What is the tire model of the Fengguang 580?

2 Answers
DeSkylar
07/29/25 3:50am
The Fengguang 580 has two tire models: one is 225/60r17, and the other is 225/55r18. It is normal for different configurations of the same model to use tires of different sizes, as higher-end configurations often use larger tires. The Fengguang 580 is an SUV under Dongfeng, featuring a wheelbase of 2780mm and a body length of 4690mm, offering flexible and spacious interiors with 5-seat and 7-seat options to meet diverse travel needs. The Dongfeng Fengguang has a 2+3+2 seating layout, equipped with matrix-style full LED headlights, full LED fluid dynamic taillights, an electric panoramic sunroof, flexible sliding and folding second-row seats, and a surround-style center console with a 3D screen.
Was this review help?
19
4
Share
SanArabella
08/12/25 7:38am
I've been driving the Fengguang 580 for several years and always pay attention to tire details. The original factory standard model is 215/60 R17, which means a width of 215 millimeters, an aspect ratio of 60%, and fits a 17-inch wheel hub. Different versions may have slight variations, such as the high-end version sometimes using a larger 215/55 R18, but the mainstream is still this one. The tire model is clearly written on the label on the door frame, and I take a look every time I wash the car. After long-term use, it is recommended to choose wear-resistant brands such as Michelin, which are more stable on the highway. Regular tire pressure checks are important, keeping it around 220kPa. If it's too high, it can cause bumpiness, and if it's too low, it increases fuel consumption. Tires are the core of driving safety, so when replacing tires, be sure to match the original factory specifications. Don't be tempted by cheap alternatives or make random modifications, as this can affect handling. If you can't remember, take a photo and save it for shopping reference.
Was this review help?
12
2
Share
Expand All
More Forum Discussions

How to Start an Automatic Transmission Car Without a Clutch?

To start an automatic transmission car without a clutch, follow these steps: 1. Press the brake pedal; 2. Engage the handbrake; 3. Shift to N (Neutral) gear and start the ignition; 4. Release the handbrake; 5. Release the brake pedal; 6. Press the accelerator; 7. Start moving. When waiting at a red light or for a short stop, the correct parking method is to engage the handbrake and shift to N gear, not P (Park) gear, and definitely not to keep the gear in D (Drive) while holding the brake pedal for a long time. An automatic transmission eliminates the need for the driver to manually shift gears, as the vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. Driving an automatic transmission car primarily involves using P (Park) gear, R (Reverse) gear, N (Neutral) gear, and D (Drive) gear, which are sufficient for general driving needs. However, in some special driving conditions, other functional gears may be required.
20
1
Share

What is the tire specification for the Mercedes GLC43?

The tire specification for the Mercedes GLC43 is 255/40R21. Tire Introduction: Tires are circular elastic rubber products mounted on various vehicles or machinery to roll on the ground. Typically installed on metal rims, tires support the vehicle body, cushion external impacts, ensure contact with the road surface, and maintain driving performance. Tire Performance: Tires are often used under complex and demanding conditions, enduring various deformations, loads, forces, and temperature extremes during operation. Therefore, they must possess high load-bearing capacity, traction performance, and cushioning ability. Additionally, they require high wear resistance, flexibility, and low rolling resistance with minimal heat generation. Half of the world's rubber consumption is used for tire production, highlighting the significant demand for rubber in tire manufacturing. Tire Specifications: Specifications represent the geometric parameters and physical performance indicators of a tire. Tire specifications are commonly expressed as a set of numbers, where the first number indicates the tire section width and the second number denotes the rim diameter, both measured in inches.
18
4
Share

How Many Seconds Can the Clutch Be Depressed in Subject 3?

When the clutch is fully depressed in Subject 3, it should not exceed 5 seconds. The clutch should not remain in the semi-engaged state for more than 15 seconds. Here are detailed instructions on how to operate the clutch in Subject 3: Correct method of operating the clutch in Subject 3: Press the clutch firmly with the toes while keeping the heel off the ground. After shifting into first gear, slowly retract and lift the entire leg, gradually releasing the clutch to the semi-engaged state. The clutch will then slide from the toes to the arch of the foot, at which point the heel can touch the ground. Precautions for the clutch in Subject 3: When starting in 1st or 2nd gear, the clutch should be released slowly to avoid stalling due to improper engagement. However, the clutch and throttle should not be pressed simultaneously. When shifting gears, fully release the throttle before immediately pressing the clutch pedal. The shifting action can be slightly slower, and then gradually release the clutch. After fully releasing the clutch, gently press the throttle to accelerate.
14
4
Share

How to Deal with Water in the Car Exhaust Pipe?

If water enters the car exhaust pipe, you can go to a 4S shop for a simple cleaning and drying, which will allow the engine to function normally again. The repair cost is relatively low, usually just a few hundred yuan to solve the problem. If the water is shallow and the situation is not severe, you can also check the electronic systems and whether there is any water accumulation under the car body by yourself. If you must start the engine, remove the spark plugs first to drain some water from the engine, then reinstall them before continuing to start. Methods to remove water from the car exhaust pipe are as follows: 1. If water enters the car exhaust pipe and the engine stalls, do not attempt to force a restart. Instead, call for rescue services immediately. 2. At a 4S shop, after a simple cleaning and drying, the engine can resume normal operation. 3. If the water is shallow and the situation is not severe, you can inspect the electronic systems and check for water accumulation under the car body by yourself. If you must start the engine, remove the spark plugs first to drain some water from the engine, then reinstall them before continuing to start. This can help avoid stalling.
3
0
Share

What is the real range of the Leapmotor T03?

The real range of the Leapmotor T03 is 403km. The Leapmotor T03 adopts high-performance NCM811 ratio battery cells and is also equipped with an energy recovery system, which can further increase the range. The charging port is located under the logo cover on the front of the car, with a maximum fast-charging power of 55kW, allowing the battery to charge from 30% to 80% in 30 minutes. Here are some relevant details: 1. In terms of power performance, the Leapmotor T03 is equipped with the Heracles electric drive system independently developed by Leapmotor, with a maximum power of 55 kW and a maximum torque of 155 N·m. The 0-50km/h acceleration time is only 5 seconds, and the top speed can reach 110km/h. It offers three driving modes: Economy, Standard, and Sport. Even in Standard mode, the acceleration is sufficiently brisk, and overtaking and lane changing are quite effortless. 2. Additionally, the chassis feels quite solid, and the overall steering is smooth. For example, when driving over an overpass, the chassis tracking is very stable, and the feedback from the chassis to the steering wheel is also quite clear.
1
4
Share

Why Does the Fuel Needle on the Car Dashboard Swing Back and Forth?

The reason why the fuel needle on the car dashboard swings back and forth may be due to a malfunction in the fuel level sensor. It is recommended to visit a 4S shop for inspection and repair as soon as possible. Below is some information about the car dashboard: 1. The car dashboard is a device that reflects the working conditions of various vehicle systems. 2. Common indicators include the fuel indicator, washer fluid indicator, electronic throttle indicator, front and rear fog light indicators, and warning lights. Additional Information: 1. The car fuel level sensor can float on the surface of the fuel layer. Using the lever principle, the other end of the float is connected to a potentiometer. The amount of fuel determines the height of the float, and the potentiometer at the other end will reach different potentials based on the fuel level, which is then displayed on the dashboard. 2. The principle of the car fuel level sensor is based on a wire-wound resistor. The resistivity is determined by the material of the resistance wire, and the resistance value is determined by the material's resistivity and the number of coil turns.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.