What is the reason for the three ABS warning lights on the Volkswagen Sagitar?

2 Answers
RowanLee
09/07/25 3:12am
If the ABS warning light on the Volkswagen Sagitar remains illuminated, it indicates that the electronic control unit has detected a fault that is detrimental to the normal operation of the anti-lock braking system. Here is some relevant knowledge about ABS: 1. The self-test process of ABS: For vehicles equipped with an anti-lock braking system (ABS), when the ignition switch is turned to the "ON" position, the ABS warning light on the dashboard will illuminate for 3 to 6 seconds. This is the self-test process of the ABS and is a normal phenomenon. Once the self-test process is completed, if the ABS is functioning properly, the warning light will turn off. 2. The function of ABS: ABS prevents wheel lock-up by calculating the vehicle's slip rate and controlling it near the peak adhesion coefficient, which is a form of passive safety control.
Was this review help?
2
5
Share
GavinRose
09/19/25 2:41am
I've been driving a Volkswagen Sagitar for ten years, and that time when the three ABS warning lights suddenly came on, it really made my heart skip a beat. The causes are often complex, with the most common being wheel speed sensor issues, such as the sensor getting dirty or flooded, preventing data from reaching the ABS module. In my car, the sensor was clogged with mud, and even after cleaning, the light remained on. Later, a professional inspection revealed damage to the control module. Aging wiring can also cause short circuits, while fuse blowouts are more common when there's excessive current. ABS faults shouldn't be taken lightly, as they can affect braking efficiency and increase the risk of accidents in rain or snow. It's advisable to pull over immediately if a problem is detected and call for a tow truck to take the car to a professional repair shop. Regularly cleaning around the wheels can help reduce such risks—after all, safety comes first.
Was this review help?
12
2
Share
Expand All
More Forum Discussions

Is the Infiniti QX50 a domestically produced car?

Infiniti QX50 is a domestically produced car, and it is a mid-size SUV. Taking the 2020 Infiniti QX50 as an example, its body dimensions are: length 4705mm, width 1903mm, height 1681mm, wheelbase 2798mm, fuel tank capacity 60L, and curb weight 1788kg. The 2020 Infiniti QX50 features a MacPherson independent front suspension and a multi-link independent rear suspension. It is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 245PS, maximum power of 180kW, maximum torque of 380Nm, and is paired with an 8-speed continuously variable transmission.
9
2
Share

Where is the headlight switch on the BORGWARD BX5?

BORGWARD BX5's headlight switch is located on the lever-type switch to the left of the steering wheel. High beams can be used when there are no street lights or when the road is straight and visibility is poor. Taking the 2020 BORGWARD BX5 as an example, it is a compact SUV with body dimensions of 4490mm in length, 1877mm in width, and 1675mm in height, a wheelbase of 2685mm, a fuel tank capacity of 60 liters, and a curb weight of 1525kg. The 2020 BORGWARD BX5 features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 2.0L turbocharged engine producing a maximum horsepower of 150PS, a maximum power of 110kW, and a maximum torque of 250Nm, paired with a 6-speed automatic transmission.
7
2
Share

What is the oil capacity for the Highlander 2.0T?

The oil capacity for the Highlander 2.0T is 4.2 to 4.6 liters. The specific amount of oil to be added can be determined based on the vehicle's user manual and the actual remaining oil level in the engine. Taking the 2021 Highlander as an example, it belongs to the mid-size SUV category, with body dimensions of: length 4890mm, width 1925mm, height 1720mm, wheelbase of 2790mm, fuel tank capacity of 72.5 liters, and a curb weight of 1910kg. The 2021 Highlander features a MacPherson strut front suspension and an E-type multi-link rear suspension. It is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 220PS, maximum power of 162kW, maximum torque of 350Nm, paired with a 6-speed automatic transmission.
6
4
Share

What are the reasons for the decrease in car antifreeze?

The reasons for the decrease in car antifreeze are: under continuous high temperature, the engine will evaporate the antifreeze. The functions of car antifreeze are: 1. to provide anti-corrosion protection for the engine's cooling system; 2. to prevent the engine temperature from reaching 100 degrees Celsius and causing the water to boil; 3. to prevent the formation of scale, avoiding the reduction of the radiator's cooling effect; 4. to ensure the engine operates normally under low temperatures. The method to replace antifreeze is: 1. open the vehicle's engine hood, and the coolant reservoir can be seen in the upper right corner; 2. open the antifreeze plug under the radiator to drain the old antifreeze; 3. add new antifreeze, tighten the cap, and the antifreeze replacement is complete.
7
5
Share

What are the differences between the Camry 2.0s and 2.0g?

The differences between the Camry 2.0s and 2.0g are: 1. Different body lengths: The Camry 2.0s has a body length of 4900mm; the Camry 2.0g has a body length of 4885mm. 2. Different wheelbases: The Camry 2.0s has a front wheelbase of 1575mm and a rear wheelbase of 1585mm; the Camry 2.0g has a front wheelbase of 1585mm and a rear wheelbase of 1595mm. 3. Different curb weights: The Camry 2.0s has a curb weight of 1570kg; the Camry 2.0g has a curb weight of 1555kg. 4. Different tire specifications: The Camry 2.0s has tire specifications of 235/45r18; the Camry 2.0g has tire specifications of 215/55r17.
20
1
Share

What are the precautions for driving in heavy rain?

Precautions for driving in heavy rain include: 1. Maintain a safe distance: When driving in rainy conditions, prioritize stability by keeping a safe distance from the vehicle ahead. Avoid excessive speed and always pay attention to the speed and direction of the vehicle in front to prevent rear-end collisions. Due to reduced visibility during rain, avoid accelerating to overtake, as it may be too late to prevent accidents like rollovers. 2. Avoid skidding: In heavy rain, the road surface becomes slippery, reducing the friction coefficient between truck tires and the road, which increases braking distance and makes skidding more likely. If the vehicle starts to skid, avoid slamming on the brakes or turning the steering wheel abruptly to prevent side skidding. Drivers should maintain a straight and low-speed course in rainy conditions, and when encountering turns, apply the brakes gently to prevent the tires from locking up and causing the vehicle to skid.
16
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.