What is the time limit for reversing into the garage in Subject 2?

2 Answers
LilaRose
07/24/25 10:03pm
In Subject 2, the time limit for reversing into the garage is 210 seconds. Below are the evaluation criteria for reversing into the garage: 1. Students who do not follow the prescribed route or sequence will fail. 2. If the car body crosses the line, fails to reverse into the garage, or stops midway, the result is a failure. 3. Exceeding the 210-second time limit without completing the reversing into the garage results in failure. Here are some related details: 1. Turn signals: Failing to use turn signals results in failure. Using turn signals but turning before the full 3 seconds have elapsed also results in failure. 2. Time constraints: The time taken to complete reversing into the garage must not exceed 210 seconds, and the time for parallel parking must not exceed 90 seconds. Exceeding these time limits will result in failure.
Was this review help?
19
4
Share
PaisleeAnn
08/10/25 2:51pm
When I was studying for my driver's license, I specifically researched that the time limit for the reverse parking test in Subject 2 is 210 seconds, which is 3 and a half minutes. This time frame is quite challenging, especially since beginners tend to get flustered easily. During my practice sessions, I often exceeded the time limit and had to repeatedly work on steering wheel control and speed management. The key is to simulate real exam scenarios in open spaces to develop a sense of rhythm. Exceeding the time limit directly results in point deductions, affecting the pass rate, so the time pressure helps us learn faster and more accurately. Remember, stay relaxed, don’t rush, and steady progress is the key. With enough practice, the time pressure will naturally feel less tight.
Was this review help?
17
4
Share
Expand All
More Forum Discussions

Where is the water temperature gauge displayed on the Hyundai Verna?

The Hyundai Verna does not have a water temperature gauge. A water temperature gauge typically has the letter "C" at one end indicating low water temperature and the letter "H" at the other end indicating overheating. The water temperature gauge displays the coolant temperature, which reflects the engine temperature. Coolant is used to lower the engine temperature. The hazards of an overheated engine are as follows: 1. High water temperature accelerates wear, reduces lubrication efficiency, and leads to increased fuel consumption. 2. It can cause issues like piston ring scuffing and, in severe cases, permanent engine damage. 3. Overheating can result in radiator bursts. 4. It may cause deformation or even damage to the cylinder head and cylinder block.
1
4
Share

What are the engine specifications of the BMW M4?

The BMW M4 is equipped with an "S55" inline 6-cylinder twin-turbocharged engine, available in high-power and low-power versions, paired with a 7-speed dual-clutch transmission. It can deliver a maximum output of 460 horsepower, which is nearly 30 horsepower more than the standard BMW M4, and the torque reaches 600 Nm. More details about the BMW M4 are as follows: 1. The BMW M4 belongs to BMW's M series, which is a performance car. M is the abbreviation, and the full name is M Power. The BMWs in this series feature engines that have been recalibrated by the M division to accommodate more aggressive driving. 2. The characteristics of BMW M are high horsepower, strong performance, and high driving pleasure. 3. The main competitors of the BMW M series are Audi's RS series and Mercedes-Benz's AMG series.
19
4
Share

Why does the manual transmission shake when starting?

Manual transmission vehicles may shake during startup due to the following reasons: 1. Insufficient engine power. 2. Loose connection between the transmission and chassis. 3. Uneven engagement between the clutch pressure plate and clutch friction disc. 4. Normally, manual transmission cars engage the clutch in a semi-coupled state during startup, so a certain degree of shaking is normal. Additionally, if starting on a slope without giving enough throttle, the shaking can be more noticeable. 5. Worn engine mounts. Engine mounts act as the engine's shock absorption system, absorbing minor vibrations during operation. If the engine mounts are faulty, these vibrations can transfer to the steering wheel and cabin, causing shaking at idle.
11
0
Share

Where is Dongfeng Honda's production location?

Dongfeng Honda's production base is located in the Economic and Technological Development Zone of Wuhan City, Hubei Province. Dongfeng Honda Automobile Co., Ltd. produces models including Jade, Civic, Greiz, Gienia, Envix, INSPIRE, Honda XR-V, Honda CR-V, Honda UR-V, Elysion, and Spirior. More information about Dongfeng Honda vehicles is as follows: 1. The advantages of Honda vehicles lie in fuel efficiency, durability, and mature and stable engine technology. 2. Honda engines have a characteristic of being suitable for modification to increase horsepower; the engines are powerful; they have a long lifespan and low fuel consumption. 3. The appearance is beautiful, and the handling is excellent.
16
3
Share

Is the Swift's rear suspension independent?

The Swift's rear suspension is not independent; this model employs a torsion beam semi-independent rear suspension. Additional details regarding the Swift's suspension are as follows: 1. The Swift is classified as a compact car, and vehicles in this category typically do not feature independent rear suspensions due to insufficient space at the rear of the chassis for such installations. 2. Sporty compact sedans may utilize independent rear suspensions, though such configurations remain uncommon in this vehicle class. 3. The Swift is equipped with two engine options: a 1.3-liter naturally aspirated engine and a 1.5-liter naturally aspirated engine.
5
3
Share

What engine does the Sagitar have?

The Sagitar is equipped with 1.2T and 1.4T turbocharged engines. Its advantages lie in the following four aspects: 1. Increases engine power and torque: It can significantly enhance engine power and torque without increasing engine displacement; 2. Improved fuel efficiency: More air enters the cylinders, allowing more fuel to be injected, enabling the engine to generate greater power and improving fuel efficiency; 3. Cost savings: Turbocharged engines are smaller in size and simpler in structure, significantly reducing R&D and production costs; 4. Environmental friendliness: The use of turbocharging technology reduces carbon monoxide emissions, benefiting environmental protection.
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.