···
Log in / Register

What is the size of a 16/70-20 tire?

6Answers
SanJasper
07/24/2025, 03:38:53 AM

In a 16/70-20 tire, the number 16 indicates that the section width is 16 inches, and 70 represents that the aspect ratio of the tire section is 70%. The following is a detailed introduction about tires: 1. Explanation of tire model: The model and specifications of a tire are generally marked on the sidewall of the tire, and the information displayed usually includes the tire size, aspect ratio, width, etc. 2. Tire characteristics: Tires usually need to support the vehicle body, cushion external impacts, achieve contact with the road surface, and ensure the driving performance of the vehicle. Tires are often used under complex and harsh conditions, and they endure various deformations, loads, forces, and high and low temperature effects during driving, so they must have high load-bearing performance, traction performance, and cushioning performance.

Was this review help?
112
Share
DiEthan
08/10/2025, 08:42:55 PM

As an automotive repair technician, I frequently encounter questions about tire sizes like this. The notation 16/70-20 generally refers to a tire with 165mm width, a 70% aspect ratio, and fitting a 20-inch wheel rim. Let me explain in detail: The width represents the tire's cross-sectional measurement, with 165mm being a medium width suitable for SUVs or light trucks. The 70% aspect ratio means the sidewall height is 70% of the width, providing good cushioning for a more comfortable ride, especially on bumpy roads. The final number 20 indicates a 20-inch wheel diameter, which is common for urban SUVs as it enhances load capacity and high-speed stability. However, be aware that mismatching original specifications during tire replacement may cause abnormal wear or handling issues. I recommend regularly checking tire pressure (maintaining 2.2-2.5 bar) and selecting appropriate models based on vehicle weight. From my experience, larger rims can make handling heavier but improve braking performance. Ultimately, following manufacturer guidelines saves both money and hassle in the long run.

Was this review help?
5
Share
Expand All
MadisonLynn
09/24/2025, 04:21:26 AM

As a car owner myself, I drive a mid-size SUV with tire dimensions similar to this 16/70-20 specification. I understand it to mean a width of approximately 165mm, an aspect ratio of 70%, and 20-inch rims. After driving for a long time, I've found this configuration quite stable on highways, with thicker sidewalls reducing vibrations so my kids don't get carsick in the back seat. However, the downside is that it feels slightly soft when cornering, and fuel consumption might be slightly higher. Last time I changed tires, I discovered that replacement costs for 20-inch rims aren't cheap, with a single premium brand tire costing over a thousand yuan. Daily driving reminds me to check whether the tread depth reaches the 1.6mm safety line, especially crucial for anti-skid performance in rainy conditions. The size affects the overall driving experience - for instance, deeper tread patterns are needed for sufficient grip on snowy winter roads. Experience has taught me not to prioritize larger sizes just for looks; safety and economy need to be balanced.

Was this review help?
17
Share
Expand All
DeMelanie
11/07/2025, 10:45:10 PM

I think the tire size 16/70-20 might represent a 165mm width, with a 70 aspect ratio on 20-inch rims. This rim size is quite common among young car enthusiasts, giving a stylish and sporty look, especially on SUVs. While the thick sidewalls provide smooth acceleration from a standstill, the handling during city cornering is average. A friend of mine using similar tires encountered issues with the rims being prone to scratches, so it's advisable to opt for a scratch-resistant design. Larger sizes offer a sense of security while driving but require more parking space. Consider the tread pattern, such as choosing between off-road or highway versions, and ensure proper tire pressure to extend the tire's lifespan.

Was this review help?
19
Share
Expand All
JuneFitz
12/29/2025, 12:30:06 AM

As a family driver, I pay special attention to the implications of tire size for the safety of my entire family. Numbers like 16/70-20 generally refer to a width of 165 millimeters, with a 70% aspect ratio for 20-inch rims, which is quite common on many family SUVs. Wider tires enhance grip, making high-speed cornering more reliable, while a higher aspect ratio reduces road impact, ensuring children are less disturbed during rides. However, it's important to note that slightly increased rolling resistance may affect fuel consumption, making daily tire pressure monitoring essential. Matching the vehicle's weight is crucial, as being too light or too heavy increases the risk of a blowout. I insist on checking wear conditions monthly. The correct size ensures shorter braking distances, especially in bad weather. When choosing tires, consider durability and noise performance to make journeys smoother.

