What is the reason for the fuel pump not receiving power when the ignition is turned on?

1 Answers
VanLayla
07/29/25 4:20pm
The reasons for the fuel pump not receiving power when the ignition is turned on: 1. Check if the car battery is dead: If the battery is dead, this situation will occur, and the battery needs to be recharged. 2. Check if the fuel relay is loose: It's best to have a mechanic check whether fuel can be supplied when the ignition is turned on. If fuel comes out, there is no problem. 3. Check if the car's fuel line is clear: Please send it to a repair shop for maintenance. 4. Check if the car's distributor is old and needs maintenance: If it is old, remove it for servicing, re-lubricate it, and it will work fine after reinstallation. 5. Check if the damper wire is aged or broken: If so, replace it with a new one.
Was this review help?
2
4
Share
More Forum Discussions

How to Remove Tree Sap from Car Body?

When parking under trees frequently, it's best to develop a habit of inspecting the car's paint surface. If tree sap is found, clean it promptly to avoid affecting the car's appearance or damaging the body. Methods to remove tree sap from a car body are as follows: 1. If the sap is not dry, use a tissue to wipe it off first, then clean with a damp towel. If it's sticky and hard to remove, spray all-purpose cleaner and wipe; generally, this can handle it easily. 2. If the sap is semi-dry, spray a sap remover first to dissolve it, then spray several more times and wipe off with a towel. 3. For dried sap that hasn't corroded the paint, gently scrape it off with a fingernail and a towel, then spray sap remover, and finally treat the marks with polishing wax.
17
5
Share

Is It Safe to Apply for Temporary License Plates Once a Month for a Water Car?

Applying for temporary license plates once a month for a new car is relatively safe, but if it's an old car, it's more likely to be checked on highways. Below is relevant information about water cars: 1. Concept: A water car refers to a smuggled vehicle or a car without proper documentation. Smuggled cars are 'dirty' vehicles stolen from abroad. Smuggling is generally divided into whole-car smuggling and cut-up smuggled cars. 2. Purchasing Smuggled Cars: Buying a smuggled car comes with significant psychological pressure, as there's always a sense of unease, and any traffic violation can easily reveal it as a cloned plate. Additionally, there are certain risks involved, as the market for smuggled cars is mixed with unscrupulous dealers, making it easy to fall into a trap.
8
3
Share

What Are the Causes of Unstable Idle Speed in Car Engines?

Car engine idle speed instability can be caused by: 1. Excessive oil deposits or carbon buildup in the throttle body; 2. Weak spark due to faulty spark plugs; 3. Clogged fuel lines or intake manifold issues; 4. Sensor malfunctions leading to ECU control failure; 5. Blown fuses or faulty ignition modules; 6. Poor fuel quality. Solutions for unstable idle speed include: 1. Cleaning or replacing the idle speed control valve and performing basic idle speed settings with a specialized decoder; 2. Locating and sealing leaks or replacing affected components; 3. Adjusting or replacing the throttle position sensor; 4. Cleaning and inspecting each fuel injector's spray volume to ensure no clogs or leaks; 5. Removing carbon deposits from the EGR valve or replacing it.
4
5
Share

What is another name for turbine oil?

Turbine oil is also known as TSA steam turbine oil, which is a type of oil used in turbine engines. The following is a related introduction to turbine oil: 1. Purpose: It is used in steam turbines in power plants, hydroelectric generators in hydropower stations, and other applications that require deep refined lubricating oil. It is suitable for high-speed mechanical lubrication and primarily functions to lubricate, dissipate heat, cool, and regulate speed. 2. Viscosity grade: Turbine oil is classified into ISO viscosity grades of 32, 46, 68, and 100. Its density changes with the kinematic viscosity of the steam turbine oil. The main parameter evaluated for steam turbine oil is kinematic viscosity, where dynamic viscosity/density = kinematic viscosity. The approximate density range of steam turbine oil is between 0.9 and 0.91.
12
1
Share

How to turn off the daytime running lights on the JEEP Compass?

JEEP Compass daytime running lights cancellation steps are as follows: 1. Turn off the car. 2. Turn the turn signal to the left. 3. Turn on the high beam, then turn on the ignition switch, and after a few seconds, you will hear a sound indicating successful cancellation. The purpose of the JEEP Compass daytime running lights is to make the vehicle more easily recognizable during daytime driving. This type of light is a signal light, and its function is not to allow the driver to see the road clearly, but to let others know that a car is approaching. The greatest effect of daytime running lights is not in aesthetics, but in providing vehicle recognition.
15
3
Share

Why do some cars not have a spare tire?

Not having a spare tire is because the car uses run-flat tires (also known as "puncture-proof tires"), which allow the vehicle to continue driving even if the tire loses all pressure. Here is some related information about spare tires: 1. Storage lifespan: A properly stored spare tire can be used for more than 6 years, but it must be replaced with a brand new one after 8 years. 2. Types of spare tires: Full-size spare tires, which are identical in specification to the original car tires; Non-full-size spare tires, which are slightly smaller in diameter and narrower in width compared to regular tires; Run-flat tires, which are also called "puncture-proof tires" or "tire pressure monitoring system tires"; Foldable spare tires.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.