···
Log in / Register

What is the tire model specification for the Mercedes-Benz E300?

4 Answers
EvelynLynn
07/30/25 12:26am

The tire model specification for the Mercedes-Benz E300 is 245/45R18. The first number, 245, represents the tire width of 245MM. The number 45 indicates the aspect ratio of the tire's cross-section is 45%, meaning the height of the cross-section is 45% of the width. The number 18 represents the rim diameter of 18 inches, and the letter "R" in the middle stands for radial tire. The Mercedes-Benz E300 uses Bridgestone TURANZA run-flat tires, with five-spoke hollow-designed rims. None of the models come with a spare tire as standard. If you want to replace the tires yourself, you can follow the steps below: Take out the spare tire and the jack, place the jack under the frame of the tire you want to replace, ensuring the jack touches the metal part of the frame. Raise the jack until it supports the car. The jack should be positioned under the vehicle, and you should check to ensure the jack is at a right angle to the ground. Remove the hubcap and loosen the nuts counterclockwise. Do not completely remove the nuts; just loosen them enough to eliminate resistance. When loosening the nuts for the first time, keeping the tire on the ground ensures that the nuts, not the tire, are turning. Continue turning the nuts counterclockwise until they are loose. Repeat this step for all lug nuts and then remove them completely. Place the new tire on the rim, carefully aligning the tire rim with the wheel bolts. Install the lug nuts and tighten them by hand until all nuts are concealed. At this point, the tire replacement is complete. In addition to the model, the tire also carries the following common data: Tire cord material: Indicated by Chinese pinyin, such as M for cotton cord, R for rayon cord, N for nylon cord, G for steel cord, and ZG for steel radial cord tires. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under defined conditions. Letters from A to Z represent certified speed ratings from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h. Rim specification: Indicates the rim specification compatible with the tire for practical use, such as standard rim 5.00F.

Was this review help?
6
3
Share
McAdriel
08/16/25 4:59am

The original tire specification for the Mercedes-Benz E300 is typically 245/45 R18. This series of numbers indicates that the tire width is 245 millimeters, the aspect ratio is 45%, and the rim diameter is 18 inches. I understand the importance of these parameters as they directly affect the vehicle's handling stability, grip, and fuel efficiency. If the specifications do not match, such as a width that is too narrow or a height that is too low, issues like side slipping or delayed steering may occur during high-speed driving. It is recommended that owners regularly check tire pressure and wear, maintaining inflation at the recommended level to extend tire life. Considering all-season tires that adapt to different seasons is also a good choice, ensuring reliable performance in both dry and wet conditions. Remember to consult a professional when replacing tires to ensure compatibility and avoid affecting the overall driving experience.

Was this review help?
15
1
Share
Expand All
AdrielAnn
10/19/25 7:56am

I've been driving a Mercedes-Benz E300 for a while, and it comes with standard 245/45 R18 tires. The design of these tires makes daily driving smooth, not too stiff but providing good support during turns. If the specifications aren't chosen correctly, the car may feel unstable on bumpy roads and could increase noise interference. I make it a habit to check the tread depth every two months by inserting a coin into the grooves—if the edge is visible, it's time to replace them. Additionally, original recommended brands like Continental or Michelin offer a good balance, ensuring safety without sacrificing comfort. In the long run, regular tire rotation helps balance wear, saving both money and hassle. In short, choosing the right specifications may seem minor but is crucial.

Was this review help?
1
1
Share
Expand All
OKira
12/02/25 8:34am

As a car enthusiast, the Mercedes E300's standard 245/45 R18 tires are a great starting point—sufficient width for a sporty feel without being harsh. When modifying, upgrading to larger sizes can enhance the sporty vibe, but be careful not to rub the wheel arches. Choosing tires isn't just about size; performance specs like the speed rating (Y-rated) are crucial for solid grip at high speeds. Factor in weather: opt for anti-slip winter tires in the north, and prioritize wet-grip tires in the south. Don’t just chase cool brands—practicality and safety come first. Simply put, the right tires add a layer of driving joy.

Was this review help?
8
0
Share
Expand All
More Forum Discussions

What is the method to reset the maintenance light on a Mercedes-Benz E260?

Solution to reset the maintenance light on a Mercedes-Benz E260: 1. First, close the engine hood. Open the engine hood to a vertical position, then close it again. Ensure all doors and the trunk lid are closed. Insert the key into the ignition switch and turn it to the first position. Use the up and down page buttons on the left side of the steering wheel to navigate to the "Odometer" (i.e., display the total mileage) on the multifunction display. 2. Next, use the left and right page buttons to navigate to the "Trip" option, which will be displayed for 5 seconds. Press and hold the "Answer Call" button, then within 1 second, press and hold the "OK" button, and keep both pressed for 5 seconds. The multifunction display will show the workshop menu with options such as "Vehicle Data," "Roller Test," and "ASSYST PLUS." Select "ASSYST PLUS" and confirm by pressing the "OK" button. 3. Finally, the multifunction display will show options like "Service Data" and "Full Service." Confirm the relevant maintenance data.
2
3
Share

Where is the air conditioning filter of the new Peugeot 308 located?

