What is the reason for the rattling noise from the Audi A6L chassis when passing over speed bumps?

What is the wheelbase of the Baojun RM5?

The wheelbase of the Baojun RM5 is 2750 millimeters. The length, width, and height of this vehicle are 4705 millimeters, 1806 millimeters, and 1625 millimeters respectively. This is an MPV model under the Baojun brand, featuring a relatively spacious interior. The Baojun RM5 is equipped with either a 1.5-liter naturally aspirated engine or a 1.5-liter turbocharged engine. The 1.5-liter naturally aspirated engine delivers a maximum power of 73 kilowatts and a maximum torque of 143 Newton-meters, while the 1.5-liter turbocharged engine offers a maximum power of 108 kilowatts and a maximum torque of 250 Newton-meters. In terms of the center console, the new Baojun RM5 adopts an integrated design combining a 12.3-inch instrument panel with a 10.25-inch central control screen, providing a new display space for technology connectivity and intelligent driving information.

18

1

Share

Does the Baojun RS5 meet the China 6 emission standard?

Baojun RS5 meets the China 6 emission standard. Some models of the Baojun RS5 comply with the China 6 standard, while others meet the China 5 standard. The models that meet the China 6 standard are sold in regions where the China 6 emission standard has been implemented, and the models that meet the China 5 standard are sold in regions where the China 6 standard has not yet been implemented. The Baojun RS5 is equipped with a 1.5-liter turbocharged engine, and the power output differs between the China 5 and China 6 models. The China 6 model's engine has a maximum power of 108 kW and a maximum torque of 250 Nm, while the China 5 model's engine has a maximum power of 111 kW and the same maximum torque of 250 Nm. The Baojun RS5 is positioned as a compact SUV, with body dimensions of 4570mm in length, 1870mm in width, and 1720mm in height, and a wheelbase of 2700mm. The front suspension uses a MacPherson independent suspension, and the rear suspension uses a multi-link independent suspension.

14

4

Share

What engine is used in the New Baojun RS3?

New Baojun RS3 uses a 1.5L naturally aspirated engine. Here are the relevant details: Introduction to the New Baojun RS3 engine: The New Baojun RS3 is equipped with a 1.5L naturally aspirated engine. This engine delivers a maximum horsepower of 105 HP and carries the model designation L2B. It is a commonly used engine in New Baojun vehicles. Constructed from aluminum alloy materials, this engine offers superior heat dissipation capabilities and relatively lightweight properties. Introduction to the New Baojun RS3: The Baojun RS3 is a compact SUV under the Baojun brand. The vehicle measures 4300mm in length, 1750mm in width, and 1600mm in height, with a wheelbase of 2550mm. In terms of interior design, the RS3 incorporates more convenient vehicle networking features, allowing users to remotely locate the vehicle, start the engine, activate air conditioning, and other functions via smartphone. Additionally, the voice control system supports WeChat message sending/receiving through voice commands.

20

1

Share

What is the appropriate tire pressure for the Mercedes-Benz C260L?

The recommended tire pressure for the Mercedes-Benz C260L is between 2.4bar and 2.5bar. Due to seasonal factors, the tire pressure can be increased by 0.2bar in winter and reduced by 0.1bar in summer. This data complies with the international GBT2978-2008 standard. The tire pressure can be viewed on the multifunction display screen on the steering wheel. The Mercedes-Benz C260L is equipped with an active tire pressure monitoring system, and the dashboard displays the tire pressure information for all four wheels, allowing the driver to clearly identify which tire is experiencing an issue. Generally, a tire pressure exceeding 2.8bar is considered too high, while a pressure below 2.0bar is too low. Hazards of overinflation: Reduced tire friction and adhesion, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates wear on the central tread pattern, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overstretches the tire cords, reducing elasticity and increasing the load on the vehicle during driving. Hazards of underinflation: Increased friction with the road surface, leading to higher fuel consumption; makes the steering wheel heavy and prone to deviation, compromising driving safety; increases movement in various parts of the tire, causing abnormal heat due to excessive rolling; weakens the function of cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, damaging the bead area and causing abnormal wear; multiplies friction with the ground, sharply raising tire temperature, softening the tire, and drastically reducing its strength. High-speed driving under these conditions may result in a tire blowout. If the tire pressure monitoring indicator light illuminates (a yellow symbol featuring an irregular circle without a seal, with four small spikes below and an exclamation mark inside), it is generally due to one of the following three reasons: Abnormal tire pressure: Typically, an alarm is triggered when the pressure is below 1.8bar or above 3.0bar. In this case, the tires should be checked and the pressure adjusted. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure monitoring system is not reset promptly, it may still record the previous data, causing the indicator light to remain on. Simply reset the tire pressure monitoring system to resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, which monitors tire pressure, is installed inside the tire and connected to the inflation valve. If the sensor is damaged due to impact while driving, the tire pressure warning light will illuminate. In such cases, the only solution is to replace the sensor with a new one.

6

2

Share

Can You Make a U-Turn Over White Dashed Lines?