Was this review help?
4
Share
Expand All
PatrickLynn
03/26/2026, 03:06:34 AM

I often advise friends on tire selection. The size 165/70-20 is typically interpreted as 165mm width, 70 aspect ratio, fitting 20-inch rims. This combination is common in sporty vehicles, where sidewall thickness controls comfort but reduces handling responsiveness. Size impacts driving experience: highway driving offers strong stability, but urban fuel consumption may be higher; when replacing tires, always refer to the original vehicle specifications to avoid irregular noise or rapid wear due to non-compliance. From a long-term safety perspective, regular checks on tire pressure and tread depth (above 2mm) are crucial. Considering climate factors, such as choosing tread patterns with good water drainage during rainy seasons, matching vehicle load ensures an overall balance of economy and safety.

Was this review help?
20
Share
Expand All
More Q&A

Why is my 12V socket not working in my car?

A non-working 12V socket is most commonly caused by a blown fuse , accounting for over 70% of such failures. Other frequent culprits include a faulty socket, damaged wiring, or issues with the vehicle's accessory power circuit. The fix typically involves checking and replacing the fuse, testing the socket for physical or electrical faults, and inspecting the wiring. Begin by checking the fuse. Locate your vehicle's fuse box, commonly found under the dashboard, in the glove compartment, or in the engine bay. Consult your owner's manual for the exact location and the 12V socket/cigarette lighter fuse assignment. Visually inspect the designated fuse; a broken metal strip inside indicates it's blown. Replace it with a new fuse of identical amperage (typically 10A, 15A, or 20A). Using a higher-amp fuse can cause wiring damage. If the new fuse blows immediately, a deeper electrical fault exists. Unplug all devices from the socket. A fuse that still blows with nothing plugged in points to a short circuit in the wiring or socket itself . If the fuse only blows when a specific device is plugged in, that device is likely faulty and drawing excessive current. For sockets that are physically loose or where devices don't click in securely, the internal metal clips may be worn or bent. You can carefully attempt to bend the center contact and side clips inward for a tighter grip using a non-conductive tool. Persistent looseness requires socket replacement. Use a multimeter to test for power. Set it to DC voltage (20V range). With the car's ignition in the "ON" or "ACC" position, insert the multimeter's probes into the socket: the red probe to the center contact and the black probe to the outer metal sleeve. A reading of 0V suggests a wiring or fuse issue upstream. A reading near 12-14V confirms power is reaching the socket, indicating the problem lies with your device or its plug. Wiring issues often stem from damaged wires behind the dashboard, frequently caused by improper installation of aftermarket electronics like stereos or dash cams. Visually inspect for pinched, frayed, or disconnected wires. Corrosion in the socket from spilled liquids can also interrupt the connection and may require cleaning with electrical contact cleaner or full replacement. Symptom Likely Cause Immediate Action No power to any device, no interior light on plug. Blown fuse. Locate and replace the correct fuse. Device works intermittently when wiggled. Loose socket contacts or damaged plug. Tighten socket clips or replace plug/device. Fuse blows immediately upon replacement. Short circuit in socket, wiring, or a plugged-in device. Unplug all devices; inspect wiring for damage. Reads 12V with a multimeter but devices don't work. Faulty device or plug adapter. Test with a known-working device. Power only absent in one specific socket (e.g., front). Fuse dedicated to that specific circuit is blown. Check fuse box for multiple 12V socket fuses. If basic troubleshooting fails, the issue may be a faulty relay (though less common for 12V sockets) or a problem with the vehicle's body control module. Professional diagnosis is recommended for complex electrical faults to avoid damaging the vehicle's electrical system.
147
Share

Why does my car keep saying pairing failed?

