limited value, while excessively high resolutions consume too much storage space, leading to frequent memory card replacements and unnecessary hassle. Recording mode: In addition to resolution, it's important to select a dash cam with loop recording. When the memory card is full and not replaced in time due to oversight, critical incidents may go unrecorded. A dash cam with loop recording can overwrite old footage with new recordings when the memory card is full, ensuring no potential event is missed.
8
1
Share

How to Connect Batteries in Parallel?

How to connect batteries in parallel: First, clearly identify the positive and negative terminals of both batteries. If you need to connect them in parallel, connect the positive terminals of both batteries together, and then connect the negative terminals together. This achieves the parallel connection of the two batteries. The characteristics of parallel-connected lithium batteries are: voltage remains unchanged, internal resistance is reduced, the battery capacity is the sum of the two batteries, and the power supply time is extended. The core content of parallel charging is the magnitude of the parallel current and its effect. According to parallel circuit theory, the current in the main circuit equals the sum of the currents in the individual branches. Therefore, to achieve the same charging efficiency as a single battery, the charging current should be the sum of the currents of the n lithium batteries combined into the battery pack. According to Ohm's Law formula I=U/R, this design is reasonable. However, the internal resistance of parallel-connected batteries also changes. According to the parallel internal resistance formula, the total internal resistance of two parallel-connected lithium batteries equals the product of their internal resistances divided by the sum of their internal resistances. It decreases as the number of parallel batteries increases. Therefore, it is possible to achieve efficient parallel charging of lithium batteries with a current less than the sum of the currents of n parallel-connected lithium batteries.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.