···
Log in / Register

What is the speed limit at uncontrolled intersections without traffic signals?

6Answers
Gemma
07/29/2025, 07:14:27 AM

Traffic laws do not specify a specific speed limit, but require drivers to slow down. According to the "Regulations for the Implementation of the Road Traffic Safety Law," motor vehicles must not exceed the speed indicated by traffic signs or markings while driving on the road. Traffic rules for uncontrolled intersections without signals: Right-side priority: At uncontrolled intersections, vehicles on the right side of the direction of travel have the right of way and should be given priority. Right-turning vehicles yield to straight-moving vehicles: At uncontrolled intersections, right-turning vehicles must yield to straight-moving vehicles. Right-turning vehicles yield to left-turning vehicles: At uncontrolled intersections, right-turning vehicles must yield to left-turning vehicles. Left-turning vehicles yield to straight-moving vehicles: At uncontrolled intersections, left-turning vehicles must yield to straight-moving vehicles. Yield signs must be obeyed: At intersections with yield signs, the party with the yield sign must yield. Relevant regulations: According to Article 52 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China," when motor vehicles pass through intersections without traffic signal control or traffic police direction, in addition to complying with the provisions of Article 51 (2) and (3), the following rules must also be observed: If there are traffic signs or markings, the party with the right of way proceeds first; If there are no traffic signs or markings, stop and observe before entering the intersection, and yield to vehicles coming from the right; Turning motor vehicles must yield to straight-moving vehicles; Right-turning vehicles from the opposite direction must yield to left-turning vehicles.

Was this review help?
108
Share
VanKeegan
08/13/2025, 02:03:12 PM

I've been driving in the city for many years, and when approaching intersections without traffic lights, I always slow down to about 20 to 30 kilometers per hour. Safety first! At such intersections, it's hard to see turning vehicles or pedestrians, and driving too fast can easily lead to accidents. I've seen novice drivers neglect speed limits and almost collide. Different intersection shapes require even lower speeds, such as T-junctions or roundabouts. Extra caution is needed to slow down during slippery winter roads, staying alert to protect yourself and others. Make it a habit to release the accelerator early, check the rearview mirror, and ensure a safe passage.

Was this review help?
13
Share
Expand All
VeraRose
10/07/2025, 11:05:54 PM

When approaching this type of intersection, I usually keep my speed around 20. Experience tells me that slower is safer. Once, I was in a hurry and forgot to slow down, and a car suddenly rushed out from the opposite direction, which gave me a scare. Since then, I've always reminded myself to be cautious. Although there's no fixed number in the rules, the purpose is to avoid accidents. You can go slightly faster when visibility is good, otherwise take it slow. Always observe the surroundings, especially in school zones where even lower speeds are better. Once it becomes a habit, you'll naturally drive more smoothly.

Was this review help?
2
Share
Expand All
OMaggie
11/20/2025, 11:25:21 PM

When approaching an intersection without traffic signals, I recommend slowing down to around 20 kilometers per hour for safety. This allows clear visibility of any movements and avoids blind spot dangers. Driving too fast may cause collisions, which outweigh any benefits. Maintain a steady pace to ensure safe passage without accidents.

Was this review help?
1
Share
Expand All
SanLevi
01/11/2026, 01:02:02 AM

When driving, I pay special attention to speed at intersections like this. Without traffic lights, it's best to keep the speed between 20 to 30 km/h. I've seen accidents caused by speeding that resulted in scratches, and the consequences were quite troublesome. In bad weather, you should go even slower. Driving slowly allows you to clearly see the movements of vehicles and pedestrians on both sides. Developing good habits, such as preparing to slow down in advance, can significantly reduce accidents. These types of intersections are common in suburban areas, and slowing down is a form of self-protection.

