What is the tire model specification for the BMW X4?

2 Answers
JaxonMarie
07/24/25 3:44am
The tire model for the BMW X4 is 245/45R20. The first number, 245, represents the tire width of 245MM. The 45 indicates the tire's aspect ratio is 45%, meaning the section height is 45% of the width. The letter R stands for radial tire, and 20 denotes the rim diameter of 20 inches. The BMW X4 has a top speed of 260km/h, accelerates from 0 to 100km/h in 6.35 seconds, and has a fuel consumption of 8.6L per 100km. In addition to the model, the tire also carries the following common data: Tire cord material: Indicated by Chinese pinyin, such as M for cotton cord, R for rayon cord, N for nylon cord, G for steel cord, and ZG for steel radial cord tire. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters from A to Z represent certified speed ratings from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h. Rim specification: Indicates the rim size compatible with the tire for practical use, such as "Standard Rim 5.00F".
Was this review help?
9
3
Share
LaCarmen
08/10/25 11:21pm
As a BMW X4 owner for several years, I must say tire specifications are crucial. The standard configuration is usually 245/45 R20, meaning a width of 245mm, aspect ratio of 45%, mounted on 20-inch wheels, but this may vary by year or trim level. For example, the base model might use 245/50 R18, while the top-tier M version could come with 255/40 R21. Choosing the correct size is vital as it affects steering stability, braking efficiency, and fuel consumption. Arbitrarily changing tire width or wheel size may increase suspension load or cause safety system errors. I always check the label on the driver's side door frame or refer to the owner's manual to confirm the exact model. Run-flat tires are common in BMWs, but selecting a matching specification from reputable brands can enhance comfort. Remember, tires are the only contact point between your car and the road, so regularly checking tire pressure and tread depth helps prevent accidents and ensures safe daily commutes.
Was this review help?
8
4
Share
Expand All
More Forum Discussions

How to Adjust the Audio Equalizer of Geely Binyue?

The specific adjustment method for the Geely Binyue audio equalizer is as follows: 1. Appropriately reduce the four frequency bands of 125Hz-1db, 250Hz-2db, 500Hz-2db, and 1kHz-2db to enhance the clarity of the music. 2. Appropriately increase the two frequency bands of 2kHz-1db and 4kHz-0db to add a sense of presence. 3. Appropriately increase 8kHz+1db to improve the loudness of the sound, but excessive adjustment may cause vocal sibilance. 4. Appropriately increase 16kHz+2db to extend the treble, making the music sound more pleasant.
16
5
Share

How to Fold Down the Rear Seats in a Mazda6?

The rear seat backrest of the Mazda6 is controlled by a latch, with the release switch located beside the seat. Only by pulling the switch to unlock the latch can the rear seats be folded down. The specific steps to fold down the rear seats of a Mazda6 are as follows: 1. Open the driver's door of the Mazda6. 2. Pull up the handbrake of the Mazda6. 3. Open the rear door of the Mazda6. 4. Use your hand to pull the rear seat backrest release switch of the Mazda6. 5. Gently push forward to fold down the rear seats. Note: Ensure there are no children or objects on the rear seats during the operation.
18
1
Share

How to Reset the Maintenance Light on a 2019 Honda Lingpai?

The purpose of the maintenance light is to remind the owner to perform timely maintenance. After maintenance is completed, the vehicle's maintenance light should be reset. The specific steps to reset the maintenance light on a 2019 Honda Lingpai are as follows: 1. With the power on, the dashboard lights up. 2. Briefly press the reset button to open the maintenance reminder interface. 3. Press and hold the reset button for about 20-30 seconds, then release when the maintenance mileage starts flashing. 4. Press and hold the reset button for another 20-30 seconds until the maintenance mileage resets to ellipsis. 5. The Lingpai maintenance light reset is now complete.
13
5
Share

How to Replace the Battery in a Roewe Key?

Roewe key replacement battery specific operation steps are as follows: 1. Take out the key and press the silver-white button on the top of the key to pop out the mechanical key. 2. After the key pops out, use a flat screwdriver to pry open the side buckle. Be careful not to use too much force when prying to avoid damaging the key. 3. After a gap appears, gently pry open the cover of the car key. 4. After opening, the key will be divided into two parts. One part is the battery, and the other is the rubber pad that protects the battery. 5. Remove the old battery and replace it with a new one. 6. Finally, cover the lid back.
6
3
Share

What are the differences between the 2021 Buick Excelle facelift and non-facelift models?

Buick Excelle is a compact car under the Buick brand. The main differences between the 2021 Excelle facelift and non-facelift models are as follows: 1. Different configurations: The facelifted Excelle is equipped with a USB interface, while the non-facelift model does not have a USB interface. 2. Different functions: The facelift adds two functions, one is cruise control, and the other is the use of a multifunction steering wheel. The interior no longer has the previous beige color scheme; the new 2021 Excelle adopts two interior design options: all-black and gray-black. There are no differences in other configurations, and the exterior materials remain unchanged. 3. Different transmissions: The facelift features two new functions in its configuration. When purchasing the Excelle, the main considerations are whether the cruise control function and multifunction steering wheel are helpful for driving.
3
0
Share

What Causes BMW's Unstable Idle Speed Fluctuation?

BMW's unstable idle speed fluctuation can be attributed to the following reasons: 1. Intake pipe leakage. The intake system contains numerous intake manifolds or various valves, and any leakage can allow unwanted air to enter, causing the air-fuel mixture in the intake manifold to become either too rich or too lean, ultimately leading to unstable or fluctuating idle speed. 2. Fuel system blockage or malfunction. Blockages in the fuel tank vent hole, fuel tank switch, fuel filter, or the fuel line between the tank and the carburetor can prevent the engine from receiving the required amount of fuel during idle, resulting in a lean mixture and unstable idle speed. 3. Idle control valve failure. The idle operation of electronically fuel-injected engines is mostly controlled by the idle control valve. A malfunction can cause uneven air distribution, leading to fluctuating power output at idle. 4. Carbon buildup. Excessive carbon deposits inside the engine can reduce ignition energy and intake efficiency, ultimately causing unstable power output, idle speed fluctuations, and poor acceleration. 5. Cold start. During a cold start, the engine injects more fuel, resulting in a higher idle speed, especially after prolonged inactivity or in cold environments. The idle speed will return to normal once the engine warms up.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.