···
Log in / Register

What is the tire model equipped on the Dongfeng Nissan Tiida?

4 Answers
WalterAnn
09/03/25 5:05am
The tire model equipped on the Dongfeng Nissan Tiida is 195/60-R16. Relevant details are as follows: 1. Model upgrade: The new Tiida's tires have seen slight improvements in width and size, upgraded from the previous 185/65-R15 to the current 195/60-R16. The GTS model features even larger tires, reaching 205/50-R17, with the tire style changing to a multi-spoke three-dimensional wheel rim. 2. Low-pressure tires are commonly used in various vehicles: Inflatable tires are divided into two types based on their structure—tubed tires and tubeless tires. Passenger cars generally use tubeless tires. Depending on the arrangement of the tire's cord ply and buffer layer, tires can also be categorized into radial tires and bias tires. Radial tires are widely adopted in automobiles. All tire sidewalls are marked with specifications.
Was this review help?
12
5
Share
LaCole
09/15/25 6:37am
I've been driving my Tiida for several years, and the original tire model is usually 195/60 R16. It provides good grip in rainy weather or on highways, making the drive quite stable. To confirm your car's model is simple; there's a series of numbers on the side of the tire indicating the size and parameters, like 195 representing the tire width in millimeters, 60 being the aspect ratio, and R16 referring to the 16-inch wheel diameter. Nissan chose this model to balance comfort and handling, making long drives less tiring. I regularly check tire pressure and tread depth. In summer, tires are prone to expansion and contraction due to heat, so maintaining tire pressure around 230 kPa can save fuel and reduce wear. If tires are aged or severely worn, refer to the manual to confirm the size when replacing them, and avoid arbitrarily changing to larger wheels which could affect braking performance. Occasionally, even with sudden braking in the rain, there's hardly any slipping, making them quite durable overall.
Was this review help?
19
4
Share
Expand All
VonAlexandra
10/29/25 7:16am
The common tire models for the Tiida are 185/65 R15 or 195/60 R16, depending on the vehicle version. For example, the base model often uses the smaller 185. In the tire specification, the first number 185 indicates the width in millimeters—the larger the number, the more stable the ride, but with slightly higher fuel consumption. The 65 represents the aspect ratio, the height as a percentage of the width—the smaller the number, the sportier the feel, but with reduced comfort. The R stands for radial construction, which provides good elasticity. The 16 is the wheel diameter in inches. Nissan designed the car with a focus on urban driving and fuel efficiency, making the 185 width sufficiently economical and practical. Choosing the wrong size during replacement may lead to inaccurate speedometer readings or ABS failure, so it's essential to refer to the manufacturer's recommended values. When driving on highways, pay attention to noise levels—excessive noise may indicate uneven tire wear.
Was this review help?
12
4
Share
Expand All
RyderFitz
12/12/25 7:28am
The standard tires on the Tiida, like 195/60 R16, are directly related to driving safety when the correct model is used. Incorrect tires can increase braking distance, especially on slippery roads where loss of control is more likely. I always ensure the model matches the original factory specifications and check the tread depth; if it's shallower than 1.6mm, I replace them immediately to reduce the risk of skidding. Regularly inspecting tires for cracks or bulges can prevent blowouts. Nissan chose this size to balance grip and durability, and adding a set of winter tires provides extra peace of mind in winter. Maintenance may seem like a small daily task, but it's a matter of life and death.
Was this review help?
11
1
Share
Expand All
More Forum Discussions

What Causes Shaking After Startup?

Reasons for shaking after startup: 1. Abnormal fuel pump pressure or incorrect readings and poor performance of the intake pressure sensor; 2. Aging engine mounts; 3. Dirty throttle body or excessive carbon buildup in the fuel injectors, leading to an overly lean air-fuel mixture during cold starts; 4. Abnormal engine coolant temperature; 5. Low engine cylinder pressure. Engine maintenance tips: 1. If the vehicle is only driven in urban areas, the air filter may not get clogged, but if driven on dusty roads, pay special attention to cleaning the air filter; 2. Remove sludge from the throttle body; 3. Clean carbon deposits from the fuel injectors, as the combustion chamber is prone to carbon buildup, which can cause starting difficulties. Carbon deposits in the fuel injectors can also lead to clogged fuel passages, distorted fuel spray, and poor atomization.
17
1
Share

How to Set the Time on an Accord 8?