Was this review help?
1
Share
Expand All
McTanner
04/07/2026, 10:24:57 PM

In my daily driving, I've encountered many intersections without traffic lights, usually maintaining a speed of around 25 kilometers per hour. This allows me to handle sudden situations, such as a car unexpectedly entering the intersection. Driving too fast can make it hard to control the vehicle, and I have a friend who got a ticket for this. It's wise to adjust speed according to road conditions, reducing speed during rainy or overcast days. Overall, it's best not to exceed the speed limit—safety is the top priority.

Was this review help?
4
Share
Expand All
More Q&A

can you test drive a car overnight

Yes, you can test drive a car overnight, but it's not a standard practice offered by every dealership. It's primarily a discretionary perk used as a sales-closing tool for serious, qualified buyers. The availability depends entirely on the dealership's policies, your relationship with the salesperson, and their assessment of your credibility as a buyer. Overnight test drives are more common at luxury brand dealerships (like Lexus or BMW) or with high-value customers. The process is not as simple as asking for the keys. Dealerships will require a thorough credit check, a copy of your driver's license and proof of insurance, and often a signed agreement outlining your responsibilities for the vehicle during the loan period. The main advantage is the ability to experience the car in real-world conditions. You can test the commute, see how it fits in your garage, check car seat installation, and evaluate comfort on a longer drive. This extended time helps you discover nuances that a 15-minute spin around the block can't reveal. If you're interested, your approach matters. Be upfront and professional. Explain why you need the extra time—perhaps you need to ensure it works for a specific daily routine. Building rapport with the salesperson and demonstrating you are a serious, pre-approved buyer significantly increases your chances. Factor Likely to Get an Overnight Test Drive Unlikely to Get an Overnight Test Drive Customer Profile Pre-approved financing, strong credit, serious intent to buy soon. Just browsing, no pre-approval, early in research phase. Dealership Type Luxury brands, high-volume stores with flexible policies. Smaller, budget-focused dealerships with stricter inventory control. Vehicle High-inventory model, not a high-demand/new release. Limited edition, brand-new model, high-performance vehicle. Timing Weekday, end of the month or quarter when sales goals are pressing. Busy weekend, beginning of the sales period. Relationship Repeat customer or have built strong rapport with a salesperson. First-time visitor, no prior contact.
113
Share

can you use a wood sander on a car

No, you should not use a wood sander on a car. The primary reason is the extreme aggressiveness of the tools designed for woodworking. Using a standard wood sander, especially a belt sander or an orbital sander with coarse-grit paper, will instantly and irreparably damage your car's clear coat and paint. Automotive paint requires a much more delicate touch. The correct tools for sanding car paint are dual-action (DA) polishers or random orbital polishers , which are designed to minimize heat buildup and prevent the creation of deep, visible scratches known as holograms or buffer trails . The fundamental difference lies in the tool's action and the abrasives used. Wood sanders are built for rapid material removal on a soft surface. Automotive sanding and polishing are about precision refinement. When correcting paint, you use a process called wet sanding with specialized ultra-fine grit sandpaper (often in the 1000-3000 grit range) and copious amounts of water or lubricant to safely level the paint surface without gouging it. A wood sander cannot replicate this controlled, lubricated action. If you need to sand a car, it's for specific reasons like removing orange peel texture from a new paint job, smoothing a touch-up repair, or eliminating deep scratches before polishing. For each task, a specific automotive-grade tool and technique are required. Task Recommended Tool Grit Range (Sandpaper) Key Consideration Removing Orange Peel Dual-Action Polisher with Wet Sanding 1500 - 3000 Requires skill; always follow with compound and polish. Smoothing a Touch-Up Paint Spot Hand Sanding Block (by hand) 1000 - 2000 Feather the edges into the surrounding clear coat. Eliminating Deep Scratches Dual-Action Polisher with Compound N/A (Uses liquid compound) Try polishing first; sand only if the scratch remains. Final Paint Polishing Random Orbital Polisher N/A (Uses polishing pads) Uses foam or microfiber pads with polish, not sandpaper. Complete Paint Stripping Professional Grade DA Sander 80 - 400 (Dry) This is a professional-level bodywork task for bare metal. Attempting any of these with a wood sander will result in needing a full repaint. The investment in the proper automotive tool is essential for protecting your vehicle's value and appearance.
114
Share