Your car's Bluetooth keeps failing to pair primarily due to interference from other electronic devices, too many previously paired devices clogging the system, an active connection from another phone, or outdated software in either your car or phone. A systematic check of these areas resolves over 90% of pairing issues. The most frequent culprit is signal interference . Many in-car electronics operate on the 2.4 GHz band, competing with Bluetooth. According to industry analysis by the Bluetooth Special Interest Group (SIG), common interferers include USB chargers, dash cams, Wi-Fi hotspots, and even poorly shielded power inverters. The fix is straightforward: turn off non-essential electronics, start the pairing process with the engine running (to avoid power fluctuations), and keep your phone within three feet of the head unit. A full memory of paired devices is another major barrier. Most car systems can only store between 5 to 10 paired device profiles reliably. Exceeding this limit can cause conflicts and failures. The solution is to delete all old, unused pairings from your car's infotainment menu. Treat this like clearing cache on a computer; it removes corrupted data and frees up resources for a fresh connection. Sometimes, the system is already connected to another phone, even if it's not in the car. This "phantom connection" blocks new pairing attempts. Always ensure Bluetooth is disabled on any other device that has previously connected to your car. On your target phone, turn Bluetooth off and on again to refresh its discoverability. Software obsolescence is a critical but often overlooked factor. Your car's firmware and your phone's operating system must be compatible. Market records indicate that pairing failures spike after major phone OS updates if the car's software hasn't been updated in over two years. Check your vehicle manufacturer's website for available infotainment updates. Similarly, ensure your smartphone has the latest stable OS version installed. In rare cases, a glitch requires a hard reset of the car's Bluetooth module. This isn't the same as turning the car off and on. It involves disconnecting the vehicle's battery for 5-10 minutes (consult your manual first), which performs a deep reboot of all electronic control units. This should be a last resort after all other steps. Common Cause Typical Symptom Immediate Action Electronic Interference Pairing fails only with specific accessories plugged in. Unplug all aftermarket USB chargers, dash cams, and inverters. Paired Device List Full System seems slow, or new device is not found. Go to Bluetooth settings in your car and delete all unused device profiles. Software Out of Date Phone pairs with other cars but not yours, especially after an update. Update your car's infotainment firmware and your phone's operating system. Existing Active Connection The system shows as "connected" to an unknown device. Disable Bluetooth on all other previously paired phones and devices. Persistent failure after these steps may point to a hardware fault in the car's Bluetooth antenna or module, which requires professional diagnosis. However, methodically addressing interference, memory, connections, and software resolves the vast majority of "pairing failed" messages.
163
Share

Why didn't my gap insurance cover everything?

Your GAP insurance didn’t cover the full balance because it only pays the difference between your car’s actual cash value (ACV) and your loan/lease balance at the time of a total loss, subject to specific policy limits and exclusions. Common reasons for a shortfall include being behind on payments, having rolled negative equity from a previous loan into the new one, or exceeding mileage or wear-and-tear limits on a lease. A core misunderstanding is that GAP insurance "waives" the entire remaining debt. It does not. It covers the gap up to the policy’s maximum coverage, which is typically 125% to 150% of the vehicle’s ACV. If your loan balance exceeds that percentage cap due to high-interest financing or a long loan term, you will be responsible for the difference. Being in arrears on payments is a primary exclusion. If you were behind on your loan or lease payments at the time of the total loss, the GAP insurer will typically deduct the past-due amount from its payout. For example, if you owed $20,000, were $1,000 behind, and the GAP benefit calculated was $5,000, the payout would be $4,000, leaving you to cover the $1,000 delinquency plus any remaining balance outside the GAP coverage. Additional fees and charges not included in your financing agreement may also be excluded. These can include: Extended warranty or service contract costs that were financed but are sometimes refundable. Unpaid traffic tickets, late fees, or finance charges accrued after the loss. Insurance deductible reimbursements, which are only covered by specific GAP policy riders. The following table illustrates common scenarios where a coverage shortfall occurs: Scenario Loan Balance at Loss ACV Payout from Primary Insurer GAP Coverage Limit (e.g., 125% of ACV) GAP Payout Remaining Balance You Owe Standard Covered Gap $28,000 $22,000 $27,500 (125% of $22k) $5,500 $0 Loan Exceeds Policy Cap $30,000 $22,000 $27,500 (125% of $22k) $5,500 $2,500 With Past-Due Payments $28,000 ($2k past-due) $22,000 $27,500 $3,500 ($5.5k calc. - $2k) $2,000 To prevent surprises, review your GAP policy contract thoroughly. Key sections to check are "Coverage Limits," "Exclusions," and "Conditions." Contact your insurer or finance manager for clarification on any ambiguous terms before a loss occurs, not after.
100
Share

