What is the tire model of the Elysion?
1 Answers
The tire model specification for the Elysion is a non-full-size 225/50R18. Among the five Elysion models—2.0Le:HEV Supreme Edition, Luxury Edition, Luxury First Edition, Comfort Edition, and Classic Edition—all use this tire. The tire model 225/50R18: The first number 225 represents the tire width of 225MM, 50 indicates the aspect ratio of the tire section is 50%, meaning the section height is 50% of the width, and 18 represents the rim diameter of 18 inches. The middle letters or symbols have special meanings: "X" denotes high-pressure tires; "R" and "Z" denote radial tires; "—" denotes low-pressure tires. Besides the model, the tire also carries the following common data: Tire carcass ply material: Represented by Chinese pinyin, such as M-cotton ply, R-rayon ply, N-nylon ply, G-steel ply, ZG-steel radial ply tires. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under defined conditions. Letters A to Z represent certified speed ratings from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: Indicates the rim specification compatible with the tire for practical use, e.g., standard rim 5.00F. For the Elysion's tires in daily use, pay attention to the following points: Regularly check the tire surface for cracks, deformations, or other defects. Due to driving wear, the tread grooves gradually become shallow. If the tread wears out, it will lose its drainage and anti-slip functions, significantly reducing the car's performance. Small cracks can be hidden dangers for tire bursts at high speeds. Additionally, promptly remove pebbles from the grooves. Park on level ground whenever possible. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials related to rubber deterioration. After parking, the driver should not turn the steering wheel, as this accelerates tire wear. Do not splash water for cooling. In hot weather or during high-speed driving, tires are prone to overheating, and the pressure increases. In such cases, park to dissipate heat, strictly avoid deflating to reduce pressure or splashing water for cooling, to prevent abnormal aging of the tread rubber. Avoid sudden braking. Try to minimize frequent use of brakes and sudden stops to prevent accelerated tread wear due to dragging between the tire and the ground.