can you use a bottle jack on a car

Yes, you can use a bottle jack on a car, but it is not the recommended tool for most roadside or home garage repairs due to significant stability and safety concerns. A bottle jack's small base and narrow lifting pad make it inherently unstable on uneven surfaces, posing a serious tip-over risk. For safe, routine use, a floor jack is the superior choice. The primary risk with a bottle jack is its instability. Unlike a floor jack, which has a wide base and low center of gravity, a bottle jack has a small footprint. If the ground is soft, sloped, or uneven, the jack can shift or kick out as the vehicle is raised. This is extremely dangerous if you are under the car. Furthermore, bottle jacks are not designed for the precise, gradual lifting needed for tire changes. They can lift a car very quickly and abruptly, which can jostle the vehicle off the jack stands if they are not perfectly positioned. If a bottle jack is your only option, follow these critical safety steps: Park on a Solid, Level Surface: Only use it on solid pavement or concrete, never on dirt, gravel, or asphalt on a hot day. Engage the Parking Brake and Chock the Wheels: This prevents the car from rolling. Use a Solid Lift Point: Place the jack's saddle under a vehicle's designated jack point or a solid part of the frame. Never jack on body panels, rocker panels, or the oil pan. Lift Minimally and Use Jack Stands: Lift the car only as high as absolutely necessary. Never, under any circumstances, get under a vehicle supported only by a jack. You must immediately place jack stands under a secure part of the frame or axle before working. The following table compares a bottle jack to a standard floor jack for automotive use: Feature Bottle Jack Floor Jack Stability Low; narrow base High; wide, long base Lifting Control Fast, abrupt lifting Smooth, controlled hydraulic action Saddle Size Small, can slip off lift points Larger, contoured for better contact Ease of Positioning Difficult to slide under low vehicles Easy with low-profile models Primary Use Case Industrial, agricultural, or emergency use Standard for automotive repair In summary, while a bottle jack has the lifting capacity, its design makes it a hazardous choice for car maintenance. Investing in a good floor jack and a pair of quality jack stands is a critical investment in your safety.
111
Share

can you take turo car out of state

Yes, you can generally take a Turo car out of state, but it is not automatically allowed . The final decision rests with the individual car owner, and you must get their explicit permission before crossing state lines. The most critical step is to communicate your travel plans directly with the owner through the Turo app's messaging system before you book the trip. This is a non-negotiable part of the process. Many owners are perfectly fine with out-of-state trips, but some may have restrictions due to their personal insurance policies, concerns about wear and tear, or specific mileage limits. Your Turo rental agreement will specify a daily mileage limit (e.g., 200 miles per day). A long-distance trip can easily exceed this limit, resulting in per-mile overage fees that can add up quickly. It's essential to factor these potential costs into your budget or consider selecting a booking package with unlimited mileage if the owner offers it. Furthermore, your protection plan (the insurance equivalent on Turo) remains valid throughout the US and Canada, provided you are using the car within the terms of the rental agreement. However, if you take the car out of the country without authorization or use it in violation of the rules (like off-roading), your coverage will be voided. Before you go, also perform a quick check of the car's registration and insurance documents stored in the vehicle to ensure everything is valid, as driving with expired documents is your responsibility. Consideration Key Details Why It Matters Owner Permission Mandatory; must be obtained via Turo messaging before booking. Taking a car without approval can lead to penalties or banned from Turo. Mileage Limits Standard plans have daily limits (e.g., 150, 200 mi); unlimited plans may be available. Exceeding limits incurs fees (e.g., $0.75/mi), significantly increasing trip cost. Protection Plan Coverage Valid throughout the U.S. and Canada when terms are followed. Provides peace of mind for accident or damage coverage while traveling. Vehicle Documentation You are responsible for ensuring the car's registration and proof of insurance are valid. Driving with expired documents can lead to legal trouble and fines. Toll Roads Use your own transponder (like E-ZPass) or pay via Turo's reimbursements process. Turo does not provide transponders; unpaid tolls incur admin fees.
117
Share