White dashed lines allow for U-turns, provided there are no signs prohibiting U-turns or left turns, or dedicated U-turn traffic signals. Vehicles can make a U-turn without interfering with normal traffic flow and ensuring safety. Permissible U-turn scenarios: Intersections with U-turn signs: If there is a clear U-turn sign at an intersection, a U-turn is permitted. If there is a U-turn traffic signal, follow its instructions. In the absence of a signal, make a U-turn based on the specific situation, ensuring it does not obstruct other vehicles or pedestrians. Intersections without explicit U-turn or left-turn prohibition signs: If there are no signs explicitly prohibiting U-turns, a U-turn is allowed. "No explicit prohibition" means the intersection lacks signs like "No U-turn," "No Left Turn," or a solid center line, in which case a U-turn can be safely made. Yellow grid lines also permit U-turns: Yellow grid lines are no-parking zones marked at intersections prone to congestion due to temporary stops, important facility entrances, or other designated areas. Stopping on these lines (including waiting at traffic lights) is a violation. While parking is prohibited in yellow grid zones, U-turns are allowed unless there is a central barrier. Yellow grid lines without barriers are equivalent to "U-turn permitted." Intersections with U-turn signals: This is straightforward—if there is a U-turn signal, wait for the green light to proceed. Simultaneous "No Left Turn" and "U-turn Permitted" signs: U-turns are allowed even if left turns are prohibited, but "No U-turn" does not mean "No Left Turn." Precautions when making U-turns at intersections: Check road markings—solid lines prohibit U-turns under any circumstances. Continue driving to find a suitable spot. If there is a "No Left Turn" sign, even without a "No U-turn" sign, U-turns are not allowed at that intersection because U-turns inherently involve a left turn. U-turns must be made from the innermost left-turn lane. If you are in the second left-turn lane, a U-turn is not permitted at that intersection. Always yield to straight-moving vehicles. Only proceed with a U-turn if it does not disrupt their flow; otherwise, you bear full liability for any accidents. Near intersection stop lines, lanes often have guiding arrows. Not all leftmost lanes have left-turn arrows—some may have straight arrows. Even without explicit "No U-turn" signs, U-turns are prohibited in such lanes. U-turns must not be made on crosswalks, as this is also a traffic violation.

19

5

Share

What are the reasons for the engine warning light in Volkswagen CC?

The engine warning light in Volkswagen CC may illuminate due to the following 7 main reasons: Sensor malfunction: This includes sensors such as coolant temperature, crankshaft position, air flow, intake temperature, and oxygen sensors. When these sensors are damaged, have poor contact, or experience signal interruption, the vehicle's ECU cannot accurately obtain engine data, triggering the engine warning light. Fuel and oil quality issues: Failure to use the fuel and engine oil as specified by the manufacturer may cause engine wear, leading to the warning light activation. Poor combustion of air-fuel mixture: This can result in engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the warning light will illuminate as an alert. Causes include faulty spark plugs, ignition coils, fuel pump issues, or clogged fuel lines. Turbocharging problems: Issues with the intake turbocharging pipeline or turbocharger can also trigger the engine warning light. The most common issue is turbocharger damage, accompanied by symptoms such as oil leakage, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Intake problems: If the vehicle's air intake is compromised, it may lead to engine pipeline blockages, potentially causing the warning light to illuminate. A dirty or uncleaned air filter can also cause intake issues. Exhaust problems: Exhaust system faults can activate the engine warning light. Common causes include rear oxygen sensor failure, catalytic converter issues, or faults in the exhaust camshaft and bearings. The catalytic converter is most frequently affected, often due to the use of leaded gasoline, lead or silicon-based lubricant additives, physical damage, or fuel system malfunctions. Anti-theft system malfunction: If the vehicle's electronic anti-theft system fails or the anti-theft controller is incompatible with the engine ECU, the engine may not operate properly, and the warning light will illuminate. Steps to address the engine warning light: First, check if the engine is running normally. Look for symptoms such as shaking or black smoke. If present, avoid restarting the engine. Note: Never restart the engine if the red warning light is on. If the engine can be started, turn it off and wait 5-10 minutes. Without pressing the brake, press the start button once or turn the key halfway to the "ON" position (without engaging the clutch). The vehicle will enter self-inspection mode. After 5-10 seconds, observe if the warning light turns off. If the warning light remains on, visit a service center promptly. Technicians can use a portable diagnostic tool to read the fault code, identify the issue, and perform targeted repairs.

2

0

Share

What is the reason for the rattling noise from the Audi A6L chassis when passing over speed bumps?

What is the wheelbase of the Baojun RM5?

Does the Baojun RS5 meet the China 6 emission standard?

What engine is used in the New Baojun RS3?

What is the appropriate tire pressure for the Mercedes-Benz C260L?

Can You Make a U-Turn Over White Dashed Lines?

What are the reasons for the engine warning light in Volkswagen CC?

Is It Necessary to Use the Start-Stop Function?

Has the O License Plate Been Canceled Nationwide?

Is the Smell of Tires Harmful to Health?

Is the Baojun RM5 a seven-seater?