···
Log in / Register

What is the size of the Mazda CX-5 windshield?

6Answers
Iker
09/02/2025, 02:25:17 AM

The size of the Mazda CX-5 windshield is 1450mm × 920mm. Currently, automotive windshields mainly consist of laminated tempered glass and laminated zoned tempered glass. Information about windshields is as follows: Zoned Tempered Glass: This is a new type of tempered glass that undergoes special treatment. When impacted and broken, the cracks in the glass can maintain a certain level of clarity, ensuring the driver's field of vision remains unaffected. Laminated Glass: As the name suggests, it is composed of two or more layers of glass bonded together. Its safety lies in the PVB film between the glass layers, a highly adhesive and flexible polymer material. When the glass shatters, the PVB film holds the fragments together, preventing them from scattering and causing injury, while also ensuring the driver maintains sufficient visibility to handle emergencies.

Was this review help?
112
Share
MaxRose
09/14/2025, 04:25:58 AM

I recall that the windshield size of the Mazda CX-5 is generally about 150 cm in width and 70 cm in height, but these aren't fixed numbers. There might be slight variations between different model years, such as the 2017 and 2022 versions, due to design updates affecting the dimensions. When I helped a friend repair a CX-5 before, I measured it to be roughly this size—the main purpose being to ensure smooth airflow and reduce wind resistance for better fuel efficiency. If you're planning to replace the windshield, don't just focus on the size; also consider installation details like the sealing strips to avoid leaks or noise, which can be quite annoying. I recommend checking the official repair manual online or visiting a 4S dealership for precise measurements to prevent buying the wrong part. An ill-fitting size could also impact driving safety, such as obstructing visibility, so I always advise double-checking before proceeding.

Was this review help?
11
Share
Expand All
RachelLee
10/28/2025, 10:21:22 PM

Last year, the windshield of my Mazda CX5 cracked. I measured its size to be approximately 150 cm wide and 70 cm tall. Although not officially precise, it's sufficient for daily reference. Replacing the glass cost over 2000 RMB, including labor fees. Remember to measure from edge to edge and not overlook the curved parts when taking measurements. The size matters because it affects replacement costs and driving habits. For example, a larger windshield may get bird droppings more easily, requiring frequent cleaning, while a smaller one might offer poorer visibility. As someone who drives frequently, I believe knowing the size in advance can save a lot of trouble. If you encounter small cracks, repair them promptly to prevent them from expanding, which could affect the overall body strength. For ordinary people who want to check the size themselves, I recommend asking at auto parts stores or sending the vehicle identification number to the seller for confirmation.

Was this review help?
10
Share
Expand All
McKhloe
12/11/2025, 09:33:02 PM

As a car enthusiast, I know the Mazda CX-5's windshield is typically about 150 cm wide and 70 cm tall, which is quite standard and beneficial for wind noise control. The glass design includes reinforced layers for impact resistance, with safety certifications like ECE R43 to prevent injury from shattering. While driving, I've noticed the large size provides excellent visibility, making highway driving more reassuring, but the downside is it's more prone to small chips from road debris, so I recommend getting insurance that covers windshield repairs. Remember, dimensions vary between models and model years by a few centimeters—for precise figures, always check the owner's manual or official website to avoid miscalculations.

Was this review help?
12
Share
Expand All
VeraLee
01/31/2026, 10:40:20 PM

I noticed that the Mazda CX-5 windshield measures approximately 150 cm in width and 70 cm in height, but the key point is that daily maintenance is more crucial. With such a large surface area, the glass is prone to dust accumulation or fogging, which affects nighttime driving safety. As a family vehicle, I regularly clean the glass and apply rain repellent to extend its lifespan. For precise dimensions, it's best to check online using the VIN code or have it measured at a repair shop to avoid mismatches when replacing. Additionally, size is directly linked to cost—larger glass is more expensive, with replacement fees running into thousands, so budget preparation is essential. These small tips have saved me from several hassles—safety always comes first.

Was this review help?
20
Share
Expand All
HectorDella
04/26/2026, 04:02:03 PM

When I went to repair my Mazda CX-5, the technician mentioned that the windshield dimensions are approximately 150 cm wide and 70 cm high, but the actual size might slightly vary based on vehicle configuration. I recall they used a tape measure to check from the center point to the edge, taking the curvature into account. These dimensions affect usage—for instance, winter defrosting requires more heat, so the design must be reasonable. As a novice, I recommend directly contacting an authorized dealer with your VIN number. They can confirm the exact dimensions for free, ensuring accuracy. This approach easily solves the problem without unnecessary guesswork, preventing incorrect installations that waste time and money.

Was this review help?
6
Share
Expand All
More Q&A

Is the Failure of Mercedes-Benz 48V Mild Hybrid System Common?

Mercedes-Benz 48V mild hybrid system failures are indeed common. Below is a detailed introduction to the 48V mild hybrid system: 1. Advantages: The application of the 48V mild hybrid system enables the vehicle to power higher-capacity onboard systems, drive more powerful start-stop motors, and more effortlessly rotate the engine crankshaft to wake up the engine, reducing system operation delays and jerkiness. It can also achieve more functions; some 48V systems can even temporarily take over the air conditioning when the engine is off, supplying power to the air conditioning compressor to prevent it from shutting down. Additionally, the 48V mild hybrid system can reduce energy consumption and emissions by approximately 15-20%. 2. Disadvantages: If the voltage is too high, issues such as high-voltage circuit protection, electromagnetic compatibility, and the stability of the onboard electrical system need to be considered.
116
Share

Where is the shutdown button of Xpeng Motors?

