What is the solution for a drooping interior rearview mirror?

Why should the left reverse parking be initiated earlier than the right?

Left reverse parking should be initiated earlier than the right because the driver's position is on the left side of the vehicle, making the pivot point for left reverse parking closer to the driver. Generally, you can turn the steering wheel fully 10cm earlier for left reverse parking compared to the right. Alternatively, you can turn when the lower edge of the left rearview mirror aligns with the stop line, observe the narrowing distance between the rear wheel and the corner of the parking space in the mirror, and return one full turn of the steering wheel when the distance reaches 30cm. Below are the evaluation criteria for reverse parking: 1. Failure to follow the prescribed route or sequence results in disqualification. 2. The vehicle body touching the line or failing to park properly results in disqualification. 3. Exceeding 210 seconds without completing reverse parking results in disqualification. 4. Stopping midway deducts 5 points each time.

9

2

Share

Will points be deducted for turning over a solid line?

Turning over a solid line with a vehicle is highly likely to result in points being deducted for violating the prohibition of marking instructions. Violating the prohibition of marking refers to actions such as driving, parking, failing to yield, or illegally occupying lanes against the marking instructions. For example, changing lanes over a solid line, making a U-turn in a section where it is not allowed, or turning in a section where turning is prohibited all constitute violations of the prohibition of marking instructions. Generally, the "violation of the prohibition of marking" refers to driving over a yellow solid line. Below are common traffic violations: 1. Running a red light: Running a red light is the most common violation. Since the new traffic regulations were introduced, running a red light results in a one-time deduction of 6 points. 2. Driving without a license: For driving during the period when the motor vehicle driver's license is temporarily suspended, a fine and 15 days of detention will be imposed. For driving without obtaining a motor vehicle driver's license or driving after the license has been revoked, 15 days of detention and a fine will be imposed. 3. Overloading or overcapacity: For passenger vehicles exceeding the rated capacity by less than 20% or freight vehicles exceeding the approved load capacity by less than 30%, a fine will be imposed. For passenger vehicles exceeding the rated capacity by 20% or freight vehicles exceeding the approved load capacity by 30%, a fine will be imposed. 4. Driving under the influence of alcohol: For driving a motor vehicle under the influence of alcohol, the motor vehicle driver's license will be temporarily suspended for 3 months, and a fine will be imposed. For driving a commercial motor vehicle under the influence of alcohol, the motor vehicle driver's license will be temporarily suspended for 3 months, and a fine will be imposed. 5. Speeding: For driving a motor vehicle exceeding the maximum speed limit by 50%, a fine will be imposed, and the motor vehicle driver's license will be revoked.

17

0

Share

Where is the Buick Regal water temperature gauge sensor located?

The water temperature gauge sensor of the Regal is located directly above the junction of the engine and transmission, on the side of the cylinder head. Damage to the water temperature gauge sensor can cause the gauge to remain at the same level, leading to incorrect judgments by the driver. A faulty water temperature sensor should be replaced promptly, as it can affect driving safety. Solutions for excessively high water temperature are as follows: 1. Insufficient coolant in the cooling system causing engine overheating: Park the car and add coolant after the engine cools down; 2. Loose or broken water pump or fan belt causing engine overheating: Visit a repair shop to replace the relevant parts; 3. Radiator guard mesh or radiator core ventilation duct blocked by debris: Resulting in poor heat dissipation and engine overheating. Replace the radiator guard or clean the debris; 4. Insufficient engine oil or substandard oil quality: Causing engine overheating. Simply replace with high-quality oil.

12

0

Share

How long does it take for a tire to bulge after rubbing against a curb?

Generally, bulging occurs when driving quickly over uneven road surfaces, and rubbing against a curb usually does not cause bulging. The following are the types of tire bulging: 1. Crown separation: The "crown" mainly manifests as delamination at the top of the tread surface (referred to as the crown). 2. Bead separation: Mainly occurs in radial truck tires. It primarily shows as separation around the rim. Issues during the bead wire closing process can cause the wire ring to crack and delaminate. The rubber around the bead wire ring may age and delaminate due to high temperatures or problems with the rubber compound itself. 3. Sidewall bulging: Mainly occurs in radial passenger car tires when driving too fast over potholes, curbs, or road debris, causing the rim and road surface to squeeze the tire sidewall, leading to broken sidewall cords and localized bulging.

18

2

Share

What is the reason why the rear light of Corolla is always on and cannot be turned off?

First, check whether the switch has been triggered, and then consider the issue of the car light circuit failure. Here is some additional information: 1. Three modes of car lights: ON is the always-on mode. When this switch is turned on, the ceiling light will stay on and will not turn off even after the car is locked. DOOR mode means the light will only turn on when the door is opened. OFF is the off mode. Selecting this mode will keep the ceiling light off and it will not light up. 2. Other reasons: If the always-on mode is accidentally activated, the rear seat light will stay on after the vehicle is turned off. If the rear seat light remains on even after the switch is turned off, it could also be due to the vehicle door not being closed properly when getting out of the car, which can cause the interior light to stay on.

17

2

Share

Should I Replace One or Both Front License Plates If One Is Lost?

If the front license plate is lost, you should replace both. Below are the functions of license plates: 1. Identifying the vehicle's region: The primary function is to determine the vehicle's region of registration. 2. Facilitating inquiries: The license plate can also be used to look up the vehicle's owner and registration details. In most countries, any vehicle driven on public roads must display license plates, with strict regulations on size, font, and color. Additionally, in some countries, motorcycles and exempted vehicles may only need to display one license plate.

12

5

Share

What is the solution for a drooping interior rearview mirror?

Why should the left reverse parking be initiated earlier than the right?

Will points be deducted for turning over a solid line?

Where is the Buick Regal water temperature gauge sensor located?

How long does it take for a tire to bulge after rubbing against a curb?

What is the reason why the rear light of Corolla is always on and cannot be turned off?

Should I Replace One or Both Front License Plates If One Is Lost?

At what age can you take the test for a Class A driver's license?

What does a yellow traffic light indicate?

What is the difference between Li and i?

What Are the Symptoms of Low Automatic Transmission Fluid?