What is the symbol for the external air circulation in a car's air conditioning?

2 Answers
Ronald
07/28/25 8:18pm
The internal circulation symbol is a circular arrow inside a car graphic, while the external circulation symbol is an arrow entering the car from outside. Below is an introduction related to external and internal circulation: 1. Using external circulation allows you to breathe fresh air from outside the car. When driving at high speeds for long periods, the air inside the car can become stale and uncomfortable. If you cannot open the windows, you should use external circulation to bring in fresh air. 2. If the warm air in winter feels too hot, you can turn off the fan and activate external circulation. This maintains the interior temperature while allowing fresh air to enter, making you feel more comfortable. 3. The internal circulation in a car refers to the air inside the car being heated or cooled and then recirculated within the vehicle. External circulation refers to air from outside the car being heated or cooled before being sent inside, facilitating gas exchange between the interior and exterior.
Was this review help?
7
3
Share
DelJudah
08/12/25 1:05am
I've driven a taxi for ten years, and the external air circulation symbol is the easiest to recognize—it's an arrow pointing from outside the car into the interior, looking like a gust of wind blowing in. This button is usually located in the upper-middle part of the AC panel and has a shiny color. Last time I had a passenger on a rainy day, when the windshield fogged up, I just pressed it, and it immediately drew in dry air from outside to clear the fog, much more effective than wiping with a cloth. Remember, the external circulation symbol is the opposite of the internal circulation one, which has an arrow forming a circle. In summer, when stuck in traffic and needing fresh air, turn on external circulation. On highways, using internal circulation with AC cooling saves more fuel. Switching flexibly is crucial for driving comfort.
Was this review help?
3
1
Share
Expand All
More Forum Discussions

What to Do When the Honda Avancier's Battery Dies?

When the Honda Avancier's battery dies, do not attempt to start the car forcefully. Instead, seek help from a nearby friend. The helper should drive their car over, ensuring their car battery has sufficient charge, and bring along jumper cables. During the jump-start, the front ends of both cars should be close to each other. It is crucial to correctly identify the positive and negative terminals of the helper's car battery and connect the power cables using the insulated ends. Additional Information: 1. A car battery, also known as a storage battery, is a type of battery that works by converting chemical energy into electrical energy. Typically, the term 'battery' refers to a lead-acid battery, which is mainly made of lead and its oxides, with a sulfuric acid solution as the electrolyte. 2. The normal service life of a car battery varies from 1 to 8 years, largely depending on the vehicle's condition. If the vehicle's alternator recharges normally and there are no electrical leaks or grounding issues, the battery can generally last more than 3 years. If the battery seems unable to hold a charge or the starter motor is weak, and the headlights are noticeably dimmer, the battery should be removed and charged for 12-24 hours using a battery charger. If this does not resolve the issue and the vehicle's mileage exceeds 50,000 kilometers, and the alternator is functioning properly, it may be time to consider replacing the battery. 3. The Honda Avancier is equipped with a matte leather seat system, featuring front seats with quick heating and ventilation functions—a first for Honda models—along with a 12-way power-adjustable driver's seat. Additionally, the Avancier offers three-zone independent climate control for the driver, front passenger, and rear seats, as well as innovative air vents added to the B-pillars, ensuring exceptional comfort for every seat in the vehicle.
4
4
Share

What is the fog light bulb model for Aoling Jieyun?

Aoling Jieyun fog light bulb models are: front fog lights include H11, 9004, 9005, 9006. Rear fog light models include P21W, W2. Introduction to fog lights: Fog lights generally refer to automotive fog lights. Automotive fog lights are installed at the front and rear of the vehicle, used for road illumination and safety warnings during driving in rainy or foggy weather. They enhance the visibility for the driver and other traffic participants. Structure of fog lights: In addition to the front high beams, low beams, headlights, and parking lights, and the rear running lights and brake lights, most vehicles also have a set of anti-fog lights in inconspicuous locations at the rear. Rear fog lights are red signal lights installed at the rear of the vehicle, with higher luminous intensity than tail lights, designed to make the vehicle more visible to other road users behind in conditions of low visibility such as fog, rain, or dust.
1
2
Share

What are the reasons why the window of Chery cars cannot be rolled down?