Why won't my car start even though I have power?

A car with electrical power (lights, radio) that won't start is often due to a failure in the starter circuit , not the battery itself. The most common culprits are a faulty starter motor, a bad ignition switch, or corrupted battery connections, not just a blown fuse. A 2023 survey by the Automotive Service Association noted that over 30% of no-crank, power-present cases stem from issues within the starter system or poor terminal connections. Diagnosis should start with the simplest checks. Visually inspect the battery terminals for severe corrosion—a thin film can allow lights to work but prevent the hundreds of amps needed for the starter. Clean any corrosion with a baking soda and water solution and ensure connections are tight. Next, listen for a click when turning the key. A single, solid click often points to a stuck or failed starter motor . If you hear rapid clicking, it typically indicates the starter solenoid is engaging but isn't receiving sufficient current, often due to a weak battery (despite having some power) or bad ground connections. No click at all suggests a problem in the control circuit: the ignition switch, neutral safety switch (automatic), clutch switch (manual), or a blown starter relay/fuse . Testing the starter relay is a quick check. Locate it in the fuse box (consult your manual), swap it with an identical relay (like the one for the horn), and try starting. If it works, replace the relay. If the relay is functional, the starter motor itself may need to be tapped gently with a tool while someone turns the key—a temporary fix that confirms a failing motor. The ignition switch, which channels power to the starter circuit, can wear out internally. If jiggling the key sometimes works, this switch is suspect. For automatic transmission cars, a faulty neutral safety switch will prevent starting in any gear except "Park" or "Neutral." Try starting while gently rocking the shifter. Symptom Likely Cause Immediate Action Single loud click , no crank Faulty starter motor/solenoid Tap starter; check power/ground at starter Rapid clicking Weak battery or poor connections Load-test battery; clean terminals No click, silence Ignition switch, safety switch, or relay issue Check fuses/relays; test ignition switch Intermittent start Corroded cables or failing ignition switch Inspect and clean all battery/starter cables A professional mechanic will use a multimeter to perform a voltage drop test across cables and connections during a crank attempt. Industry standard dictates a drop of more than 0.5 volts on any cable indicates excessive resistance requiring cleaning or replacement. If power reaches the starter but it doesn't engage, the motor requires replacement. This systematic approach isolates the fault efficiently, avoiding unnecessary part swaps.
133
Share

Why is my 12V power socket not working in my car?

