···
Log in / Register

What is the range of the electric vehicle Q5 e-tron?

3 Answers
StMiguel
09/07/25 4:45am
The range of the electric vehicle Q5 e-tron is 560 kilometers. The following is an introduction to related content about new energy vehicles: Hybrid vehicles: Equipped with batteries that can conveniently recover kinetic energy during downhill driving. In busy urban areas, the internal combustion engine can be shut down, and the vehicle can be driven solely by the battery, achieving 'zero' emissions. Pure electric vehicles: The technology is relatively simple and mature, and they can be charged wherever there is a power supply. Fuel cell vehicles: They offer zero or near-zero emissions, reduce water pollution caused by oil leaks, lower greenhouse gas emissions, and operate smoothly with no noise.
Was this review help?
16
1
Share
VanJuliet
09/19/25 4:09am
I've been driving this Q5 e-tron for a while now, and the range feels quite realistic. The official WLTP rating is about 515 kilometers, and in my daily city commuting, I can average around 480 kilometers. With stop-and-go traffic and lower speeds, the battery drains slower. On long highway trips, it consumes power faster—driving at 120 km/h might reduce the range to around 420 kilometers, but planning charging stops solves that. I have a home charger installed, so I charge it once a week at night, saving a lot on electricity costs compared to refueling. Temperature has a big impact; in cold winters with the heater on, the range drops by about 10%, so preheating the battery is recommended. The interior is luxurious, spacious, and the ride is quiet. If range anxiety is a concern, try ECO mode—gentle acceleration can squeeze out some extra distance. Overall, the 500-kilometer battery is more than enough for regular trips and proves reliable.
Was this review help?
20
3
Share
Expand All
JohnLee
11/02/25 4:32am
From a technical perspective, the Q5 e-tron's large 83kWh battery pack delivers an impressive WLTP range of 515km. I've studied its features: excellent aerodynamic design reduces high-speed drag, while regenerative braking recovers energy during traffic congestion to extend range. Temperature impacts are notable - battery efficiency drops by 20% in cold conditions, but the heat pipe system performs well. It supports fast 170kW DC charging, reaching 80% in just 30 minutes from empty, which is very convenient. The battery comes with a 10-year warranty, featuring slow degradation and reliable safety. Compared to the Model Y, while range is similar, the Q5 offers smoother driving dynamics. In my daily mixed-condition driving, I average 450km, with slight reductions when using AC or carrying full loads. Driving steadily with cruise control can bring actual range close to the claimed figure.
Was this review help?
2
4
Share
Expand All
More Forum Discussions

How early can the vehicle annual inspection sticker be obtained?

Vehicle annual inspection stickers can be obtained 3 months in advance. Below is relevant information about vehicle annual inspections: Introduction to vehicle annual inspection: The timing of vehicle annual inspections is not calculated based on specific dates, but rather by month. If a vehicle's annual inspection is due on September 10th, the inspection can be conducted in advance during July, August, or September. Important notes: Vehicles that fail to undergo annual inspection on time and continue to be driven will be subject to fines and 3 penalty points, and the vehicle may be impounded. If the annual inspection is overdue, previously purchased vehicle insurance will not be valid. In case of any traffic accidents during this period, the insurance company will not provide compensation.
13
3
Share

How to Reset the Tire Pressure Monitoring Light on the Outlander?

The method to reset the Outlander's tire pressure light is as follows: When the warning light comes on, locate the tire pressure reset button below the left side of the steering wheel. Press and hold it for a few seconds until the tire pressure warning light turns off, indicating a successful reset. If manual reset fails, professional technicians should be consulted to clear the fault code. The steps to reset the Outlander's tire pressure warning light are detailed below: 1. Drive slowly to a safe location and park. Turn off the engine, wait for 1-2 minutes, and then restart the vehicle. After the vehicle stabilizes, check the tire pressure values displayed on the dashboard. 2. Both underinflation and overinflation can trigger the tire pressure light. Drive slowly to a car repair shop or auto beauty shop to adjust the tire pressure. If you have a personal inflation device, you can adjust the tire pressure on the spot. 3. While inflating or deflating the tires, observe the tire pressure light on the dashboard. Stop inflating once the light turns off. If overinflated, release the excess air. 4. If the tire pressure light remains on after adjustment, a manual reset may be required. Locate the settings button on the vehicle's central console, typically labeled 'SET,' to reset the tire pressure. 5. If the vehicle does not support manual operation, ensure the tire pressure is normal and have a technician use a specialized diagnostic tool to clear the fault code.
14
0
Share

Is Power Steering Fluid the Same as Transmission Fluid?

Power steering fluid and transmission fluid are not the same. Transmission fluid can be used as power steering fluid in cars, but power steering fluid cannot be used as transmission fluid. The main component of transmission fluid is lubricating oil, and the additives used in transmission fluid and power steering fluid are different. Transmission fluid and power steering fluid are absolutely not interchangeable. The main function of transmission fluid is to keep the gear system clean, lubricate the car's transmission device, and extend its service life. Power steering fluid is mainly used to increase driving comfort, automatically providing steering force when the driver is operating the vehicle, making the driving process easier and reducing steering fatigue for the driver.
5
1
Share

What are the symptoms of a broken transmission mount pad?

Transmission mount pad failure symptoms: The car will vibrate when starting, and the stability of the car will be reduced during driving. After the transmission mount pad is damaged, it needs to be replaced immediately. If the transmission mount completely breaks during driving, the support force of the transmission will lose balance. Whether it's an automatic or manual transmission model, the gear shifting will become abnormal during operation. A damaged transmission mount can also cause jerking during transmission operation. The reason for this phenomenon is that the transmission oil temperature is too high, and impurities have appeared inside the transmission oil, leading to jerking during operation.
6
4
Share

Will there be any impact after resetting the transmission?

Resetting the transmission may have some impact, such as increased fuel consumption and gear shifting jerks, but these issues will resolve after some time because the transmission's computer has a learning function. There are three common types of automatic transmissions in vehicles: dual-clutch transmission (DCT), automatic transmission (AT), and continuously variable transmission (CVT). The dual-clutch transmission simply adds an extra set of clutch and shift control mechanism compared to a manual transmission. One set of clutches controls the odd-numbered gears, while the other controls the even-numbered gears. The CVT transmission offers relatively smoother gear shifting. The AT transmission is an automatic transmission with a complex structure and mature technology.
11
5
Share

Where is the OBD interface of Peugeot 3008?

The OBD interface of Peugeot 3008 is located under the steering wheel, specifically at the place where the driver's left knee touches. Inside is the OBD interface. The OBD interface is also called the computer interface, which is translated into Chinese as the on-board diagnostic system. This system constantly monitors the operating conditions of the engine and the working status of the exhaust after-treatment system. Once a problem is detected, it will record and store the issue. The Peugeot 3008 features a rounded front end, with the engine hood, full front bumper, fenders, and A-pillar all exhibiting a plump and smooth design. This car also offers eight color options for consumers to choose from: Pearl Black, Deep Sea Blue, Neptune Gray, Rainforest Brown, Babylon Red, Mist Gray, Crystal Silver, and Ivory White.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.