To set the time on an Accord 8: Locate the SOUND button on the center console's audio and air conditioning panel. Below the SOUND button, there is a CLOCK label. Press and hold the SOUND button until you hear a beep, and the time on the LCD display will start flashing. Then, press the 4 button to adjust the hour, the 5 button to adjust the minutes, and the 6 button to reset the minutes to zero. After setting the correct time, press the SOUND button again to confirm, and the time will stop flashing, completing the setup. The Accord 8 has a body length of 4893mm, width of 1862mm, height of 1449mm, and a wheelbase of 2830mm. The car's engine has a maximum power output of 143kW and a maximum torque of 260Nm.
9
3
Share

Is it necessary to break in a new automatic transmission car at high speeds?

Yes, here are the relevant details: Precautions for breaking in a new car at high speeds: Too light or too heavy load: When breaking in a new car at high speeds, it must be done under full load. Otherwise, the effort will be wasted. Therefore, follow the vehicle's full load mass as specified in the manual to gather enough people. If you can't find enough people, you can fill the trunk with items. Running before the first maintenance: Many beginners have little experience in how to break in a car at high speeds and lack knowledge in this area. They often think about taking the car out for high-speed runs shortly after getting it, unaware that this can cause significant harm to the new car. Therefore, breaking in a new car at high speeds should only be done after the first maintenance. This is because, after the first maintenance, all bolt torques and potential issues with fluid levels have been checked and addressed, allowing you to drive with confidence.
6
5
Share

What type of oil is generally used for the first maintenance?

Generally, mineral oil or semi-synthetic oil is used for the first maintenance, and it is recommended to change it every 5,000 kilometers or every six months thereafter. Engine oil, also known as engine lubricant, consists of base oil and additives. It serves multiple functions such as lubrication and wear reduction, auxiliary cooling, sealing to prevent leaks, rust and corrosion prevention, and shock absorption. The first maintenance of a car refers to the initial service after the vehicle leaves the factory. The primary tasks include changing the engine oil and oil filter. During this process, a comprehensive inspection of the vehicle is conducted, which includes checking all lights, fluid levels, functionality of the electrical systems, tire inspection and pressure adjustment, condition of the chassis components, and checking for leaks and proper operation of the engine and transmission.
12
3
Share

What to Do If Your Car Was Hit by an Unknown Party?

Solutions for when your car was hit by an unknown party: 1. If you can locate the other vehicle or the other party has left contact information, directly seek compensation from them, as this type of accident is entirely their fault; 2. If the other vehicle cannot be found, you can only report to the police. This is considered a hit-and-run, and the traffic police will check surveillance footage. If the other vehicle can be identified through surveillance, you can then seek compensation from them. If there is no surveillance and the other vehicle cannot be found, the police will still issue a certificate, which serves as the basis for filing an insurance claim. According to regulations, if the parties involved reach an agreement through private negotiation, the following methods can be used to fulfill compensation for road traffic accident damages: 1. The parties involved compensate on their own; 2. Go to the insurance company where the policy is held or to a road traffic accident insurance claims service location to handle the compensation matters.
20
4
Share

How many liters of fuel does one bar on a car's fuel gauge represent?

One bar on a car's fuel gauge represents approximately 5 liters of fuel, but this can vary depending on the vehicle's fuel tank size. There are two types of fuel gauges: analog and digital. The analog type indicates the fuel level through the position of a needle, with the letters 'E' and 'F' marked on the gauge. 'F' stands for full, while 'E' indicates that the fuel is low. When the fuel icon lights up, it means the remaining fuel is insufficient, and you should refuel as soon as possible. The digital fuel gauge displays the remaining fuel through the number of illuminated bars. More illuminated bars indicate sufficient fuel, while only 1 to 2 bars suggest low fuel levels, requiring timely refueling. Digital fuel gauges also show the estimated driving range, but this is only a reference as it is calculated by the vehicle's computer based on the remaining fuel in the tank.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.