What is the tire model of Chery Tiggo 3?

1 Answers
Ronnie
07/25/25 5:06am
Chery Tiggo 3's tire model is 215/60R17, where 215 represents the tread width of 215mm, 60 indicates the aspect ratio of the tire, R stands for radial construction, and 17 denotes the inner diameter of the tire as 17 inches. Taking the 2020 Chery Tiggo 3 as an example, its body dimensions are: length 4420mm, width 1760mm, height 1670mm, with a wheelbase of 2510mm and a fuel tank capacity of 55 liters. The 2020 Tiggo 3 is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 116hp and a maximum torque of 143Nm, paired with a 5-speed manual transmission.
Was this review help?
7
5
Share
More Forum Discussions

What causes the clutch not to return and failure to engage gears?

When encountering the issue of the clutch pedal not springing back and failure to engage gears, there are mainly two causes: either the clutch return spring has detached or broken, or the clutch pedal itself is fractured. Below is an explanation of the clutch failure to return issue: 1. The clutch's rebound action is achieved by the return spring. When the clutch return spring detaches or breaks, the clutch cannot rebound. As long as the pedal doesn't return, the engine power cannot be transmitted to the transmission, resulting in loss of vehicle power. In such cases, simply replacing the clutch return spring will resolve the issue. 2. A fractured clutch pedal will prevent the pressure applied by the driver from being transmitted to the transmission. In this situation, replacing the entire clutch assembly is required to fix the problem. Additional information on dealing with clutch disengagement failure: When clutch disengagement failure severely affects normal vehicle operation, the best solution is to call for towing service. If the issue is solely a broken clutch return spring, only the spring needs replacement without the need to replace the entire clutch assembly. However, if the clutch pedal is damaged, replacement of the clutch pedal assembly is necessary.
14
0
Share

What's the reason for a car not accelerating smoothly and jerking after starting?

If the car is not accelerating smoothly and jerking, check whether the fuel injectors and fuel supply system are faulty. Below is the content about the car not accelerating smoothly with abnormal sounds: 1. If the fuel injectors are faulty, it will cause the car to jerk when accelerating. It is recommended to regularly check whether the fuel injectors are faulty. After long-term use, carbon deposits may occur on the fuel injectors, affecting their normal operation. If the carbon deposits on the fuel injectors are severe, adding fuel additives to the fuel tank can reduce the carbon deposit phenomenon. 2. The main causes of fuel injector failure are fuel and filter issues, such as using inferior diesel, long-term use of the filter element without cleaning or replacement. It is recommended to use fuel that meets national standards and regularly clean the fuel filter to prevent excessive fuel impurities from clogging the fuel injectors.
15
1
Share

Is the Transmission of the Volkswagen T-Roc Dry or Wet Type?

The transmission used in the Volkswagen T-Roc is manufactured by Volkswagen Automatic Transmission (Dalian) Co., Ltd. Volkswagen Automatic Transmission (Dalian) Co., Ltd. (VWATD) is the first wholly-owned subsidiary of Volkswagen Group China. Established on September 24, 2007, the company is located in Dalian and primarily produces the latest dual-clutch automatic transmissions. The Volkswagen T-Roc is equipped with a 7-speed wet dual-clutch transmission. A wet dual-clutch transmission refers to a type where the clutch plates are immersed in transmission fluid. There are two types of dual-clutch transmissions: dry and wet. When using the transmission of the Volkswagen T-Roc in daily driving, the following points should be noted: Do not delay transmission fluid changes for extended periods. Prolonged failure to change the transmission fluid can damage internal components such as bearings and the housing. Avoid coasting in neutral for long durations. While driving manual transmission vehicles, many experienced drivers may coast in neutral, but for automatic transmission vehicles, this can cause overheating and create a noticeable jolt when shifting back to Drive (D). Never shift into Drive (D) or Reverse (R) before the vehicle comes to a complete stop. Many drivers, aiming for smooth operation, shift into reverse while the vehicle is still moving, which can cause significant damage to the transmission gears and lead to issues like gear grinding over time. Avoid frequently climbing steep slopes in Drive (D). Automatic transmission vehicles may overheat under high loads or shift prematurely, resulting in insufficient power for climbing. In such cases, using manual mode to lock in lower gears or switching to sport mode can help protect the transmission. Do not tow the vehicle over long distances. If an automatic transmission vehicle breaks down, it should be transported using a flatbed tow truck with the transmission in Neutral (N). Towing with a rope or directly dragging the vehicle is not recommended.
15
3
Share

How to Identify Car Tire Models

Tire models can generally be found on the sidewall of the tire. For example, a tire model might be 205/60R16. The first number, 205, indicates that the tire width is 205MM. The number 60 represents the aspect ratio of the tire's cross-section, which is 60%, meaning the height of the cross-section is 60% of the width. The letter R stands for radial tire, and 16 indicates the rim diameter is 16 inches. In addition to the model, tires also display the following common data: Tire cord material: Represented by Chinese pinyin, such as M for cotton cord fabric, R for rayon cord fabric, N for nylon cord fabric, G for steel cord fabric, and ZG for steel radial cord fabric tire. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under defined conditions. Letters from A to Z represent certified speed ratings ranging from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h. Rim specification: Shows the rim size compatible with the tire for practical use, such as "Standard Rim 5.00F".
14
2
Share

What is the minimum ground clearance of the CR-V?

The 2020 CR-V Classic model has a minimum ground clearance of 135MM. Below is detailed information about the 2020 CR-V: 1. The 2020 CR-V is a city classic SUV model produced by Dongfeng Honda. The mid-to-high trim models have a minimum ground clearance of 137MM. Minimum ground clearance refers to the distance between the lowest protruding part of the chassis and the level ground when the vehicle is fully loaded, reflecting the car's ability to pass over obstacles or uneven ground without collision. 2. The 2020 CR-V features a stylish and dynamic exterior with smooth and rounded yet sporty lines. The interior adopts the same LCD instrument panel as the new Civic and a three-spoke multifunction steering wheel. In terms of power, it continues to be equipped with a 1.5T turbocharged engine, delivering a maximum power of 193 horsepower and a peak torque of 243 Nm, paired with a 6-speed manual or CVT continuously variable transmission.
13
0
Share

How to Turn Off the Rear Wiper of Audi Q3?

Audi Q3 rear wiper can be turned off as follows: The wiper switch is located below the right side of the steering wheel. Simply toggle it according to the instructions to turn off the wiper. OFF means off, low means low speed, and high means high speed. You can adjust the wiper speed according to the intensity of the rain. Below is an introduction to the wiper: 1. The wiper assembly includes a motor, reducer, four-bar linkage structure, wiper arm spindle, and wiper blade assembly. When the wiper switch is pressed, the motor starts, and the motor's speed drives the swing arm through the speed reduction and torque increase of the worm gear. The swing arm drives the four-bar linkage, which in turn drives the shaft installed on the front bulkhead to swing left and right. Finally, the shaft drives the wiper blade to sweep the windshield. 2. The power source of the wiper comes from the motor, which is the core of the entire wiper system. The wiper motor adopts a 3-brush structure for easy speed change. The intermittent time is controlled by the intermittent relay, utilizing the motor's return switch contacts and the relay's resistor-capacitor charge-discharge function to make the wiper sweep at a certain interval. 3. Generally, there is a wiper control knob on the car's combination switch handle, with three positions: low speed, high speed, and intermittent.
15
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.