What is the reason for the rear seat vibration in Song Plus DMI?

How to Deal with Black Paint Scratches on a White Car?

When black paint gets scratched onto a white car, the specific situation and solutions are as follows: 1. Dirt adhesion: If the black marks are merely dirt adhering to the paint surface, simply washing and wiping them off will suffice. 2. Exposed primer: If the scratch has removed the surface paint of the car, in minor cases, you can use a touch-up pen to repair it yourself. For more severe cases, sandpaper can be used to sand off the paint at the scratched area, followed by repainting. 3. Deformation: If the impact is particularly severe and causes deformation of vehicle parts, it is necessary to visit a 4S shop or repair shop for professional repair by specialists.

15

0

Share

What Causes the Anti-Slip Warning Light to Illuminate?

Main reasons for the anti-slip light illumination: 1. Accidental pressing of the ESP OFF button, manually deactivating the anti-slip system. 2. Software issues causing poor signal transmission. 3. Fuse blown or circuit short. 4. Poor contact or malfunction at sensor interfaces. 5. ABS pump failure. There are two methods to clear the anti-slip light: 1. Restart the engine and briefly press the ESP OFF button to check if the anti-slip system was manually deactivated. 2. Visit a 4S dealership for inspection, diagnose the fault cause, and use a diagnostic scanner to clear the trouble codes after repair.

19

4

Share

How to open the fuel tank cap of Buick GL8?

Buick GL8's fuel tank switch is located under the driver's seat in the main cockpit. Simply pull the switch outward by hand to open the fuel tank cap. More information about Buick GL8 is as follows: 1. Buick GL8 is positioned as a medium-sized MPV, and all models meet the China VI B emission standards. 2. In terms of power, Buick GL8 is equipped with a 2.0-liter inline 4-cylinder turbocharged engine, matched with a 6-speed automatic manual transmission, with a maximum power of 191KW and a maximum torque of 350N·m. The fuel supply method is all direct injection.

6

4

Share

Is removing a tire clockwise or counterclockwise?

Removing a tire is counterclockwise, while installing a tire is clockwise. When tightening the wheel nuts onto the studs, it's not about the depth but rather the torque value. Different specifications and grades of bolts and nuts have specified torque range values. Simply tighten according to the bolt's grade, and the vehicle can operate normally. Tires are circular elastic rubber products assembled on various vehicles or machinery for ground rolling, typically mounted on metal rims. They support the vehicle body, cushion external impacts, ensure contact with the road surface, and maintain the vehicle's driving performance. Tires are often used under complex and harsh conditions, enduring various deformations, loads, forces, and temperature extremes during operation. Therefore, they must possess high load-bearing capacity, traction performance, and cushioning properties.

19

4

Share

What does car cornering light mean?

Car cornering lights refer to the feature where the vehicle's headlights (or fog lights) can rotate a certain angle in the direction of the turn to expand the field of vision. Standard headlights have blind spots during turns, making pedestrians in these areas difficult to notice and potentially leading to hazards. This equipment primarily enhances nighttime driving safety. There are two common types of cornering auxiliary lighting: one is fog light-assisted steering, where the fog light on the same side illuminates when the headlights are on and the vehicle is turning, and automatically turns off when the turn is completed. The other is dynamic headlights, which adjust their angle based on the vehicle's turning direction to ensure safety in blind spots during curves.

10

1

Share

How to Identify Run-Flat Tires on the Tire?

There are two methods to distinguish run-flat tires: 1. Sensory identification. Generally, the sidewalls of run-flat tires are harder, while those of regular tires are softer. However, this method is not highly accurate and is more suitable for comfort-type tires. For wear-resistant tires, the sensory difference is not obvious. 2. Run-flat tires usually have a run-flat mark on the sidewall, which regular tires lack. The run-flat mark is typically RSC, but it may vary by brand. For example: Bridgestone uses RFT, Pirelli uses R-F, Continental uses SSR, Michelin uses ZP, and Dunlop uses ROF. This is a more accurate and convenient identification method.

4

Share

What is the reason for the rear seat vibration in Song Plus DMI?

How to Deal with Black Paint Scratches on a White Car?

What Causes the Anti-Slip Warning Light to Illuminate?

How to open the fuel tank cap of Buick GL8?

Is removing a tire clockwise or counterclockwise?

What does car cornering light mean?

How to Identify Run-Flat Tires on the Tire?

Should the Changan Eado use 92 or 95 octane gasoline?

What are the test items for the automatic transmission vehicle in Subject 2?

Does the Elysion have a hybrid version?

What are the symptoms of a bad CV joint?