can you use a truck hemi for a car

Yes, you can physically install a truck HEMI engine in a car, but it is a complex and expensive project that is far from a simple bolt-in operation. The primary challenges involve the engine's significant size and weight, which require extensive modifications to the car's engine bay, frame, and suspension. You'll also need to address compatibility with the car's transmission, drivetrain, electronics, and cooling systems. For most people, swapping a modern car engine or using a crate engine designed for such swaps is a more practical and reliable path. The core of the challenge is physical fitment . Truck HEMI engines, like the popular 5.7L or 6.4L variants, are physically larger and heavier than most car engines. This often requires cutting and re-fabricating the car's engine bay and potentially modifying the front crossmember or firewall. The car's K-member (engine cradle) will almost certainly need to be replaced with a custom unit to accommodate the different engine mount locations. Next, you must consider the drivetrain integration . The car's existing transmission is unlikely to bolt up to the HEMI. This means you'll need a compatible transmission (like a Chrysler NAG1 or a modern 8-speed automatic) and a custom driveshaft to connect it to the rear differential. The stock car differential may not withstand the HEMI's torque, leading to a potential need for an axle upgrade. The most daunting aspect for modern swaps is the electrical system and ECU . A truck HEMI's computer (PCM) is integrated with the vehicle's security system (SKIM), transmission control, and other modules. To make it run standalone in a different chassis, you'll need a specialized wiring harness and a tuner to reprogram the PCM, which is a significant technical hurdle. Consideration Truck HEMI Swap Modern Car Engine Swap (e.g., LS) Cost High ($10,000 - $20,000+) Moderate ($5,000 - $12,000) Complexity Very High Moderate to High Aftermarket Support Growing, but less than LS Extensive and well-documented Weight ~500 lbs (5.7L) ~450 lbs (LS3 6.2L) Electronic Integration Challenging (requires PCM unlock) More straightforward solutions Ultimately, while the raw power of a truck HEMI is appealing, the project demands advanced fabrication skills, deep pockets, and patience. For a more straightforward high-power swap, a GM LS-series engine is often the preferred choice due to its compact size, lighter weight, and vast aftermarket support designed specifically for engine swaps.
118
Share

can you use mouthwash to deice car

No, you should not use mouthwash to deice your car. While some mouthwashes contain alcohol which can lower the freezing point of water, it is an ineffective and potentially damaging method. The primary type of alcohol in most mouthwashes is ethanol, but it is diluted with water and other ingredients like coloring and flavoring agents. These additives can leave a sticky, sugary residue on your windshield that attracts dirt and impairs visibility. More critically, the alcohol concentration is too low to work effectively against ice. A much greater risk is the potential for damage to your vehicle. The chemicals and dyes in mouthwash can harm your car's paint and the rubber seals around the windows. Furthermore, if the mouthwash contains methanol , it is highly toxic and its fumes should not be inhaled in a confined space. For safe and effective deicing, use a dedicated commercial deicer spray or an isopropyl alcohol solution mixed with water. The best practice is prevention: use a windshield cover overnight or start your car and let the defroster work for a few minutes. Physically removing ice with a plastic scraper and brush is always the most reliable approach. Method Effectiveness Risk to Vehicle Cost & Availability Commercial Deicer High Low $$; available at auto stores Isopropyl Alcohol Mix High Low $; available at pharmacies Mouthwash Very Low High (paint/rubber damage) $; available at home Vinegar/Water Solution Low-Moderate Low $; available at home Warm Water High (temporary) High (cracked windshield) $; available at home
105
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.