···
Log in / Register

What is the range of the Nissan Sylphy Zero Emission?

1Answers
Juan
07/29/2025, 06:28:49 PM

The range of the Nissan Sylphy Zero Emission is 400KM. Here are some details about the Sylphy: 1. Exterior: The Nissan Sylphy Zero Emission adopts the front face of the new Leaf, with a blue closed grille that easily distinguishes it from the standard Sylphy. The side and rear designs largely follow the Sylphy's styling, with the addition of exclusive electric vehicle badges in the details. 2. Powertrain: The Nissan Sylphy Zero Emission is equipped with a permanent magnet synchronous motor that delivers a maximum power of 109 horsepower and a peak torque of 254Nm. It features a 38KWh ternary lithium-ion battery pack. 3. Charging: The charging ports of the Nissan Sylphy Zero Emission are located in the most prominent blue diamond-shaped grille at the front. Lifting the cover reveals two charging ports: one for fast charging and one for slow charging. In fast charging mode, the battery can reach 80% capacity in 45 minutes, while a full charge in slow charging mode takes 8 hours.

Was this review help?
116
Share
More Q&A

How to Remove the Headlight Switch of a Passat?

Method for removing the headlight switch of a Passat: 1. Turn off the car's ignition switch; 2. Press the combination switch with your fingers; 3. Rotate the switch to the right; 4. Pull the switch outward. Taking the 2020 Volkswagen Passat as an example, it belongs to the mid-size car category, with body dimensions of: length 4933mm, width 1836mm, height 1469mm, wheelbase 2871mm, fuel tank capacity 68.5l, and curb weight 1470kg. The 2020 Volkswagen Passat features a front suspension of MacPherson independent suspension and a rear suspension of multi-link independent suspension. It is equipped with a 1.4l turbocharged engine, delivering a maximum horsepower of 150ps, maximum power of 110kw, maximum torque of 250nm, paired with a 7-speed dual-clutch transmission.
101
Share

How to Remove the Ignition Coil of Qashqai?

Method to remove the ignition coil of Qashqai: 1. Open the ignition coil cover on top of the engine; 2. Use a pentagon wrench to remove the fixing screws of the ignition coil; 3. Disconnect the power plug of the ignition coil; 4. Gently pry it up with a screwdriver and take out the ignition coil; 5. Install the new ignition coil and tighten the screws; 6. After connecting the power plug, cover the top cover. Taking the 2021 Intelligent Edition Qashqai as an example, its body dimensions are: 4401mm in length, 1837mm in width, and 1593mm in height, with a wheelbase of 2646mm and a fuel tank capacity of 57 liters. The 2021 Intelligent Edition Qashqai features a MacPherson independent front suspension and a multi-link independent rear suspension. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 151PS, a maximum power of 111kW, and a maximum torque of 194Nm.
113
Share

How Long Can a Car Key Last with Low Battery?

There is no guaranteed duration for how long a car key with low battery can last, so it is advisable to replace the battery as soon as possible. The power consumption of a car key depends on its usage frequency. For battery-powered devices, the more frequently they are used, the more power they consume. Symptoms of a low battery in a car key include: 1. Reduced sensing distance of the car key; 2. Needing to press the remote multiple times for a response; 3. Dim indicator light on the car key. It is important to note that if the car is exposed to strong magnetic fields, it can affect the key's signal and electromagnetic waves. Additionally, if the car battery is dead and cannot receive the key's signal, these situations can cause the car key to malfunction.
101
Share

What is the Difference Between Dual Clutch and Continuously Variable Transmission?

The differences between dual clutch and continuously variable transmission are: 1. Different working principles: The dual clutch consists of two sets of manual transmissions, with two clutches respectively controlling the connection and disconnection of two sets of gears and the engine; the continuously variable transmission consists of two pairs of variable diameter pulleys and a steel belt. 2. Different vehicle adaptations: Dual clutch transmissions are mainly divided into dry and wet types, primarily used in the European automotive market; continuously variable transmissions are suitable for use in small-displacement and lighter-weight vehicles. 3. Different driving smoothness: The dual clutch transmission system is a combination of two sets of gears, with fast shifting speed and minimal power loss during power transmission; the continuously variable transmission's mechanism consists of two cone wheels and a steel belt, with no shifting process in the automatic transmission, resulting in minimal shifting sensation.
120
Share

What is the usage of paddle shifters?

The usage of paddle shifters is: 1. Power on and ignite the vehicle; 2. Press the upshift paddle with your hand and then release the brake; 3. After releasing the brake, start the vehicle and gently press the accelerator. Paddle shifters are gear-shifting devices installed for semi-automatic clutches in cars, allowing gear changes without stepping on the clutch pedal by simply pulling the paddle shifters. Types of paddle shifters: 1. Fixed type: The paddle shifters remain stationary relative to the dashboard, meaning they do not rotate with the steering wheel during turns; 2. Follow-up type: The paddle shifters remain stationary relative to the steering wheel, meaning they rotate together with the steering wheel as a whole during turns.
109
Share

What does it mean when the service light is on in a Peugeot 408?

When the service light comes on, it is a reminder for the car owner to perform maintenance on the vehicle. Purpose of the service light: The service light is set up in the car to illuminate continuously when the vehicle reaches a certain mileage, reminding the owner to perform timely maintenance. Note: Different car manufacturers set different maintenance intervals, and it is generally recommended to follow the vehicle's user manual for maintenance. After maintenance is completed, the service light must be reset to zero using the appropriate procedure so that it can start recording again. If the light is not reset, it will remain on even after maintenance has been performed.
105
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.