···
Log in / Register

How to Deal with Black Paint Scratches on a White Car?

1Answers
Alex
07/29/2025, 01:36:13 PM

When black paint gets scratched onto a white car, the specific situation and solutions are as follows: 1. Dirt adhesion: If the black marks are merely dirt adhering to the paint surface, simply washing and wiping them off will suffice. 2. Exposed primer: If the scratch has removed the surface paint of the car, in minor cases, you can use a touch-up pen to repair it yourself. For more severe cases, sandpaper can be used to sand off the paint at the scratched area, followed by repainting. 3. Deformation: If the impact is particularly severe and causes deformation of vehicle parts, it is necessary to visit a 4S shop or repair shop for professional repair by specialists.

Was this review help?
115
Share
More Q&A

What to Do When the Battery of a Magotan Car Dies?

You can start the car by jump-starting it with another vehicle or have it towed to a repair shop for charging. Alternatively, you can use a portable charger to charge the car battery on-site. Below are some related details: 1. Magotan: The Volkswagen Magotan is derived from the Future B6, which is closely related to the Passat B6. It is the first B-segment sedan to be produced and sold by FAW-Volkswagen since its establishment. According to FAW-Volkswagen, "Ma" symbolizes confidence, decisiveness, and dynamism, while "gotan" represents soaring, surpassing, and passion. 2. Battery: A car battery, also known as a storage battery, is a type of battery that converts chemical energy into electrical energy. The commonly referred-to car battery is a lead-acid battery, which primarily uses lead and its oxides as electrodes and a sulfuric acid solution as the electrolyte.
105
Share

What three photos are needed for crossing the yellow line?

Crossing the yellow line requires violation photos, license plate recognition photos, and panoramic photos. Below is the relevant introduction about photos for crossing the yellow line: 1. Three photos are required for crossing the yellow line: (1) First photo: When the front wheels of the vehicle pass over the induction coil of the solid line on the ground, the automatic recognition system of the electronic eye will capture the violation of crossing the line. (2) Second photo: When the vehicle continues to drive over the solid line on the ground, and the body crosses further. (3) Third photo: When the vehicle successfully changes lanes by crossing the solid line or continues to drive forward while crossing the line. 2. The photos are taken by electronic eyes: The electronic eye will take three photos, one is the instant violation photo, another is the license plate recognition photo, and the last one is the panoramic photo. The electronic eye for capturing line-crossing is different from the one for capturing red-light running, which requires capturing the opposite intersection to count as three photos. For line-crossing, three photos taken at once are sufficient for evidence collection.
101
Share

What is the fuel tank capacity of the ASX?

The fuel tank capacity of the Mitsubishi ASX is 63 liters, as officially announced. Owners who have purchased the Mitsubishi ASX can also check this information on the vehicle's configuration sheet. The Mitsubishi ASX requires 92-octane fuel, with a fuel consumption of 6.6 to 7.3L per 100 kilometers. A full tank can provide a driving range of 863 to 955 kilometers. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when there are 2 segments remaining to avoid running out of fuel midway. During actual refueling, the amount of fuel added may exceed the marked capacity. This is because the fuel tank capacity marked by the manufacturer is measured from the bottom of the tank to the safe fill level. There is additional space from the safe fill level to the tank opening, which is designed to allow for fuel expansion due to temperature increases without causing overflow. If fuel is added up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
103
Share

What is the fuel tank capacity of the Jetta VS7 in liters?

The fuel tank capacity of the Jetta VS7 is 51 liters, as officially announced. Owners who have purchased the Jetta VS7 can also check this information on the vehicle's configuration sheet. The Jetta VS7 requires 95-octane fuel, with a fuel consumption of 6.2 to 6.8L per 100 kilometers. A full tank can cover a distance of approximately 750 to 823 kilometers. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically done by observing the fuel gauge inside the vehicle. Under normal circumstances, the fuel level will be accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel midway. During actual refueling, the amount of fuel added may exceed the marked capacity. This is because the manufacturer's specified tank capacity is measured from the bottom of the tank to the safe fill level, and there is additional space from the safe fill level to the tank opening. This extra space is designed to accommodate fuel expansion due to temperature increases, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
120
Share

What is the English logo of the Tayron?

The English logo of the Tayron is TAYRON. Below is a related introduction to the Tayron: 1. Exterior Design: The Tayron is an SUV model under FAW-Volkswagen. It is based on the European version of the Tiguan and comes from the Volkswagen MQB A2 platform. In terms of appearance, the Tayron adopts Volkswagen's new family-style design language, which has gradually been introduced in several new models under the Volkswagen brand. Compared to the previous Volkswagen family design, the Tayron appears more youthful and stylish. The front face features a horizontal grille, paired with LED headlights on both sides, effectively extending the horizontal visual width. The waistline extends from the headlights to the rear taillights, and the rear design is rounded and bold, with the vehicle's robust lines creating a muscular feel. 2. Configuration: In addition to conventional features such as a 360° panoramic camera, the third-generation intelligent parking assist system, and blind spot detection, the Tayron is also equipped with the TJA traffic jam assist system. Through the combination of ACC 3.0 adaptive cruise and Lane Assist lane keeping, it achieves L2-level autonomous driving functionality, significantly reducing driver fatigue. The vehicle is equipped with the 4MOTION intelligent four-wheel drive system, allowing seamless switching between 4 road modes, 2 off-road modes, and 1 snow mode.
102
Share

Can You Still Drive When the Water-Fuel Separator Alarm Goes Off?

When the water-fuel separator alarm is triggered, the cause should be investigated. If it's due to water accumulation, you can continue driving, but for other reasons, repairs are needed before driving. Reasons for the water-fuel separator alarm: Flashing state: The water-fuel separator is installed on a bracket near the fuel tank of the car. It separates water from fuel by utilizing the density difference between water and oil, filtering moisture from the fuel. When the moisture content in the fuel filter exceeds the limit, the water-fuel separator cannot function properly. Steady light state: A malfunction in the sensors related to the water-fuel separator causes it to stop operating due to the inability to transmit the working status normally. A faulty water-fuel separator prevents the proper removal of water during fuel combustion, which can easily lead to abnormal operation of the fuel injectors. This may result in unstable engine acceleration, lack of power, black smoke emissions, white smoke from the engine, and severe carbon buildup. Solutions: When the water-fuel separator warning light is on, you can open the drain valve under the separator's liquid storage tank to release the water. As the liquid level drops below the sensor, the indicator light will naturally turn off. If the warning light remains on after draining the water from the storage tank, the issue might lie with the water-fuel separator sensor. Use a multimeter to check the sensor's voltage, which should normally be 12V and 5V. If abnormal, and after confirming it's not a wiring or connection issue, replace the water-fuel separator sensor.
119
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.