What is the suitable tire pressure for sedan cars in summer?

1 Answers
VanEvelyn
07/30/25 5:51am
In summer, the tire pressure can be slightly reduced. It is recommended to maintain a tire pressure of 2.2 bar or 2.3 bar during summer. Below is more information about tires: 1. Tires are the only components of a car that come into contact with the ground, and they are crucial for driving stability and safety. The tire pressure is very important for the tires. 2. The tire pressure should neither be too high nor too low. If the tire pressure is too high, it will reduce the contact area between the tire and the ground, thereby decreasing grip and handling stability. If the tire pressure is too low, it may cause wave-like deformation during high-speed driving, increasing the risk of a tire blowout. 3. Generally, the manufacturer's recommended tire pressure can be found on the B-pillar or fuel tank cap of the car.
Was this review help?
8
1
Share
More Forum Discussions

Will Fuel Consumption Decrease After the First Maintenance of a New Car?

New car fuel consumption is unrelated to the first maintenance but related to the break-in period. Here is the relevant information: 1. First maintenance: The first maintenance is done at a 4S dealership, where the oil used is the same as the original oil in the car, so there is no change in the oil itself—it just becomes cleaner. Other aspects are just routine checks, and the engine program will not be adjusted via computer; at most, they will check for any fault codes and whether the data is normal. Therefore, fuel consumption is unrelated to the first maintenance itself. 2. Break-in period: Fuel consumption is somewhat related to the break-in period, but it is not significantly tied to the mechanical break-in itself—it has more to do with the driver. Mechanically, during the break-in period, the fit between moving parts is not yet perfect, resulting in relatively higher friction, less smooth movement, and greater resistance, which leads to higher fuel consumption.
15
5
Share

What to Do When Driving License Points Are Reduced to Zero?

If a driving license accumulates zero points within one cycle, the driver must attend a seven-day training course at the local traffic management department of the public security authority. After completing the training, the driver must retake the subject one exam. The process is as follows: the traffic management department of the public security authority will confiscate the driving license; the driver must participate in the study of road traffic safety laws and regulations and take the exam as required; upon passing the exam, the traffic management department will clear the penalty points and return the driving license. After accumulating 12 penalty points on a driving license, the driver must undergo eight hours of daily training on road traffic safety laws and related knowledge. The exam content is the same as that for new driving test applicants. Once the subject one exam is passed, the penalty points on the driving license will be reset to zero, and the traffic management department will return the driving license to the driver. If the exam is failed, the driver must retake the training and exam. Notes on Driving License Penalty Points: If a driving license accumulates 12 penalty points for two consecutive cycles or 24 points in the same cycle, the driver must retake the subject one and subject three exams. Traffic management rules are very strict—any traffic violation by a motor vehicle will result in penalties for the driver. In severe cases, the driving license may even be revoked.
10
1
Share

How to Turn Off ECO Mode in Honda Fit?

For the Honda Fit, simply press the ECO mode button located next to the gear shift lever while the vehicle is running to deactivate the fuel-saving mode. Vehicle ECO modes are categorized into active ECO driving mode and passive ECO driving mode, with the key difference lying in intelligent fuel and electricity distribution control. Passive ECO mode doesn't have a dedicated button but displays a reminder indicator during driving. Active ECO mode features a physical button - pressing it will illuminate the ECO indicator on the instrument panel.
11
4
Share

How to Prevent the Rear of the Car from Crossing the Line When Reversing into the Garage?

Usually, if you don't turn the steering wheel too late, there's still room for remedy. First, keep turning the steering wheel all the way to the right to reverse into the garage. When the car body is parallel to the garage boundary line, continue to keep the steering wheel turned all the way to the right without straightening it. Allow the car to enter the garage space at an angle, which creates distance between the vehicle and the left boundary line. At this point, pay attention to the timing of straightening the steering wheel. Once sufficient distance is created, turn the steering wheel slightly to the left to align the car body, then continue reversing slowly until reaching the stopping point.
4
5
Share

What is the 0-100 km/h acceleration time of the Bentley Bentayga?

According to official data, the Audi A6 comes with two engine displacements: 3.0T and 2.0T. The 3.0T model accelerates from 0-100 km/h in 5.6 seconds, while the 2.0T model achieves it in 7.5-8.3 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque, in simple terms, represents the strength of the engine. The greater the torque, the stronger the force pushing the vehicle, resulting in faster acceleration. For example, the Audi R8 has a maximum torque of 570 Nm and accelerates from 0-100 km/h in 3.1 seconds. The Audi A6 3.0T has a torque of 500 Nm and achieves 0-100 km/h in 5.6 seconds. Transmission efficiency: The transmission acts as a medium for power delivery, inevitably involving power loss. Higher transmission efficiency leads to better acceleration performance. Generally, transmission efficiency ranks as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Audi A6 is equipped with a 7-speed wet dual-clutch transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (unit: Hp/T). A higher power-to-weight ratio results in faster acceleration. For instance, the Audi R8 has a power-to-weight ratio of 373 Hp/T and accelerates from 0-100 km/h in 3.1 seconds. The Audi A6 has a power-to-weight ratio of 171 Hp/T and achieves 0-100 km/h in 5.6 seconds.
11
5
Share

How many liters of engine oil does the Arrizo 5 use?

This vehicle's engine requires approximately 4L of oil, usually slightly less than 4 liters. Below is relevant information about the Arrizo 5: 1. Body dimensions: The Arrizo 5 measures 4572mm in length, 1825mm in width, 1482mm in height, with a wheelbase of 2670mm. Through optimized design of front and rear seating space, it provides more comfortable headroom and legroom. The vehicle features up to 24 storage compartments, significantly enhancing driving and riding convenience. 2. Powertrain: The Arrizo 5 is equipped with a 1.5L naturally aspirated engine delivering maximum power of 116 horsepower and maximum torque of 141N·m. It is paired with either a 5-speed manual transmission or 7-speed CVT. The manual transmission features gear shift reminder function, while the CVT offers Economy (ECO) and Sport driving modes for enriched driving experience. 3. Noise control: The Arrizo 5 employs multiple vehicle noise insulation designs and optimized acoustic packages, achieving an idle cabin noise level of just 39.7 decibels.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.