What is the tire model and size of the Great Wall H3?

1 Answers
DiPreston
07/30/25 3:41am
The Great Wall H3 has two tire size models: 235/70R16 and 235/65R17. In 235/70R16, the first number 235 represents the tire width of 235MM, 70 indicates the aspect ratio of the tire section is 70%, meaning the section height is 70% of the width, and 16 stands for the rim diameter of 16 inches. The letter R in the middle denotes a radial tire. In 235/65R17, the first number 235 represents the tire width of 235MM, 65 indicates the aspect ratio of the tire section is 65%, meaning the section height is 65% of the width, and 17 stands for the rim diameter of 17 inches. The letter R in the middle denotes a radial tire. The Great Wall H3 uses Nexen tires, and the spare tire specification is full-size. If you want to replace the tire yourself, you can follow the steps below: Take out the spare tire and jack, place the jack under the vehicle frame of the tire to be replaced, ensuring the jack touches the metal part of the frame; Raise the jack until it supports the car, the jack should be positioned under the vehicle, check and ensure the jack is at a right angle to the ground; Remove the hub cover, loosen the nuts counterclockwise, do not completely loosen the nuts, just enough to eliminate resistance. When loosening the nuts for the first time, keeping the tire on the ground ensures that the nuts turn instead of the tire; Turn the nuts counterclockwise until they come off, repeat this step for all lug nuts, and completely remove the nuts; Place the new tire on the wheel hub, carefully align the tire rim with the wheel bolts, install the lug nuts, and tighten them by hand until all nuts are concealed. At this point, the tire replacement is complete. In addition to the model, the tire also has the following common data marked on it: Tire cord material: indicated by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: indicates the maximum speed at which the tire can carry the specified load under specified conditions. Letters A to Z represent the certified speed ratings of the tire from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: indicates the rim specification compatible with the tire, facilitating practical use, such as: standard rim 5.00F.
Was this review help?
10
3
Share
More Forum Discussions

What is the difference between National 5 and National 6 emission standards?

The differences between National 5 and National 6 emission standards are: 1. Different emission levels: The carbon monoxide emission limit for National 5 is 1000mg per kilometer; for National 6 it is 700mg per kilometer. 2. Different restrictions: The sulfur content limit for National 5 is 10ppm, and the manganese content limit is 2mg per liter; for National 6, the sulfur content limit is 5ppm, and the manganese content limit is 1mg per liter. 3. Different forms: During the National 5 phase, diesel and gasoline vehicles had different emission standards; National 6 adopts a fuel-neutral principle, meaning the emission limits are the same regardless of the fuel type used.
13
3
Share

How to Determine if a Car Compressor is Good or Bad?

To determine if a car compressor is good or bad, follow these steps: 1. Start the engine and maintain the speed between 1250 to 1500 RPM; 2. Connect the manifold pressure gauge to the air conditioning refrigeration system, turn on the AC switch, and set the fan to the maximum position; 3. Touch the compressor's intake and exhaust ports. A good compressor will have a cold intake and a hot exhaust with a significant temperature difference between them. If not, it is likely damaged. The working principle of a car compressor: It draws refrigerant from the low-pressure area, compresses it, and sends it to the high-pressure area for cooling and condensation. The heat is dissipated into the air through the radiator, and the refrigerant changes from a gaseous to a liquid state, increasing its pressure.
9
1
Share

What is the Difference Between Regular Tires and Snow Tires?

The differences between regular tires and snow tires are: 1. Different appearance: Regular tires have symmetrical tread patterns; snow tires have asymmetric directional tread patterns. 2. Different materials: Regular tires are made of natural rubber; snow tires are made of a silica-mixed rubber. The functions of tires are: 1. To support the entire weight of the vehicle and bear the load of the car; 2. To transmit traction and braking torque, ensuring the adhesion between the wheels and the road surface; 3. To reduce and absorb vibrations and impact forces during driving, preventing severe vibrations and early damage to vehicle components; 4. To adapt to the high-speed performance of the vehicle and reduce driving noise, ensuring safety, handling stability, comfort, and energy efficiency.
8
1
Share

What is the tire pressure for the X-Trail?

The tire pressure for the X-Trail is 2.5bar. Hazards of excessive tire pressure: 1. The friction and adhesion of the tires will decrease, affecting braking performance; 2. It can cause steering wheel vibration and deviation, reducing driving comfort; 3. It accelerates the localized wear of the tread pattern in the center of the tire, shortening the tire's lifespan; 4. Increased body vibration can indirectly affect the lifespan of other components. Taking the 2021 X-Trail as an example, it is a compact SUV with the following dimensions: length 4675mm, width 1820mm, height 1722mm, wheelbase 2706mm, minimum ground clearance 208mm, and a body weight of 1489kg.
1
0
Share

What is the method to reset the maintenance light on Chery A5?

Chery A5 maintenance light reset method is: 1. Turn off the ignition switch; 2. Simultaneously press and hold the two arrow buttons, then turn on the ignition switch; 3. After 3 seconds, release the two arrow buttons; 4. The maintenance menu will appear, asking if you want to reset; 5. Press and hold the SET button for more than 3 seconds; 6. Press the MODE button; 7. Turn off the ignition switch to complete the reset. Taking the 2019 Chery A5 as an example, it is a compact car with body dimensions of: length 4552mm, width 1750mm, height 1483mm, wheelbase 2600mm, minimum ground clearance 147mm, and curb weight 1285kg.
9
2
Share

How to Adjust the Clock on Chery Tiggo 3?

To adjust the clock on the Chery Tiggo 3, follow these steps: 1. Turn off the ignition switch and set the headlight switch to the first position. 2. Press and hold the adjustment button until the hour field flashes, then release it. Adjust the hour by pressing the adjustment lever. 3. After setting the hour, the display will automatically switch to minute adjustment. Adjust the minutes by pressing the adjustment lever. Taking the 2020 Chery Tiggo 3 as an example, it is a compact SUV with the following dimensions: length 4420mm, width 1760mm, height 1670mm, wheelbase 2510mm, minimum ground clearance 190mm, and curb weight 1358kg.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.