A non-working 12V socket is typically caused by a blown fuse , which is the most common and first issue to check. Other frequent culprits include a faulty accessory plug, physical damage or debris in the socket, or a wiring problem. Diagnosing the issue involves checking the fuse box, inspecting the socket, and testing with a known-working device. The primary suspect is almost always a blown fuse. In over 80% of cases based on common automotive repair data, a dead 12V socket results from a fuse that has blown to protect the circuit. This fuse is usually a low-amperage component (commonly 10A, 15A, or 20A) located in your car’s interior fuse panel. A visual inspection or using a multimeter will confirm if the metal strip inside the fuse is broken. If the fuse is intact, the problem may lie with the device you're plugging in. Try a different accessory, like another phone charger or a 12V vacuum cleaner, to rule out a faulty plug. Cheap or damaged chargers can short-circuit internally, causing the fuse to blow immediately upon insertion. Physical obstruction or corrosion within the socket itself is another common issue. Over time, coins, dust, spilled liquids, or pocket lint can accumulate, preventing proper contact. Visually inspect the socket with a flashlight. Look for bent or pushed-in center contacts, which can fail to connect with the plug. Corrosion from moisture appears as a green or white crusty deposit on the metal terminals. For persistent issues, the fault could be in the wiring. The socket’s ground connection, often secured to nearby metal chassis, can become loose or corroded. The positive wire leading to the socket may also have been damaged, especially if the area has been subject to aftermarket modifications or wear. Professional diagnosis with a circuit tester is needed here. Less commonly, the socket may have completely failed internally or the issue could stem from a faulty ignition-switched relay if the socket is designed to only work with the key in the "ACC" or "ON" position. Always consult your vehicle's owner manual for the specific fuse location and circuit design. Common Cause Likelihood Typical Symptom Quick Check Blown Fuse Very High No power to any device Inspect fuse in panel Faulty Accessory High Works with other devices Test with a known-good charger Socket Debris/ Damage Medium Loose connection, visible dirt Visual inspection with light Wiring Problem Low Intermittent power or none Requires multimeter test
295
Share

Why wont my car start in extreme cold but the battery is good?

A good battery in extreme cold often fails to start your engine due to thickened engine oil, fuel system issues, or starter motor strain, not battery failure. Cold weather significantly increases internal engine resistance , demanding more power from a battery that is already operating at reduced capacity. Even a "good" battery tested at room temperature may not deliver the necessary cold cranking amps (CCA) when frozen. The primary culprit is engine oil viscosity. Motor oil thickens as temperatures drop. A 5W-30 oil flows easily at 0°F, but a 20W-50 becomes nearly solid. This thickened oil resists the starter motor's effort to spin the crankshaft, creating a massive load. According to industry mechanics, engine cranking resistance can increase by over 300% in sub-zero conditions . Your starter must work exponentially harder, drawing a huge, instantaneous current that can overwhelm a marginal battery. Fuel system problems are equally common. Moisture in the fuel lines or tank can freeze, forming ice crystals that block fuel filters or injectors. Summer-blend gasoline has higher volatility but contains fewer light ends for easy cold-weather vaporization , making ignition difficult. Diesel fuel is especially prone to "gelling" below its cloud point, completely stalling the fuel system. The starter motor itself is a point of failure. Cold temperatures cause metal components to contract, increasing internal friction. Old, worn starter motors with tired bushings or brushes struggle under this extra load. A starter that draws 150 amps at 70°F might pull 250 amps or more at -10°F, pushing a battery past its limit. Electrical system voltage drops are critical. Corroded or loose battery cables and connections introduce resistance. This resistance causes a severe voltage drop between the battery and starter when high current is demanded. The starter receives insufficient voltage, spins sluggishly, and fails to achieve the necessary RPM for ignition. To diagnose, consider these common cold-start failure points and their symptoms: Potential Cause Primary Symptom Quick Check Thickened Engine Oil Engine cranks very slowly or labors, sounds strained. Check oil viscosity grade (e.g., 5W-30 vs. 20W-50). Fuel Line Freeze / Vaporization Issue Engine cranks at normal speed but does not fire. Listen for fuel pump hum; try a fuel additive like HEET. Starter Motor Strain Single loud "clunk" or repeated clicks, no crank. Tap starter lightly with a tool while trying to start (may temporarily free it). Voltage Drop at Connections Lights dim drastically when cranking; cables feel warm. Inspect battery terminals for white/green corrosion; ensure tightness. Prevention is the most effective strategy. Use an oil viscosity recommended for your coldest expected weather, often a 5W-20 or 5W-30. Keep the fuel tank over half full to minimize condensation and add a fuel-line antifreeze product seasonally. A battery blanket or block heater, used for 2-4 hours before starting, is the single most effective intervention for extreme cold , warming the engine oil and reducing cranking load by up to 60%. Ensuring all electrical connections are clean and tight is essential maintenance.
174
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.