The air conditioning filter of the new Peugeot 308 is located in the engine compartment, above the right front wheel. Be cautious of the working area's temperature to avoid burns from high heat. Steps to replace the air conditioning filter: 1. First, remove the soundproofing cotton. You can use a flat-head screwdriver to pry open the clips and take out the soundproofing cotton; 2. Open the cover of the air conditioning filter, pull out the old filter, and install the new one; 3. Replace the cover and restore the soundproofing cotton. The clips can be snapped back into place by hand. The new Peugeot 308 is a compact sedan under the Peugeot brand. This model is equipped with three types of engines: a low-power version 1.2-liter turbocharged engine, a high-power version 1.2-liter turbocharged engine, and a 1.6-liter naturally aspirated engine. Its front suspension uses a MacPherson independent suspension, and the rear suspension employs a torsion beam non-independent suspension.
3
1
Share

What are the body dimensions of the 2019 Camry?

2019 Camry has a length, width, and height of 4885mm, 1840mm, and 1455mm respectively, with a wheelbase of 2825mm. Below is some extended information about the 2019 Camry: 1. The 2019 Camry is the eighth-generation model of the Camry, launched in October 2018, and is one of the 'Japanese Big Three,' alongside the Accord and the Teana. 2. In terms of appearance, the 2019 Camry has a high level of recognition, featuring dual design styles: Luxury and Sport, both derived from the latest family 'Keen-Look' design language. The Luxury version's front grille adopts an oversized trapezoidal horizontal bar grille, almost covering the entire front face, with smoother body lines, a lower waistline, and increased rear cabin height. The Sport version features a three-layer grille front face, introduces a dual-tone body design for the first time, and adopts a dual-side quad-exhaust system, significantly enhancing its sporty appeal.
3
4
Share

What is the actual fuel consumption of the Baojun 310 1.2L model?

The actual fuel consumption of the Baojun 310 1.2L model is 5.3-5.4L/100km. The fuel consumption of a car is influenced by many factors. In addition to the various factors of the vehicle itself, the driver's driving habits and external weather, road conditions, and other factors also have a crucial impact on fuel consumption. Here are some methods to reduce fuel consumption: 1. Check the air conditioning system in summer. Air conditioning malfunctions are a significant cause of high fuel consumption. Poor cooling performance will require higher fan speeds and lower temperatures to achieve a cooling effect. 2. Frequent hard braking. Frequent hard braking is the main reason for high car fuel consumption. While ensuring safe driving, make full use of the vehicle's inertia. 3. Avoid turning on the air conditioning too aggressively in small-displacement vehicles. For vehicles exposed to the sun, do not turn on the air conditioning immediately after getting in. First, open the windows and set the fan to a higher setting without turning on the air conditioning to expel the hot air inside. After the vehicle has cooled down moderately, then turn on the air conditioning.
1
0
Share

Can a car that uses 95-octane gasoline be filled with 92-octane?

95-octane cars must not use 92-octane gasoline for a long time, and the reasons are as follows: 1. The biggest difference between 92-octane and 95-octane gasoline is the different octane value in the gasoline, and the higher the octane value, the stronger the anti-knock property of the gasoline. 2. Generally, a car engine has a specified compression ratio, and the corresponding gasoline model can be selected through the compression ratio. A compression ratio of 8-10 uses 92-octane gasoline, and a ratio above 10 uses 95-octane gasoline. 3. If a high-compression engine uses 92-octane gasoline, premature combustion (knocking) at the wrong time will cause engine knocking. This can lead to unstable idling, reduced power, increased fuel consumption, and in severe cases, may even cause engine valve bending or damage to the throttle body cover. Therefore, 95-octane cars must not use 92-octane gasoline for a long time, unless the vehicle runs out of fuel halfway.
10
0
Share

How many seats does the Rolls-Royce Cullinan have?

The Rolls-Royce Cullinan is available in both four-seat and five-seat versions. It is Rolls-Royce's first luxury SUV model. This vehicle is equipped with a 6.7-liter twin-turbocharged V12 engine across all variants. The Rolls-Royce Cullinan has a wheelbase of 3295 mm, with length, width, and height measuring 5341 mm, 2000 mm, and 1837 mm respectively. Below are the relevant details about the Rolls-Royce Cullinan: 1. Engine Specifications: The Rolls-Royce Cullinan's 6.7-liter twin-turbocharged V12 engine, codenamed N74B68A, delivers a maximum power output of 420 kW and a peak torque of 850 Nm. This engine reaches its maximum torque at 1600 rpm and achieves its maximum power at 5000 rpm. It features direct fuel injection technology and utilizes an aluminum alloy cylinder head and block. 2. Design Features: The Rolls-Royce Cullinan employs double-wishbone independent suspension systems for both front and rear axles. This suspension setup enhances the vehicle's ride comfort and driving dynamics.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.