What is the solution for the Envision P0299 trouble code?

Does installing the license plate with a nut spacer have any impact?

No impact. Here are the relevant details: 1. Function of the nut: The primary purpose of the license plate nut is to secure the license plate. Unlike regular screws, the ones used for license plates are anti-theft screws. Once installed, these screws cannot be unscrewed. The only way to remove the license plate is by destroying the anti-theft screw. This measure is designed to prevent vehicle owners from changing their license plates without authorization. 2. Identification on the nut: Each license plate nut has a small identification mark on its top. This mark corresponds to the jurisdiction where your vehicle was registered. For example, if your license plate starts with "Yue A," then the mark on the nut should also be "Yue A." If these marks do not match, you may face corresponding penalties.

19

3

Share

What to Do If You Don't Want to Buy a Car After Winning the License Plate Lottery?

Here is relevant information about not wanting to buy a car after winning the license plate lottery: 1. According to current policy regulations: The validity period of the obtained quota is 6 months. After winning the lottery, you must complete vehicle registration within six months; otherwise, the quota will be deemed automatically invalid. If you later decide to buy a car, you will have to participate in the lottery again. 2. The license plate obtained through the lottery cannot be gifted: You can temporarily lend the plate to relatives or friends who want to buy a car but haven't won the lottery. This means allowing them to purchase a car in your name, with the vehicle's usage rights also granted to them. Once they win their own license plate lottery, you can complete a vehicle transfer procedure, transferring ownership to them along with their new license plate.

17

0

Share

What to Do When the Wiper Stops in the Middle?

The solutions for a wiper stopping in the middle are as follows: 1. Check the wiper blade: If you usually neglect the maintenance of the car's wiper blades and find they are severely damaged and unable to function properly, promptly replace a set of wiper blades. 2. Check the wiper motor: Open the car's hood to see the wiper motor. You can touch the wiper motor by hand. If it feels hot, it indicates an internal short circuit, and the motor should be replaced. 3. Check the wiper linkage: The wiper linkage has many connection points. If these points have issues, the wiper won't work properly. You can observe the wiper's operation to determine if it's a linkage failure. 4. Check the wiper fuse: To protect the car's wiring, each electrical device has a fuse. If the wiper doesn't work, check if the wiper fuse is blown and replace it with a spare fuse from the car. 5. Check the wiper switch: Although the wiper switch isn't used frequently, car electronics can be unstable. If no issues are found in the above checks, consider that the wiper switch might be faulty. Use a multimeter to test the switch or replace it with a new one for testing. 6. Check the wiper wiring: Inspecting the wiring is a complex and time-consuming task. You need to be proficient in using a car multimeter to measure voltage, resistance, and current, and combine this with practical experience to identify the wiring fault causing the wiper to malfunction.

12

4

Share

What are the two common structural types of oil pumps?

There are two common structural types of oil pumps. Below are the specific introductions to these common structural types of oil pumps: 1. Gear-type oil pump: The oil pump housing is machined with an inlet and an outlet. Inside the oil pump housing, there is a driving gear and a driven gear. There is a very small gap between the gears and the inner wall of the housing. The working principle is that when the gears rotate clockwise, the volume of the inlet chamber increases as the gear teeth move away from the meshing direction, creating a certain degree of vacuum. The lubricating oil is then drawn from the inlet and fills the inlet chamber. The rotating gears carry the lubricating oil between the teeth to the oil chamber. As the gear teeth enter the meshing state, the volume of the outlet chamber decreases, increasing the oil pressure. The lubricating oil is then delivered to the engine oil passage through the outlet. 2. Rotor-type oil pump: The oil pump housing contains an inner rotor and an outer rotor. The inner rotor is fixed to the driving shaft with a key, and the outer cylindrical surface of the outer rotor fits with the housing, with a certain eccentricity between them. The outer rotor is driven by the inner rotor to rotate. The housing is equipped with an inlet pipe and an outlet. The working principle of the rotor-type oil pump is that during the rotation of the inner and outer rotors, the tooth profile of each tooth of the rotors always forms point contact with each other, creating four enclosed working chambers between the inner and outer rotors. Since the outer rotor always rotates slower than the inner rotor, the volumes of these four working chambers continuously change.

9

1

Share

How to Open the Trunk of the Cavalier?

The methods to open the trunk of the Cavalier: 1. Press the trunk release switch located below the driver's door to open it; 2. Use the button on the key to open the trunk. The Cavalier is a compact sedan produced by SAIC-GM Chevrolet. Taking the Cavalier 2020 320 Manual Xinxiang Edition (China VI) as an example: its body dimensions are 4474 mm in length, 1730 mm in width, and 1471 mm in height, with a wheelbase of 2600 mm. The Cavalier 2020 320 Manual Xinxiang Edition (China VI) is equipped with a 1.3L L3 naturally aspirated engine, delivering a maximum horsepower of 107 HP, a maximum power of 79 kW, and a maximum torque of 130 Nm.

20

1

Share

Can a car be maintained outside of a 4S shop?

It is possible to maintain a car outside of a 4S shop. There is no national regulation requiring maintenance to be performed at a 4S shop, but it must be done at a legitimate business, and there must be proof that the replaced parts are safe and reliable. This approach can save money without worrying about voiding the warranty. Daily car maintenance is very important; neglecting it can not only cause unnecessary damage to the vehicle but also endanger driving safety. Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of a car, also known as car servicing. Modern car maintenance mainly includes the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, and other maintenance scopes. The purpose of car maintenance is to keep the car clean, ensure normal technical conditions, eliminate hidden dangers, prevent faults, slow down the deterioration process, and extend the service life.

16

5

Share

What is the solution for the Envision P0299 trouble code?

Does installing the license plate with a nut spacer have any impact?

What to Do If You Don't Want to Buy a Car After Winning the License Plate Lottery?

What to Do When the Wiper Stops in the Middle?

What are the two common structural types of oil pumps?

How to Open the Trunk of the Cavalier?

Can a car be maintained outside of a 4S shop?

How to Connect Bluetooth in an Older Model Van?

Why does the car air conditioner not cool when driving on the highway?

What is the fuel consumption of the Jinjila?

What are the vehicle parking management regulations?