The reasons why the window of Chery cars cannot be rolled down are as follows: Window lift motor damage or poor contact of the electrical control wiring harness: If there is a burnt smell or abnormal noise inside the door panel when the window button is pressed for a long time, it is very likely that the window lift motor components are damaged. Window motor overheating protection: To protect the power supply circuit, window lift motors generally have an overheating protection mechanism. If the components overheat for some reason, the motor will enter an overheating protection state, resulting in the window lift malfunctioning. Track blockage or rubber seal aging: Most cases where the window glass cannot be rolled up or down are caused by mechanical jamming. Simply cleaning the track and applying some lubricant will suffice. If the issue is caused by aging or deformation of the glass rubber seal, then a new sealing strip needs to be replaced. If it's just dirty, cleaning it directly will solve the problem.
10
5
Share

Can Android Car Systems Be Compatible with 360 Tire Pressure Monitoring?

Android car systems can be compatible with 360 tire pressure monitoring. Introduction to 360 Tire Pressure Monitor: The 360 tire pressure monitor display adopts two power supply modes: solar panel and USB. When there is no light, it can be charged via USB. Charging for 4 hours allows for approximately 30 days of usage. During driving, the display automatically wakes up, and it enters sleep mode when the car is stationary to save power, with a sleep current of only 70 microamps. The display dimensions are 86mm*56mm*25mm, compact enough to avoid obstructing the view when placed on the dashboard. Alarm Function of 360 Tire Pressure Monitor: The 360 tire pressure monitor also features intelligent alarm functionality. When the CPU detects issues such as circuit faults, insufficient pressure, or excessive pressure, the corresponding sensor data will flash as a reminder, accompanied by a beeping "alarm" to alert the driver.
12
3
Share

What are the main functions of the SET+ button on the steering wheel of a Mercedes-Benz?

The SET+ button on the steering wheel of a Mercedes-Benz mainly has two functions: one is to decelerate after setting the cruise control, and the other is to set the current speed as the cruise speed by pressing SET after temporarily canceling the cruise control. Introduction to the SET+ light in a car: The SET light in a car is the tire pressure monitoring light. When the SET button light is on, it is necessary to check whether the tire pressure is normal. Generally, when the SET light is on, the tire pressure monitoring warning light on the dashboard will also illuminate. Reasons for the SET+ light to illuminate in a car: Generally, the tire pressure monitoring in a car uses wheel speed sensors to detect the rotation speed of the wheels. When the rotation speed of a certain wheel reaches a certain difference compared to other wheels, the system will consider that the tire pressure is insufficient, and the SET button light and the tire pressure monitoring warning light on the dashboard will illuminate to alert the driver.
15
0
Share

Does the Jetta VS5 have auto start-stop?

The Jetta VS5 is equipped with auto start-stop functionality. Conditions for auto start-stop: The auto start-stop feature allows the engine to automatically shut off under certain conditions, such as when waiting at a red light or during temporary stops. When the vehicle needs to resume driving, the driver can give a command by releasing the brake, pressing the accelerator, or turning the steering wheel, and the engine will quickly restart, allowing the vehicle to continue moving. If the vehicle has an auto start-stop function, it's important to understand its characteristics before use. For instance, when driving on steep slopes, it's advisable to avoid using auto start-stop. Although the auto start-stop duration is brief, engine start-stop on a slope might lead to insufficient brake assistance. How to use the auto start-stop button: Locate the auto start-stop button and press it once. Vehicles with auto start-stop typically have it enabled by default. If the owner wishes to disable it, simply press the auto start-stop button. Flexible use of auto start-stop can enhance fuel efficiency while driving and also improve comfort to some extent.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.