What is the purpose of a dash cam?

1 Answers
VanNorah
07/25/25 2:13am
The functions of a dash cam are: 1. It can record video images and sound of the entire driving process, providing evidence for traffic accidents; 2. For car owners who enjoy road trips, it can be used to document the scenery along the way. A dash cam consists of a microprocessor, data storage, real-time clock, display, lens module, operation keys, printer, data communication interface, vehicle speed sensor, and data analysis software. The installation method of a dash cam is: 1. Use a clip to fix the recorder near the car's rearview mirror; 2. Determine the wiring plan based on the length of the power cord; 3. Tuck the power cord into the gap of the car's ceiling and then down along the door frame to behind the glove box.
Was this review help?
13
2
Share
More Forum Discussions

How to Check the Turbocharger on a Mercedes-Benz Smart?

Open the trunk lid of the Mercedes-Benz Smart and lower the rear luggage panel. Find a suitable tool to secure the luggage compartment sound and heat insulation pad. Remove the six bolts of the maintenance cover, take off the maintenance cover, and you can see the engine of the Mercedes-Benz Smart. The component with many pipes inside the engine is the exhaust pipe. On the exhaust pipe, you can see a larger component resembling a turbine with many thick and thin rubber pipes—that is the turbocharger.
20
3
Share

Should the 10th-generation Accord use 92 or 95 octane fuel?

The 10th-generation Accord officially recommends using unleaded gasoline with an octane rating of 92 or higher, meaning both 92 and 95 octane gasoline are suitable. Below is relevant information: In terms of safety features, the 10th-generation Accord is equipped with the Honda SENSING intelligent driving assistance system, LKAS lane keeping assist system, RDM lane departure mitigation system, ACC active cruise control with LSF (low-speed follow system), CMBS collision mitigation braking system, LWC blind spot display system, TSR traffic sign recognition system, PSS integrated rear parking sensors, and more.
1
0
Share

How to set the next maintenance mileage for the Tiguan?

Tiguan does not have the capability to set the next maintenance mileage. The Tiguan is a compact SUV under Volkswagen. Taking the 2017 Tiguan 1.8L as an example: the exterior dimensions are 4506mm in length, 1809mm in width, and 1685mm in height, with a wheelbase of 2684mm. The Tiguan is equipped with a 1.8L turbocharged engine, delivering a maximum horsepower of 160hp and a maximum torque of 250Nm. The torque peak occurs between 1500 to 4500 rpm, while the maximum power output is 118kW, achieved between 4500 to 6200 rpm. The fuel injection system is direct injection.
15
0
Share

How to reset the maintenance light on a Besturn B50?

Turn on the ignition switch to start the car, and rotate the key under the steering wheel to power up the vehicle. Otherwise, the maintenance light cannot be reset to zero. Then locate the MODE button on the left side of the multifunction steering wheel and press it. Next, find the CANC button on the right side of the multifunction steering wheel, hold it down for a long time, and release it after hearing a beep. Observe the wrench light on the dashboard, which is the car maintenance reminder light. If the maintenance light disappears, it indicates that the reset is complete.
10
3
Share

How to Use the Air Conditioning in the Envision in Summer?

Press the brake pedal and push the one-touch start button. On the center console panel, locate the air conditioning system, which is positioned directly in front of the gear lever. To activate the air conditioning system, adjust the temperature control to the blue position. For automatic air conditioning, you can set a specific temperature. Use the blue button to lower the air conditioning temperature and increase the fan speed to cool the vehicle. For quick cooling in summer, utilize the principle that hot air rises and cold air sinks by adjusting the position of the air vents to face slightly upwards.
15
5
Share

How to Set Up Automatic Window Closing After Locking a BMW?

To set up automatic window closing when locking the car, first enter the vehicle's system settings interface inside the car and observe the relevant system layout. On the system settings page, select the window and door switch option. If there is an option in the system, choose "All Windows." After setting up the system, manually raise all the windows in the BMW and close them. Press and hold the lock button on the car key to set the automatic window closing function. When you forget to close the windows and lock the car, all windows will automatically close.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.