Xpeng's cars are pure electric vehicles, and Xpeng Motors does not have a shutdown button. Taking the Xpeng P7 as an example, the following is a specific introduction to the Xpeng P7: 1. Model positioning: The P7 is a pure electric mid-size car. The wheelbase of this car is 2998mm (millimeters), and the length, width, and height are 4880mm (millimeters), 1896mm (millimeters), and 1450mm (millimeters) respectively. 2. Power: The P7 has rear-wheel-drive models and four-wheel-drive models. The rear-wheel-drive model is a single-motor model, and the four-wheel-drive model is a dual-motor model. The maximum power of the single-motor model of the P7 is 196kw, and the maximum torque is 390 Nm. The total power of the dual-motor model is 316kw, and the total torque is 655 Nm. 3. Suspension type: The front suspension of the P7 uses a double-wishbone independent suspension, and the rear suspension uses a multi-link independent suspension.
110
Share

What Causes Abnormal Noise from the Rear Wheel of a Car?

The abnormal noise from the right rear wheel of a car may be caused by insufficient lubrication of the wheel hub bearing, unstable tire pressure, or aging of the shock absorber rubber sleeve. If the chassis makes unusual noises while the car is moving, it is necessary to go to a 4S shop for inspection and correction. Below is an introduction to abnormal brake noise: 1. Abnormal brake noise in a new car is normal, and the noise usually disappears after running-in for more than 200 kilometers, so there is no need to worry. 2. Replacing new friction pads or new brake discs may cause abnormal noise because the new brake discs cannot immediately achieve good run-in with the friction pads. 3. After wading through water or driving on muddy roads during off-roading, hard sand and gravel may enter the gaps in the braking mechanism, causing jamming during braking system operation and resulting in abnormal noise when they reach the gaps in the brake discs. 4. Poor fixation of the brake caliper or brake disc is another cause of abnormal brake noise and can also lead to uneven brake wear. 5. Excessive wear of the brake disc or breakage of the brake pads, even if not heavily worn, can also cause abnormal brake noise.
106
Share

What Causes the Right Rear Wheel of a Car Not to Turn?

For front-wheel-drive vehicles, the reasons for a rear wheel not turning include: 1. The brake caliper not retracting or a blocked hydraulic line. 2. The brake pads not separating or foreign objects embedded behind the brake pads. 3. A seized wheel hub bearing. For rear-wheel-drive vehicles, the reasons for a rear wheel not turning involve not only checking the braking system but also inspecting the rear axle's main reducer and differential planetary gears. Below is relevant information about car tires: 1. Replace tires when tread depth is below 1.6mm: According to national standards, the wear limit for tread depth on passenger car radial tires is 1.6mm. On the sidewall of the tire, there is a wear indicator signal mark every 30 degrees. You can compare it with a key you carry. If the groove depth is below 1.6mm, the tire should be replaced. 2. Neither underinflation nor overinflation is advisable: Incorrect tire pressure can lead to cost losses and hazards. Underinflation reduces the tire's durability, increases rolling resistance, and lowers fuel economy. Overinflation decreases traction performance, causes irregular wear, especially on the drive axle.
110
Share

Is Overtaking Allowed in a Two-Lane Tunnel?

Overtaking is not allowed in a two-lane tunnel. According to relevant regulations of the Road Traffic Safety Law: 1. Inside the tunnel: Overtaking is prohibited, and non-fault vehicles are also not allowed to park inside the tunnel. 2. Consequences: Overtaking in a tunnel on the highway may result in the suspension of the driver's license. Tunnel driving precautions are as follows: 1. Before entering the tunnel: If driving during the day, the light will suddenly dim upon entering the tunnel, and the human eye may take a short time to adapt. Therefore, the vehicle speed should be reduced about 100 meters before entering the tunnel, the distance between vehicles should be increased, and the headlights should be turned on to enter the tunnel safely at a relatively slower speed. 2. Increase the distance between vehicles: Due to the significant difference in light when entering and exiting the tunnel, the vision may be temporarily blinded, leading to an instinctive brake application. Moreover, the following vehicle may also be entering a state of blindness, so maintaining a greater distance between vehicles is essential for safety. 3. Do not switch between high and low beams: Inside the tunnel, the contrast between the light inside and outside the tunnel is significant. Using high beams can increase the risk of danger. 4. Do not change lanes: Due to poor lighting inside the tunnel, especially at the exit, and typically only two or three lanes, changing lanes inside the tunnel is strictly prohibited. 5. Do not exceed the speed limit: Tunnels usually have strict speed limits, even on highways. Speed limit signs are prominently displayed before entering the tunnel, and some tunnels also have speed limit reminders inside.
113
Share

Where are the drain holes on the Avalon's doors?

Detailed introduction is as follows: 1. Drain holes: The Avalon has three drain holes at the bottom of each door, located inside the sealing strip. Two of these drain holes are already open and do not require manual opening, while the third one is blocked with a rubber plug, which can be removed by hand. 2. Timely cleaning: Each door typically has more than two drain holes, usually located at the lower part of the door panel. If these are not cleared, water can accumulate inside the door, leading to rust over time. Additionally, the door contains various components, including the window regulator and wiring for the car audio system, which can be damaged if exposed to water. Since the drain holes on the door are positioned low, they can easily get clogged with mud when driving on muddy roads. Therefore, it is essential to clean the door drain holes promptly. 3. Important notes: There are several other drain holes on the car that require attention, such as the air conditioning drain hole, engine compartment drain hole, sunroof drain hole, trunk drain hole, and fuel tank cap drain hole.
111
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.