What is the tire model of the Prado?

1 Answers
LeDallas
07/29/25 10:54pm
265/60R18 is the tire model specification for the Prado. The first number, 265, represents the tire width of 265MM. The number 60 indicates that the tire's aspect ratio is 60%, meaning the section height is 60% of the width. The number 18 represents the rim diameter of 18 inches. The middle letter or symbol has a special meaning: "R" stands for radial tire. The tire brand for the Prado is Dunlop, with the tire center featuring a high-rigidity tread design, and the spare tire is full-sized. If you want to replace the tire yourself, you can follow the steps below: Take out the spare tire and jack, place the jack under the vehicle frame near the tire to be replaced, ensuring the jack touches the metal part of the frame. Raise the jack until it supports the car. The jack should be positioned under the vehicle, and you should check to ensure the jack is at a right angle to the ground. Remove the hub cap and loosen the nuts counterclockwise. Do not fully remove the nuts; just loosen them enough to eliminate resistance. When loosening the nuts for the first time, keeping the tire on the ground ensures that the nuts turn, not the tire. Turn the nuts counterclockwise until they are loose. Repeat this step for all lug nuts and then remove them completely. Place the new tire on the wheel hub, carefully aligning the tire rim with the wheel bolts. Install the lug nuts and tighten them by hand until all nuts are snug. At this point, the tire replacement is complete. In addition to the model, the tire also displays the following common data: Tire cord material: Indicated by Chinese pinyin, such as M for cotton cord, R for rayon cord, N for nylon cord, G for steel cord, and ZG for steel radial cord tire. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under defined conditions. Letters from A to Z represent certified speed ratings from 4.8 km/h to 300 km/h. Common speed ratings include: Q: 160 km/h; H: 210 km/h; V: 240 km/h; W: 270 km/h; Y: 300 km/h. Rim specification: Indicates the rim specification compatible with the tire for practical use, such as standard rim 5.00F.
Was this review help?
9
3
Share
More Forum Discussions

What procedures are required to reissue a vehicle green book?

If the motor vehicle is personally owned, the required documents or procedures include the original and photocopy of the ID card, the motor vehicle driving license. For temporary residents, a residence certificate and its photocopy are needed. If the motor vehicle is owned by an organization, the original organization code certificate, the original ID card of the agent, and a written authorization from the motor vehicle owner are required. Below is the relevant introduction: Green Book: The vehicle registration certificate is commonly referred to as the "Big Green Book" of the car. The vehicle registration certificate, known as the "Big Green Book," is the legal proof of vehicle ownership, equivalent to the car's household registration book. Notes: If the car is purchased in full payment, the motor vehicle registration certificate will be obtained after the purchase. If the car is bought with a loan, the registration certificate can only be obtained after the loan is fully repaid.
20
2
Share

Is there a subsidy for vehicles scrapped upon reaching the age limit?

According to the "Motor Vehicle Registration Regulations" and relevant laws and regulations, there are subsidies for scrapping. The standards are as follows: 1. Scrapping heavy-duty trucks: a subsidy of 18,000 yuan per vehicle. 2. Scrapping medium-duty trucks: a subsidy of 13,000 yuan per vehicle. 3. Scrapping light-duty trucks: a subsidy of 9,000 yuan per vehicle. 4. Scrapping mini trucks: a subsidy of 6,000 yuan per vehicle. 5. Scrapping large passenger vehicles: a subsidy of 18,000 yuan per vehicle. The following is a related introduction: The motor vehicle scrapping system: It is one of the important systems in China's motor vehicle management, which is conducive to ensuring the quality and safety of motor vehicles. This is one of the specific manifestations of safeguarding the legitimate rights and interests of the people in public transportation.
16
0
Share

What documents are required for reissuing a vehicle registration certificate?

Reissuing a vehicle registration certificate requires the following documents: "Motor Vehicle License Plate and Certificate Application Form"; the original and a copy of the identity proof of the vehicle owner; and the "Motor Vehicle Inspection Record Form". To apply for a replacement vehicle registration certificate, the vehicle owner must drive the vehicle to the vehicle management office. The scope of investigation for vehicle registration certificates includes: changing the model of the motor vehicle: altering the brand, model, and engine type of the motor vehicle, except for engines that are optionally installed with the permission of the competent department of motor vehicle products under the State Council; changing the appearance of the motor vehicle: modifying the registered appearance and relevant technical data of the motor vehicle, unless otherwise stipulated by laws, regulations, and national mandatory standards; moving out: when the vehicle owner's residence moves out of the city, it involves traffic safety violations and accident handling related to the motor vehicle; other circumstances: the proofs and vouchers submitted by the vehicle owner or agent are invalid; the motor vehicle has reached the mandatory scrapping standard stipulated by the state; the motor vehicle is sealed or seized by the People's Court, People's Procuratorate, or administrative law enforcement departments according to the law.
19
0
Share

What is the fuel consumption of a 9.6-meter truck?

9.6-meter truck fuel consumption when fully loaded is approximately between 28 to 35 liters per 100 kilometers. Below is an introduction related to 9.6-meter trucks: 1. Fuel consumption: (1) Fuel consumption depends on the driver's driving habits and road conditions. If driving on highways with high average speeds, the vehicle will be more fuel-efficient. If driving on difficult mountainous roads, fuel consumption will be higher. (2) The truck's fuel consumption depends on the weight of the cargo. Overloading not only increases fuel consumption but also damages the vehicle and is not conducive to driving safety. 2. Hazards of overloading: (1) It increases the burden on the engine and transmission system. Long-term overloading can reduce the lifespan of the engine and transmission system. (2) It can cause metal fatigue in the truck frame, and in severe cases, may lead to fractures or deformation. (3) It can extend the braking distance, potentially causing serious traffic accidents in emergency situations.
2
1
Share

What Are the Reasons for Failing to Schedule Subject One Exam?

Here are two common reasons for failing to schedule the Subject One exam: 1. High demand: There are too many people scheduling the Subject One exam, making it impossible to secure a spot based on the ranking rules; 2. Insufficient training hours: To schedule the Subject One exam, you must complete the required training hours. Otherwise, you will receive a prompt stating "No training completed, exam scheduling not allowed." Below is additional information on the Subject One exam scheduling ranking rules: 1. First-time scheduling: For first-time scheduling of the Subject One exam, the ranking is based on the time when the user initially applied for a motor vehicle driver's license; 2. Non-first-time scheduling: For non-first-time scheduling of the Subject One exam, the ranking is based on the time of the last exam taken; 3. Cancellation due to personal reasons: If a user cancels a successfully scheduled exam due to personal reasons, the ranking is based on the cancellation time.
11
0
Share

What is the optimal idle speed for a car?

The optimal idle speed for a car is between 800-900 RPM. Below is relevant information about car idle speed: 1. Situations where idle speed automatically increases by 50-150 RPM: (1) Cold start with low coolant temperature. (2) Battery power deficiency. (3) Air conditioning cooling operation. 2. Hazards of unstable car idle speed: (1) If car idle speed is too high, check for loose or leaking intake manifold, which will significantly increase fuel costs and accelerate engine carbon buildup. (2) If car idle speed is too low, there's a safety risk of sudden stalling while driving. (3) Fluctuating idle speed may indicate non-functioning spark plugs or ignition coils, causing engine piston malfunction and severe vibration.
2
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.