What is the tire model of the Haval M6 Plus?
3 Answers
The tire model specification of the Haval M6 is a 17-inch aluminum alloy wheel, paired with Cooper Discoverer Hts tires, with a size of 225/65R17. These tires focus on comfort, feature high-gloss polishing, and have a very sporty wheel design. Methods to distinguish tires: The model of a tire can be identified based on the data on the side of the car tire. Generally, the side of the tire will indicate the tire's width, aspect ratio, tire type, and the applicable size. When purchasing tires, observe your tire's data before making a purchase. Meaning of tire models: On the side of the tire, there will be a series of numbers. These numbers are separated, and usually, the first three digits indicate the width of the car tire. Typically, the width of the tire ranges between 145 and 285. Additionally, different car displacements may also lead to the use of different tire specifications.
My family drives a Haval M6 Plus 2021 model, which originally came with 225/65 R17 tires. The ride is quite smooth, and the grip is sufficient for both city roads and highways. After driving over 30,000 kilometers, the tire treads were nearly worn out, prompting a tire replacement. It's crucial to regularly check and maintain tire pressure at around 2.4 bar, especially during the hot summer months when the risk of blowouts increases. I recommend rotating the tires every 10,000 kilometers to extend their lifespan to about 4 years or 50,000 kilometers. When replacing the tires, I opted for Michelin—slightly more expensive but safe and reliable. Replacing them with the original model was straightforward; just remember not to buy expired products, as safety comes first.
As someone familiar with car maintenance, the tire specifications for the Haval M6 Plus are 225/65 R17. The 225 represents the width in millimeters, 65 is the aspect ratio, R indicates a radial structure, and 17 inches refers to the wheel size. This size is suitable for daily driving, balancing comfort and fuel efficiency. I emphasize that the load index is 102T, with a maximum speed of 180 km/h, meeting safety standards. For maintenance, pay attention to the tread depth; below 1.6 mm poses a high risk of slipping and loss of control. It is recommended to use an electronic tire pressure gauge for monthly checks, avoid overloading or sharp turns to extend tire life. When replacing tires, choose the original factory specifications to maintain balanced performance.
