What is the method to reset the maintenance light of Kia K5?

[LeElias]

The method to reset the maintenance light of Kia K5 is: 1. Turn on the car power, press the toggle button on the right side of the steering wheel; 2. Adjust to the user settings interface, where you can see the maintenance settings option; 3. Select the maintenance settings option and press the OK button to enter maintenance settings; 4. Press and hold the OK button to reset the oil maintenance mileage time, completing the maintenance light reset. Taking the 2020 Kia K5 as an example, its body dimensions are: length 4980mm, width 1860mm, height 1445mm, wheelbase 2900mm, fuel tank capacity 60L, curb weight 1472kg. The 2020 Kia K5 has a front suspension of MacPherson independent suspension and a rear suspension of multi-link independent suspension. It is equipped with a 1.5L inline 4-cylinder turbocharged engine, with a maximum horsepower of 170PS, maximum power of 125kW, maximum torque of 253Nm, matched with a 7-speed dual-clutch transmission.

[LeJosiah]

I've been driving my Kia K5 for several years, and that little wrench light keeps coming on after every service, which is quite annoying. Learning to reset it myself is actually pretty simple: First, turn off the engine and make sure the key is in the OFF position. Then, press and hold the TRIP button on the dashboard—don't let go. Next, turn the key to the ON position (the position before starting the engine). Keep holding the button for about 10 seconds, and you'll see the light blink a few times before turning off. Then, release the button, and you're done. Sometimes, if I get the sequence wrong or don't hold the button long enough, the light stays on, but just repeat the steps. It's best to keep track of service intervals manually and not rely too much on this light to avoid forgetting oil changes—safety first!

[DelAshley]

As a seasoned car repair veteran, resetting the maintenance light is routine. The standard method for the Kia K5 is straightforward: turn off the engine, press and hold the TRIP button, turn the key to the ACC position without starting the car, keep the button pressed for about ten seconds, and release it when the light goes out. Alternatively, you can use an OBD scanner by plugging it into the port and selecting the maintenance light reset for more precision. Beginners should be careful not to operate while driving, as it can be distracting. Make sure to have the right tools ready to avoid any mishaps that could affect the electrical system. Develop a habit of regular checks; after resetting, you can drive safely for a few thousand kilometers without worrying about engine damage from overdue maintenance.

[OPiper]

When I first bought my Kia K5, I would panic whenever I saw the dashboard light come on, thinking the car was broken. Actually, that was the maintenance reminder light, and resetting it makes it stop. The steps are simple: After turning off the car, immediately hold down the TRIP button near the steering wheel without letting go; then turn the key to the ON position; wait for the light to flash or go off before releasing the button. The whole process takes less than 30 seconds, and practicing it a few times will make it second nature. Remember, resetting is to record the next maintenance time—don’t delay too long to avoid damaging the engine.

[TaylorLynn]

Safe driving relies on attention to detail. When resetting the K5 maintenance light, always operate with the engine off: first turn off the engine, then press the TRIP button, turn the key to the ON position, and wait for the light to go out before releasing. Be steady with your movements—quick pushes or slow turns may accidentally trigger the circuit. DIY is fine, but when in doubt, consult a 4S shop to avoid costly malfunctions from mishandling. Also, don't just reset the light and skip actual maintenance—this prevents engine aging issues.

[DeKarter]

Want to save money by resetting the Kia K5 maintenance light yourself? Here's how: After turning off the engine, press and hold the TRIP button on the dashboard, turn the key to the ACC position, wait patiently for 10-15 seconds until the light goes out, then release the button. Keep a small manual handy to note the steps, avoiding unnecessary trips to the dealership. Once the light is reset, it means the next maintenance reminder is set—don't let it mislead you into overdue servicing. Also, regularly check fluid conditions and maintain the engine well to extend its lifespan and reduce overall expenses.