···
Log in / Register

What is the solution for the Buick P0172 system running too rich?

1Answers
RoseDella
07/29/2025, 02:22:58 PM

Buick P0172 system running too rich is mainly caused by high voltage in the fuel system or an overly rich air-fuel mixture. If it's due to high voltage in the fuel system, the solution is to clean the throttle body. If it's due to an overly rich air-fuel mixture, the solution is to replace the filter or oxygen sensor. Below is an introduction to Buick: 1. Buick is an automobile brand marketed by General Motors in the United States, Canada, and China. It is sold in North America, China, CIS countries, and the Middle East. 2. Buick includes many well-known models: Buick Excelle, Buick Excelle GT, Buick Verano, Buick Envision, Buick Regal, Buick LaCrosse, Buick Encore, Buick Encore GX, Buick Enclave, Buick Enclave S, Buick Enclave Flagship, Buick GL6, Buick GL8 Land Business Class, GL8-ES Land Honor, pure electric VELITE6, and the high-end sub-brand Avenir Aivia.

Was this review help?
111
Share
More Q&A

How to turn off the daytime running lights on the Changan UNI-T?

Sit in the driver's seat and use the left turn signal lever to indicate left. The wheelbase is 2731mm, and the fuel tank capacity is 50 liters. Then pull the high beam lever and hold the action. These are lights that make the vehicle more easily recognizable during daytime driving. Insert the key and turn it to power on, but do not start the engine at this time. The dimensions of the Sagitar are 4753mm in length, 1800mm in width, and 1462mm in height. Wait for 4 seconds, and you will hear a beep sound, which means the daytime running lights are turned off. Daytime running lights are installed at the front of the vehicle for daytime driving.
118
Share

Is There a Mandatory 15-Year Scrap Policy for Diesel Vehicles?

There is no mandatory retirement period for private diesel vehicles; instead, they are subject to guided retirement policies. As long as the vehicle passes the annual inspection, it can continue to be driven on the road. The retirement of private diesel vehicles is not determined by age but rather by mileage and emission measurement data. If a private diesel vehicle reaches 600,000 kilometers in mileage, it will be mandatorily retired. Additional information: 1. New policy regulations: According to the new policy, private vehicles must undergo two annual inspections per year starting from the 15th year after registration. For vehicles over 20 years old, they must undergo four regular inspections annually starting from the 21st year. The new policy imposes strict regulations on older vehicles during inspections. During the power inspection for private vehicles, the chassis output power must not be less than 60% of the engine's rated power or 65% of the maximum net power.
115
Share

Can E95 and 95 be mixed for use?

They can be mixed for use without any impact on the vehicle. E95 and 95: E95 represents ethanol gasoline, while 95 represents regular gasoline. Mixing the two will not affect the operation of motor vehicles. As long as the specified fuel grade is used when refueling, there will be no issues. Precautions for refueling motor vehicles: When refueling a motor vehicle, it is necessary to fill the fuel tank completely. Never wait until the fuel indicator light comes on before refueling. This situation can easily damage the fuel pump, rendering the vehicle inoperable. The required fuel grade for the motor vehicle is indicated on the fuel tank cap, and this must be noted when refueling.
116
Share

Does a Higher Value on the Car Speedometer Indicate Better Performance?

Performance-oriented cars certainly have higher speedometer values, but a higher speedometer value does not necessarily mean better car performance. Here is some relevant information about car speedometers: 1. Introduction: The speedometer is used to view driving speed and supports two units: miles per hour or kilometers per hour. The speedometer function requires strong GPS signal support and can display speeds up to 220 km/h. 2. Screen Resolution: WVGA (800×480), FWVGA (480×854), qHD (960×540), DVGA (960×640), 480×1024, WSVGA (1024×600), WXGA (1280×800), XGA (768×1280), 1280×720, etc.
109
Share

What are the differences between the Xingyue S and Xingyue?

The differences between the Xingyue S and Xingyue mainly lie in two aspects. Below is a detailed introduction to these two differences: Appearance: Judging solely by appearance, the Xingyue S has a stronger sporty feel compared to the Xingyue. The treatment of some lines and edges is sharper, giving it a more youthful and dynamic visual appeal. Additionally, the Xingyue S incorporates fluorescent green decorative strips in the details, resembling claw-like patterns, which are quite novel. In contrast, the regular Xingyue has a weaker sporty feel and a more conservative design. Safety: From a safety perspective, the Xingyue S has a higher safety coefficient. The Xingyue S features over 78% of its body and chassis structural components made from high-strength steel materials, along with a lightweight body. On the other hand, the regular Xingyue has a lower safety coefficient compared to the Xingyue S.
118
Share

What type of engine oil should be used for the Mazda3 Axela?

The Mazda3 Axela comes factory-filled with 0W-20 full synthetic engine oil. This viscosity grade is optimally matched to the engine, allowing it to perform at its maximum potential. Engine oil viscosity changes with temperature fluctuations, so special attention must be paid to its performance under both low and high temperature conditions. For example, in 5W-30 oil: the first number indicates cold temperature fluidity - 5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, resulting in smoother cold starts. The second number represents the oil's kinematic viscosity at 100°C - higher values indicate better ability to maintain viscosity under high temperatures, which can be understood as providing superior lubrication performance in hot conditions. The Mazda3 Axela oil change procedure is as follows: Wait for the engine to cool down, allowing oil to drain back to the oil pan; Loosen the drain plug with a wrench and collect the old oil in a drain pan until flow stops completely. Start the engine for 30 seconds to drain remaining oil from main galleries; Remove the oil filter using a special wrench; Apply fresh oil to the new filter's gasket and hand-tighten clockwise; Add new oil through the valve cover filler port - typically about three-quarters of a standard oil container; Run the engine for 5 minutes and check for leaks at the drain plug and filter. Address any leaks if found; After stopping the engine, check the oil level using the dipstick to ensure it's within the specified range.
107
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.