What is the reason for the Magotan's reversing camera not switching when reversing?
4 Answers
The reason the reversing camera does not switch may be due to a faulty camera. You can check if the camera has power or replace it with a new one to resolve the issue. Below is an introduction to related content: Reversing Camera: The reversing camera, also known as a parking assist system, or reversing visual system, or onboard monitoring system, etc. English name: vehicle-backup-camera. This system is widely used in various large, medium, and small vehicles for reversing or driving safety assistance. The car reversing camera is a complete system, which can also be added with a camera device and an onboard display. Of course, the 360-degree panoramic visual system makes up for the limitation in China where only radar or a single rearview camera provides images. The panoramic visual system can have four video outputs, namely front, rear, left, and right.
The reversing camera not switching when reversing is quite frustrating for Magotan owners. I've encountered similar issues, usually caused by the reverse signal not being transmitted. When shifting to R gear, the trigger switch may be aged or stuck, preventing the system from recognizing that you're reversing. Loose or oxidized camera wiring harness is another common cause, especially after car washes or rainy days when moisture enters the connectors and interrupts the signal. Software issues can also be problematic, such as the multimedia host needing a firmware update. I recommend starting with simple solutions: check if the reverse-related fuse is blown—it's clearly marked in the engine compartment fuse box. If that doesn’t work, try restarting the vehicle or resetting the system settings. Safety first—reversing at night without a camera is quite dangerous, so get it checked by a professional shop as soon as possible. Avoid disassembling it yourself to prevent further damage. In short, fix minor issues promptly, take preventive measures, and keep the camera clean daily.
I've also dealt with the malfunctioning rearview camera on the Magotan. The core issue might be a faulty reverse light switch, where the signal isn't transmitted to the head unit when shifting to R gear, or a problem with the camera itself. Loose wiring connections can directly interrupt the display, especially common in older cars. A blown fuse is relatively easier to diagnose, located on the left side of the in-car fuse box. Not enabling auto-switching in settings or system freezes can also be culprits—try turning off the car and restarting it. The rearview camera is crucial for safety, so don't ignore it, especially in neighborhoods with tight parking. If it happens repeatedly, don't hesitate—take it directly to a 4S shop or repair center for a comprehensive diagnosis. They'll use tools to test signals and prevent potential hazards. Mention electronic device checks during routine maintenance for convenience and peace of mind.
When reversing, the camera not switching on can have various causes. The reverse signal switch may have failed, preventing the camera from activating when shifting gears; the camera connection could be loose or dirty, obstructing the display; the system software might have a bug, such as the multimedia host needing an update; or there could be a short circuit in the wiring. Don’t panic—the Magotan is well-designed, but minor issues are common. Try restarting the vehicle or checking the settings menu. From a safety perspective, if the issue isn’t severe, rely on the rearview mirrors for now, but it’s best to get it fixed in the long run. When driving with friends or family, a non-functional camera increases risks, so have a technician resolve it as soon as possible. For prevention, regularly clean the lens to avoid dirt buildup.
